Did your screen have a white little line on the screen in the middle left part? Cuz mine does. It stays black with that little line (btw the line is not blinking) and after about a minute it just goes to plan black with no line on it. the keyboard turns on but the mouse doesn’t. Do you know what to do?
@@muzic_kidz1134 no I have no clue what happened, but check your motherboard manual to see if there are debug leds, these are usually on the right side of the motherboard and light up showing you whether you have a cpu, ram, gpu error
@@galaxymc8286 did your motherboard show what’s wrong ? Mine says cpu and ram I over clocked my ram also now idk what to do I took apart everything and put it back together
I moved 3 computers to different cases yesterday, swapped around GPUs, and had various issues pop up with booting. This saved me from having no video output! I thought I messed up massively. Thanks a ton!!!
@@asherodiong6122 when your PC is turned off try one of these : 1. try to clean ur ram pins with eraser, or 2. reset your motherboard by unplugging the C-mos battery and then press and hold the power button to sink the remain electricity
@@SomTips I have a problem, so I bought a new Mainboard, The Gigabyte Aorus B450 Pro, I combined it with a Ryzen 5 3600 and 32 GB 3600 Speed ram from corsair, and with an m.2 ssd. But when I try to turn on the computer there is no signal, the fans are spinning and the ram is shinning but there is no signal on the monitor, In fact the Error led light, first it was DRam, the I switch the ram then its cpu, then with the original ram both light up. The problem is, the motherboard only supports 3200mhz and my sticks are on 3600mhz. Please can someone help me
You saved my pc this is the 2nd time it happened but, 1st time on my new motherboard I was gonna cry THANK YOU SO MUCH HONESTLY FROM THE BOTTOM OF MY HEART
Thanks for showing this, the trick of shorting the JBAT1 jumper with a screwdriver fixed my problem of being unable to access the BIOS settings after I had removed one of the DIMMs.
Damn, got me back up and running. Didn't know what was wrong thought it was cables or my cpu. Thanks a bunch. Although why would this happen my mother board is only a few months old, so why would I need to do such a thing so soon?
OMFG THANK YOU SO MUCH. I bought my pc today. I paid like 1200$ for parts and I somehow fucked up xmp and my pc didnt post after that. I did this and now its working. Thank you bro
I’m praying this works , I overclocked my system . Everyone was fine then I tweaked the memory timing on the ram I’m praying this works like it did for others well see
Worked wow thank you so much bro I swear I was about to start crying I thought my rtx 3070 was broke after over clocking . This 100^ did the job ongg I was about to send it in and get it fixed and all that . THANK YOU GOD BLESS YOU GOT A NEW SUBSCRIBER
@@jayjjay3235 hey bro I have similar issue I overclocked my cpu due to my gpu being too demanding for cpu I have I overclocked it and did proccess I’m now waiting 10 mins now with battery removed I don’t get no display and my intake fan stays in turn on mode normally changes to on but please tell me this works I’m so annoyed only had built pc 4 months ago
@@DignityCFW ya it works bro i was bout to cry lmao, not really good with computers so i didnt wanna take the thing about but 100% glad i did . , just took the battery out for about 2 mins, put it back in and it worked. I actually messed with overclock again and screwed it up , tried the method and can tell you this method works 100% . Thought it was my RTX3070 at first cause no display but ya it was the RAM and taking battery out like video shows 100% works. good luck bro i know how u feel lol
@@jayjjay3235 I built a pc for my 9 year old brother who just plays minecraft and wants mod so i got him a i5 with a 1030 and when I try to get in the bios it shows a error with the battery it says it was changed or something, am not worried about the cost just dont want my lil bro to cry
Thank you so much man! I was messing around in the bios...decided to underclock my chipset and my pc wouldn't boot afterwards. I wasn't scared tho...i knew i needed to clear the bios but i didn't know how to do that. This vid helped me out a lot...now no matter what settings i change it can easily be reversed if things become unstable and i can't boot. Thanks a lot! I owe you one
Just to confirm I'm doing this right : Power down pc - Remove power cords Short Jbat1 Remove battery Insert battery after 2 - 3 minutes Add cover Power back up Sorry if this seems dumb I done a Msi bios update and I'm getting a black screen. It's killing me here 😂
The battery Trick always works haha thanks so much i messed up with some new Ram and everything went black I was having heart attacks, panic attacks and nervous breakdowns until now
Thankyou so much sir. It's work. 😍 my PC in trouble because I trying to set PC to dual monitor, and that's what i get my PC is stuck on BIOS. Grateful to you 😍
Bhai kya baaat hai maine galti sebapni ram 3200mhz pe kardi thi Bhai thank u so much bro so much thanks bro u r amazing I appreciate it man thanks alot 👍👍👍
I messed up with my PC's BIOS settings, now my system shows blank screen. I had try this method of hard reset by removing CMOS battery and by Jumpers on motherboard. My Motherboard is working fine as CPU fan, Mouse, Keyboard is running. But Nothing has worked i.e blank screen even after hard reset of BIOS. Please help me to fix this.
