SpeedyBee F405 V4 - Has everything you want in an FPV stack!
Vložit
- čas přidán 25. 09. 2023
- For a budget stack the SpeedyBee F405 V4 has more features packed into it than would be expected. This might be the best budget FPV stack of 2023!
You can find the SpeedyBee F405 V4 stack here: www.speedybee.com/speedybee-f...
My Long Range FPV frame designs:
-Falcon RPM 7.5" Cinematic / Long Range @ AddictiveRC - bit.ly/Falcon_RPM_AddictiveRC
-Falcon RPM 7.5" Cinematic / Long Range @ CNCDrones - bit.ly/FalconRPM
- RAD Li-ion 7" Long Range - bit.ly/3MFoCdg
- RAD Scout 7" Xtra Long Range - bit.ly/3kyvPDy
- AOS Falcon 7 Cinematic Long Range - bit.ly/3jUiLUI
Parts list and affiliate links for 6s long range build - (great reliability and balance between power and efficiency)
T-Motor F7 Pro flight controller - bit.ly/3xtW1mE
T-Motor F55 Pro II ESC (4in1) - bit.ly/3uITNOF
Motors for 7" props: T Motor F90 2806.5 1300kv - bit.ly/3M4fjDg
Motors for 7.5" props: T-Motor Velox 3008 1500kv - bit.ly/3QJ8Gcf
Camera Butter ND Filters - bit.ly/3WZmSQR
7" props for RAD Scout - Gemfan 7035 (tri-blade) - bit.ly/3vdSzKu
7" props for RAD Li-ion - Gemfan 7037 (tri-blade) - bit.ly/3rvCz5f
7" props for Falcon 7 - Gemfan 7040 (tri-blades) - bit.ly/3YaxFrZ
7.5" props for Falcon RPM Gemfan 7535 (tri-blades) - bit.ly/3vdSzKu
VTX antenna TrueRC Singularity - bit.ly/3xvXFEg
VTX - bit.ly/3JHWW5l
Receiver - bit.ly/3xuMGv8
FPV camera (analog) - bit.ly/3JL88OT
GPS - bit.ly/3uJjRci
Receiver antenna - bit.ly/3jG7o2L
Consider supporting the channel on Patreon:
www.patreon.com/user?u=48131636
Check out my frame design page @ CNCDrones: bit.ly/3vvRrD7
Use this link for the purchase of anything from GetFPV with no extra cost to you, but it helps the channel out: bit.ly/3roKZui
Excellent in depth review, very helpful thank you.👍👍👍
My pleasure!
Nice! Thanks for making the video!
Awesome review, dude! 😃
It's really impressive what SpeedyBee is doing... They're killing it!
Anyway, stay safe there with your family! 🖖😊
Thank so much! keep well.
Great review! Thanks for taking the time and being very thorough. 🤙🏾
No problem 👍
Wow great in depth review. Details many others dont cover! Too bad the heatsync cant be removed for not just conformal coasting but also for smaller builds that wont be drawing near the max amperage.
Ottimo è non costa una cifra astronomica ❤
I am pretty new to FPV I have just been flying box-built drones for a long time I am building a 10" for semi-long range but trying to do it on a budget just to get started so would this work OK for me? Or should I run 8S? I only have a frame and a Radiomaster Boxer right now so I am pretty green at this and there is so much info out there it is overwhelming. Thanks for all your info, I enjoy the channel and am learning slowly.
A 10" is big enough that people start having discussion's about using a 4in1 or single esc's. It'll depend a bit on the motor size, kv and prop choice. If you are going with lower kv motors and not anything too powerful it might be able to stand up to it. But generally for a 10 inch you're going to want to step up the parts quality and get a really good esc because 10" props take some BIG motors to spin properly. 8s would be good for 10" but it'll also be more expensive as well. It should be ok with 6s if you're on a budget. Just make sure your getting the right kv of motor.
@@FalconRadFPV Awesome thank you for the feedback, I just needed someone to tell me to dive in head first and go down the rabbit hole as I do with every hobby haha, so what ESC should I step up to? What is a few hundred extra bucks? lol I know I am going to go nuts anyway I was trying to make myself think I wasn't
😮 it's expensive at these times for 405.. remember these were sold for 25-30$ and no one buy them because of 722 hype.
Yeap, I miss 2019 as well...
You mentioned to load BLuejay onto this ESC. I know Bluejay 0.20.0 has a problem so it is still safe to put 0.19.2 on it?
Sorry not sure, I've never used Bluejay firmware before. But I would think using the previous version should work. A lot of my gear is still one or two firmware versions behind the most recent. I like to make sure the bugs have all been found before switching to a firmware.
@@FalconRadFPV OK so you just leave it as Blheli_S?
Do you know how to utilize the 8 motor setup? I only see 4 motor mounts
on the reverse side from the esc plug there are solder points for M5, M6, M7 and M8 those are for the other four motors. Four are connected through the plug to one ESC and the other four solder points (motors 5 to 8) connect to a second ESC along with the ESC telemetry and a ground. There is a dotted line box drawn on the FC around this section.
Is it worth it? Seems like everyone's doing f7. Is this just for budget. Is the f7 drastically better
Bl heli 32 firmware is a bit better, but as for f4 or f7 on the FC it just means you can't run 8k dshot600 with rpm filter, but 4k dshot600 with rpm filter is just fine. But ya I do prefer a blheli32 ESC over a blheli S ESC with bluejay firmware. That said, if you're going to just bang up a freestyle basher then a budget stack sounds good to me as long as the ESC holds out.
F405 not sure why we are still venturing them nice review though man. I found the speedy bee app never updates fast enough also to keep current changes on the bleeding edge. Config issue and unwanted changes to config when using to newer release
because it has a lot of flash and a lot of uarts is why we are still venturing them