Hello guys, I had a similar problem yesterday. I set my rams to 3600mhz but in the wrong way at bios. I got no signal to my monitor. Nothing helped even the bios reset. The only solution was to take out the rams and put another ram stick. This helped my to get a signal and reach the bios. There you can change the settings and then you can put your previous rams back to the mainboard and everything should work. Notice: This would help you if you did something with the ram settings. Let me know if it works for you :)
What if I got problem like this : My PC running for like few hours but suddenly it become no signal and no sound, but the PC still running (the fan, LEDs inside the casing still on), is this the solution to do it?
In other words, I had a Ram speed of 3000mhz, I changed it to this a long time ago because my Ram speed is 3000mhz, but after a long, long time, I tried to go to the bios again where I need to change the Ram speed, I went there and it shows a black screen, so I tried to remove the battery that is under gpu, and when I did that, my Ram speed reseted from 3000mhz to 2133mhz and I can't change it to 3000mhz anymore, because my bio shows a black screen and even if I am trying to clean "reset my computer" also shows a black screen but it should show how many percent-% it cleared.
I want to replace the cmos battery with a new one WITHOUT changing the bios settings. I did a google search that settings will not be reset if a new battery is replaced before 1-5 minutes... Is this actually true??? Are there any other things that I have to do before replacing the battery? (like holding the power button for 10 seconds or touching pc case to remove static) An answer will be greatly appreciated :)
Thanks for this video. I tried to update bios via msi dragon center (i know, worse idea ever,i learned the hard way) no picture display afterwards. Reset by jumping the pin, it works now! P/s: I'm uninstalling msi dragon center as i typed this comment. Lol
I have tried everything to reset my Bios nothing is working i messed with settings in my bios and now no display not keyboard but my mouse LED RGB lights come on i dont get why nothing is working with this board its the Gigabyte B450m DS3H Wifi mobo with a ryzen 7 2700x i dont have another CPU with Integrated graphics to test the onboard graphics to switch everything back sadly, i just have no idea what to do
it will work on my mobo MSI A320M PRO VD/S after i update the bios into the latest version?i experience no booting after the latest update which shows 100% success...please help me bro
HELP PLEASE. My pc is turning on but no display and I unplugged my pc i took off the cmos battery and I put it back agian for about 5min and my pc didn't turn on.
Did your screen have a white little line on the screen in the middle left part? Cuz mine does. It stays black with that little line (btw the line is not blinking) and after about a minute it just goes to plan black with no line on it. the keyboard turns on but the mouse doesn’t. Do you know what to do?
My mobo msi b460m mortar bricked while using mflash from bios inside to update bios version I tried all methods like shorting pins, removing battery nothing worked Please help...
Thank You so so much. I tried to overclock ram and I pressed f1 or delete but nothing happened, I panicked and pressed the power button. I did your solution and my pc is working again. I thought I destroyed my pc and I was so worried. Thank You
In my case didn't need to use the jumpe/short JBAT1. Took the battery out after unplugging everything (all USBs/cables removed). Then I pressed the power button a few times. Then put everything back and the hdmi display was back. Worked just fine🙏
I’ve troubleshot everything I can think of, went back and checked all connections, reseated the ram, pulled the battery etc. my fans kick on and everything powers up, yet I still get no feed to the monitor… I’m starting to suspect a dead motherboard but if the motherboards dead wouldn’t all that be affected?? Everything’s brand new. Any input would be appreciated. I’m dead in the water right now
@@SomTips yea I tried everything in the video and then some. Have a tech buddy coming to look at it in a few days and hopefully he will have an answer for me. Tho I suspect he’s just gonna tell me the motherboard was dead on arrival. I’ll see if he can test the processor to further isolate but idk if he has a rig that’s compatible with a 9th gen I9(bought before I knew the performance of the cpu doesn’t really matter lol) Just curious could an older monitor possibly be the culprit?? I’ve tried on two separate ones but they are both older ones I had laying around (they are actually small TVs with rgb and hdmi ports) tried both ports and nothing on either one. Plugged in the xbox and both hdmi ports work.
I’m having the same issue with this pc I just built. Everything’s turning on and the rgb works but I’m getting no display on the monitor and I can’t get the bios to pull up. The keyboard doesn’t light up so I tried another keyboard and that one only lights up for the first second. Did you guys ever get it fixed? I’m watching this video now none other were helping me
I'm facing this issue for my msi laptop gt72s 2015 model. Not able to access bios settings, after switching on the laptop just blank screen is there nothing else.
Very helpful video. If I can make a suggestion though, I think you should add captions to your videos if you want to target English speakers. Your native accent is very thick and you speak fast which makes it hard for your audience to understand what you're saying sometimes. Other than that, thanks for the tips! I thought I was going to have to replace my motherboard! Lol.
📌Watch More Videos✅ bit.ly/somtips
Tysm i was panicing after i overclocked my ram too far. Genuinely appreciate all the people making vids like this to help others out
Hello I have a question galaxy mc
@@asyxYT yes what is it
Did your screen have a white little line on the screen in the middle left part? Cuz mine does. It stays black with that little line (btw the line is not blinking) and after about a minute it just goes to plan black with no line on it. the keyboard turns on but the mouse doesn’t. Do you know what to do?
@@muzic_kidz1134 no I have no clue what happened, but check your motherboard manual to see if there are debug leds, these are usually on the right side of the motherboard and light up showing you whether you have a cpu, ram, gpu error
@@galaxymc8286 did your motherboard show what’s wrong ? Mine says cpu and ram I over clocked my ram also now idk what to do I took apart everything and put it back together
I moved 3 computers to different cases yesterday, swapped around GPUs, and had various issues pop up with booting. This saved me from having no video output! I thought I messed up massively. Thanks a ton!!!
Did you got unexpected no signal problem?
My one showing standby mode🤣what should I do
@@flickmew99 I did. Do you know how to fix it?
@@asherodiong6122 when your PC is turned off try one of these :
1. try to clean ur ram pins with eraser,
or
2. reset your motherboard by unplugging the C-mos battery and then press and hold the power button to sink the remain electricity
I cannot express how much I appreciate you making this video. I wish you a great and prosperous life.
So nice of you
@@SomTips I have a problem, so I bought a new Mainboard, The Gigabyte Aorus B450 Pro, I combined it with a Ryzen 5 3600 and 32 GB 3600 Speed ram from corsair, and with an m.2 ssd. But when I try to turn on the computer there is no signal, the fans are spinning and the ram is shinning but there is no signal on the monitor, In fact the Error led light, first it was DRam, the I switch the ram then its cpu, then with the original ram both light up. The problem is, the motherboard only supports 3200mhz and my sticks are on 3600mhz. Please can someone help me
@@frezzyfn-6 did you solve the problem I have same problem that you mentioned.
You saved my pc this is the 2nd time it happened but, 1st time on my new motherboard I was gonna cry THANK YOU SO MUCH HONESTLY FROM THE BOTTOM OF MY HEART
THANK YOU SO MUCH, I thought I killed my pc and I just got it a week ago! After following all the steps it finally started to work, I’m very grateful
Did you mess with anything in settings I think that’s what I did but I have no clue I’m completely new to pc stuff
You just saved my ass and my computer. Thx for the help, and god bless you.
Thanks for showing this, the trick of shorting the JBAT1 jumper with a screwdriver fixed my problem of being unable to access the BIOS settings after I had removed one of the DIMMs.
Omg thought for sure I bricked my board with Live Update. This vid saved my ass. Many thanks my man!
If you're using msi, PLEASE don't use dragon center for update.
This really worked. It took a while for my pc to boot up but it did and that's all that matters. TYSM!
How much did it took to boot because i have waited about 2-4 minutes but it didn't boot at all
Is this solution for everyone who messed up with bios and wants to reset? I didn't mess up but i have the problem.
@@Mortatha_X76 around the same time. In the video
@@godshandftwfr I think so, since you're just removing all the stuff that you did in the BIOS
@@afterthought3109 thanks for telling me then..
Damn, got me back up and running. Didn't know what was wrong thought it was cables or my cpu. Thanks a bunch. Although why would this happen my mother board is only a few months old, so why would I need to do such a thing so soon?
OMFG THANK YOU SO MUCH. I bought my pc today. I paid like 1200$ for parts and I somehow fucked up xmp and my pc didnt post after that. I did this and now its working. Thank you bro
welcome
I’m praying this works , I overclocked my system . Everyone was fine then I tweaked the memory timing on the ram I’m praying this works like it did for others well see
Worked wow thank you so much bro I swear I was about to start crying I thought my rtx 3070 was broke after over clocking . This 100^ did the job ongg I was about to send it in and get it fixed and all that . THANK YOU GOD BLESS YOU GOT A NEW SUBSCRIBER
@@jayjjay3235 hey bro I have similar issue I overclocked my cpu due to my gpu being too demanding for cpu I have I overclocked it and did proccess I’m now waiting 10 mins now with battery removed I don’t get no display and my intake fan stays in turn on mode normally changes to on but please tell me this works I’m so annoyed only had built pc 4 months ago
@@DignityCFW ya it works bro i was bout to cry lmao, not really good with computers so i didnt wanna take the thing about but 100% glad i did . , just took the battery out for about 2 mins, put it back in and it worked. I actually messed with overclock again and screwed it up , tried the method and can tell you this method works 100% . Thought it was my RTX3070 at first cause no display but ya it was the RAM and taking battery out like video shows 100% works. good luck bro i know how u feel lol
@@jayjjay3235 I built a pc for my 9 year old brother who just plays minecraft and wants mod so i got him a i5 with a 1030 and when I try to get in the bios it shows a error with the battery it says it was changed or something, am not worried about the cost just dont want my lil bro to cry
This 100% worked, I was trying to swap a CPU and it would only result in a black screen. Did this process.. worked first time!
I love you man, I don't usually reply on things that helped me but this scared me thanks
thanks that worked for me. You're a live saver. . Greatly appreciated.
Thank you so much man! I was messing around in the bios...decided to underclock my chipset and my pc wouldn't boot afterwards. I wasn't scared tho...i knew i needed to clear the bios but i didn't know how to do that. This vid helped me out a lot...now no matter what settings i change it can easily be reversed if things become unstable and i can't boot. Thanks a lot! I owe you one
dose it delete anything from my pc??
@@putin9128no
Please help me also brother
I followed the steps but didn't work 😭
Got This in my Recommendation and you saved my Life Thank you so much and youtube of course ❤️
Just to confirm I'm doing this right :
Power down pc - Remove power cords
Short Jbat1
Remove battery
Insert battery after 2 - 3 minutes
Add cover
Power back up
Sorry if this seems dumb I done a Msi bios update and I'm getting a black screen. It's killing me here 😂
Thank you so much i love you i thought my PC was long gone but you really helped me
Bruh i freaked the fucked outta me.... thought i broked my motherboard somehow...but after watching this video it's fixed!!!
Thank you very much, I had a spare reset switch lying around and it did the trick!
Thank you so much. I thought broke my pc on my first build. You saved my ass.
Hlo
What happened to your pc
Thx man this fixed my fans staying in after shutdown
बहुत-बहुत dhanyvad sir ...main bahut pareshan tha thank u
Thanks you so much this worked for me i had changed some ram settings and it ruined some stuf but this 100% works
Tnx u so much vaiya ... My system is fixed... ❤❤❤❤...
Tnx u so much brother
broo u really helpfull 😭 thank u my pc boot up now . i appreciate it .
Thanks bro saved me 😭😭❤️❤️
The battery Trick always works haha thanks so much i messed up with some new Ram and everything went black I was having heart attacks, panic attacks and nervous breakdowns until now
Thank you so much! This helps me a lot!
I love you so much you don’t even go understand
Why are u gay 🤣🤣
Thank you it worked🥺🥺🥺❤I was scared
1000 times THANK YOU!!! I WISH YOU ALL THE BEST IN YOUR LIFE
THANK YOU SO MUCH!!! I dont know specifically what I did but with your help I understood what I did wrong and fixed it
Please tell me is it applicable to complaint of no display and fan running
Thankyou so much sir. It's work. 😍 my PC in trouble because I trying to set PC to dual monitor, and that's what i get my PC is stuck on BIOS. Grateful to you 😍
You save my life and PC bro, thank you!
Thank you so much!!!
You saved my Day!
I will leave a Sub!!!
Thank you!
OMG!
Thank You!
I can't thank you enough for this, great job man!!
Thank you very much my friend, I really appreciate your video. Again thank you!!!!
THANK YOU VERY MUCH!! I overclick my ram too much and my pc didnt turnd on anymore, this fixed it!! Thank you
Thank you so much.!! This worked great!!
Bhai kya baaat hai maine galti sebapni ram 3200mhz pe kardi thi
Bhai thank u so much bro so much thanks bro u r amazing
I appreciate it man thanks alot 👍👍👍
Bro you are such a saviour
I messed up with my PC's BIOS settings, now my system shows blank screen. I had try this method of hard reset by removing CMOS battery and by Jumpers on motherboard. My Motherboard is working fine as CPU fan, Mouse, Keyboard is running.
But Nothing has worked i.e blank screen even after hard reset of BIOS.
Please help me to fix this.
I have the same issue, my pc restart every time it’s a loop, after I did a bios update, i broke my mainboard
hello my msi motherboard model z97 is with a blue led blinking which I found out to be debug mode. how to fix it? thanks
Hello guys,
I had a similar problem yesterday.
I set my rams to 3600mhz but in the wrong way at bios. I got no signal to my monitor.
Nothing helped even the bios reset.
The only solution was to take out the rams and put another ram stick. This helped my to get a signal and reach the bios. There you can change the settings and then you can put your previous rams back to the mainboard and everything should work.
Notice: This would help you if you did something with the ram settings.
Let me know if it works for you :)
Adzackly the same happend to me.
So I need to buy new ram ?
@@alf8449 you just need the new ram for a moment to set your settings from the bios back. Maybe you can take some from your colleague ...
What if I got problem like this : My PC running for like few hours but suddenly it become no signal and no sound, but the PC still running (the fan, LEDs inside the casing still on), is this the solution to do it?
@@flickmew99 Did you change something in the bios?
When do you have to unplug your power source? Before pinning jbat1 with a screwdriver or before getting out the battery? 🤔
I just builded my first pc ,and it’s working ,but I can’t use keyboard for the first bios turn on ,help me
You saved my life man ❤️
In other words, I had a Ram speed of 3000mhz, I changed it to this a long time ago because my Ram speed is 3000mhz, but after a long, long time, I tried to go to the bios again where I need to change the Ram speed, I went there and it shows a black screen, so I tried to remove the battery that is under gpu, and when I did that, my Ram speed reseted from 3000mhz to 2133mhz and I can't change it to 3000mhz anymore, because my bio shows a black screen and even if I am trying to clean "reset my computer" also shows a black screen but it should show how many percent-% it cleared.
If I do this will my ryzen 5 5600 still work does it reset bios updates?
I want to replace the cmos battery with a new one WITHOUT changing the bios settings. I did a google search that settings will not be reset if a new battery is replaced before 1-5 minutes... Is this actually true??? Are there any other things that I have to do before replacing the battery? (like holding the power button for 10 seconds or touching pc case to remove static)
An answer will be greatly appreciated :)
Thanks for this video. I tried to update bios via msi dragon center (i know, worse idea ever,i learned the hard way) no picture display afterwards. Reset by jumping the pin, it works now!
P/s: I'm uninstalling msi dragon center as i typed this comment. Lol
you helped me so much. thank you good sir
Bhai I love your Desi accent, I'm from NYC - sincerely appreciate your support! :-)
Thanks a ton
You literally saved my ass. Thank you!
Thank you very much bro 😊❤️ you save my 🧬 life first I do it it didn't work but second time it worked really well 😃
Thank you, come again...
lmaoo
Bhai yadi motherboad ka bios update kiya ho wo b reset ho skta hai kya
I have tried everything to reset my Bios nothing is working i messed with settings in my bios and now no display not keyboard but my mouse LED RGB lights come on i dont get why nothing is working with this board its the Gigabyte B450m DS3H Wifi mobo with a ryzen 7 2700x i dont have another CPU with Integrated graphics to test the onboard graphics to switch everything back sadly, i just have no idea what to do
Thank you so much sir, you are a the computer whisperer. You saved my life, thank you thank you thank you
I save my gaming PC with these. Many thankz
Thank you so much I was getting frustrated about my gaming pc
it will work on my mobo MSI A320M PRO VD/S after i update the bios into the latest version?i experience no booting after the latest update which shows 100% success...please help me bro
same problem
Wow i can t believe this tutorial has worked PERFECTLY thx indian Love India so much thanks bro i appreciate
Ty, this helped me a lot
Man, you're the best! Thank you!
HELP PLEASE.
My pc is turning on but no display and I unplugged my pc i took off the cmos battery and I put it back agian for about 5min and my pc didn't turn on.
Did your screen have a white little line on the screen in the middle left part? Cuz mine does. It stays black with that little line (btw the line is not blinking) and after about a minute it just goes to plan black with no line on it. the keyboard turns on but the mouse doesn’t. Do you know what to do?
I have the sams problem, did you manage to fix it?
i thought i was going to have to buy a new cpu, this worked though. THANK YOU!
No doubts that you are my life saver. Thanks bro🙏🏻
Why are you using dish cleaning gloves while poke your mother board with a large screwdriver. LoL
THANK YOU SO MUCH THIS HELPED ALOT I WILL SUBSCRIBE RIGGT NOW
Thank you very much bro😊
My mobo msi b460m mortar bricked while using mflash from bios inside to update bios version
I tried all methods like shorting pins, removing battery nothing worked
Please help...
Same issue here 😢
tq very much for making this kind of video its help a lot
Screwdriver when you touched in jbat 1 then power on or off that time?
Damn your finger nails are huge
Why use gaunlets? is it dangerous if I dont use them?
Thank You 👍🙏
Brother thanks a lot you saved me from buying a new mb! Thank u so so much
Thank You so so much. I tried to overclock ram and I pressed f1 or delete but nothing happened, I panicked and pressed the power button. I did your solution and my pc is working again. I thought I destroyed my pc and I was so worried. Thank You
Did u have to pull out mother board ?
@@langman194 No I did not and you do not have to. Instead of the paperclip I used a push pin. Have a great day
@@timothyly2934 thank you
@@langman194 You are welcome
Did you remove the jumper first and then remove the cmos battery or is it the same?
anything you can
In my case didn't need to use the jumpe/short JBAT1. Took the battery out after unplugging everything (all USBs/cables removed). Then I pressed the power button a few times. Then put everything back and the hdmi display was back. Worked just fine🙏
Bro I enabled secure boot when I saved and exited the bios it is not working
Just black screen
Please help me bro
I tried removing cmos battery
How do you take the gpu out and how do you cep your self grounded with out a anti static wrist strap
Thank you soooo much man❤️...it helped a lot ❤️
I’ve troubleshot everything I can think of, went back and checked all connections, reseated the ram, pulled the battery etc. my fans kick on and everything powers up, yet I still get no feed to the monitor… I’m starting to suspect a dead motherboard but if the motherboards dead wouldn’t all that be affected?? Everything’s brand new. Any input would be appreciated. I’m dead in the water right now
try the method shown in video, if not fixed maybe processor or motherboard deAD
@@SomTips yea I tried everything in the video and then some. Have a tech buddy coming to look at it in a few days and hopefully he will have an answer for me. Tho I suspect he’s just gonna tell me the motherboard was dead on arrival. I’ll see if he can test the processor to further isolate but idk if he has a rig that’s compatible with a 9th gen I9(bought before I knew the performance of the cpu doesn’t really matter lol)
Just curious could an older monitor possibly be the culprit?? I’ve tried on two separate ones but they are both older ones I had laying around (they are actually small TVs with rgb and hdmi ports) tried both ports and nothing on either one. Plugged in the xbox and both hdmi ports work.
@@lilbopeep6059 did you fix it because the same thing is happening to me
Did u fix it ? I’m having the same issue and I’m thinking the bios on the motherboard needs to be updated to be able to communicate with the cpu
I’m having the same issue with this pc I just built. Everything’s turning on and the rgb works but I’m getting no display on the monitor and I can’t get the bios to pull up. The keyboard doesn’t light up so I tried another keyboard and that one only lights up for the first second. Did you guys ever get it fixed? I’m watching this video now none other were helping me
Thanks bro
Great brother for tutorial. Say thanks From Indonesia 🇮🇩🙏
I'm facing this issue for my msi laptop gt72s 2015 model.
Not able to access bios settings, after switching on the laptop just blank screen is there nothing else.
thank you for your help my new pc can now run!!
Underrated channel in History ❤🔥
Wow this reallllly saved my bacon thank u so much!
So do I plug it in to short circuit it then plug out when I take battery?
Yay! It worked! Thank you so much!
Very helpful video. If I can make a suggestion though, I think you should add captions to your videos if you want to target English speakers. Your native accent is very thick and you speak fast which makes it hard for your audience to understand what you're saying sometimes. Other than that, thanks for the tips! I thought I was going to have to replace my motherboard! Lol.
Thanks dude SOOO MUCH!!!
Thanks a lot !!! U saved me !!!!