This is Brilliant on the TR6 motor. CGI made this engine look fabulous. Granted this engine is dated but in the hearts of people who got to drive the TR6 this engine holds a place of respect and in some cases reverence. Excellent video of this iconic British sports car engine.
Excellent video. I've had over 245 cars. Three of them were TR6s. A 73, 75, and 76. My favorite was a 75, Konis in the front, three quarter valves in the rear, 205/70/15. Sold for $19,950. The biggest mistake was putting a small block 350 in a TR6. Destroys the balance of the car, making it inelegant. I always wanted a PIE and a cross flow cylinder head.
I owned one for several years,what a terrific car.God if only these were made these days,perhaps with a few modifications,they would sell like hotcakes.
Beyond brilliant . Has the correct green HT leads and misunderstood Lucas PI. Hope one day my 1971 machine will be dragged out of the shed and fettled to run on more than 5 cylinders!
I owned one for 12 years, complete restoration in '84. Maybe not the best handling sports car but it ticked a lot of boxes for me. Children stopped play I'm afraid..
I can’t imagine how you were able to do this. Very impressive. I had a TR4A with a similar 4 cylinder engine. They are big heavy engines. Lovely to get an ‘inside’ view.
Similar but not related. The TR4A engine was the same as earlier TRs, a development of the 4 cylinder Ferguson petrol tractor engine; the TR6 used a stroked version of the later 6-cylinder Vanguard engine.
This gave me a scare because the big end caps are facing away from the camshaft. I'm rebuilding a TR6 engine and thought, have I got them the wrong way around!? No, but you have🧐
I was wondering what the piece was front of the distributor. Wasn’t until the fuel lines went to the intake did I realize it was fuel injection. Great animation.
Did the MK1 2.5Pi have the same motor as the TR6? We had a brand new one in 1969 and never had any fuel problems with it. She went like a rocket. Lovely car, lovely note.
Excellent. I have had a TR6 since 1982. Curious why this CGI animation was made as it was expensive, brilliantly done but Why? Part of a bigger programme perhaps?
At 3:57 How did you get the engine apart without tearing that timing cover gasket, I always shred mine. :) VERY COOL AND well done animation. But why was the effort put into this? College paper? GREAT JOB!!!
Hello. Brilliant animation and models - Any chance that I could buy the models of each part please, to save me the work of creating my own. Thanks either way. TR6 owner with engine overhaul underway and Solidworks user.
I call Bullshit.9.5 compression? Naw, best I found in the 5 I've played with is 7.8,maybe.Out of those 5,0 were 6 bbl's.But that was the 80's.Now,I put 170 h.p. ford 200's in MG's with a t5.
This is Brilliant on the TR6 motor. CGI made this engine look fabulous. Granted this engine is dated but in the hearts of people who got to drive the TR6 this engine holds a place of respect and in some cases reverence. Excellent video of this iconic British sports car engine.
awesome animation
As an engineer from the 60's I applaud you. As an animator from the 80's I applaud you.
Excellent video. I've had over 245 cars. Three of them were TR6s.
A 73, 75, and 76. My favorite was a 75, Konis in the front, three quarter valves in the rear, 205/70/15.
Sold for $19,950. The biggest mistake was putting a small block 350 in a TR6. Destroys the balance of the car, making it inelegant.
I always wanted a PIE and a cross flow cylinder head.
The sweetest sounding violin isn't the loudest
As a Triumph 'guy' - awesome! Many thanks for producing this :)
This was amazing. Love being able to see how everything functions. It's a great tool for education purposes too. Thank you for sharing!
This is amazing! I can't believe it still doesn't have millions of views.
Absolutely fantastic!! Thanks so much for putting this together. I am about to rebuild my TR6 engine and this will come in handy.
Really impressive piece of work and thanks you for it!
Excellent!
This is beautiful! Thank you so much for making this!
Absolutely stunning video - very well done to all involved! :)
They forgot the oil leak.
Watched it twice and no oil went in...no leaks then!
LOL!
Reminds me why the British stopped making computers. They couldn’t find a way to make one leak oil.
@@rednip60 no leaking, marking their/her territory..
I owned one for several years,what a terrific car.God if only these were made these days,perhaps with a few modifications,they would sell like hotcakes.
What a crude, old-fashioned little beastie it is. Interesting video.
Thanks
they are the best video makers
Beyond brilliant . Has the correct green HT leads and misunderstood Lucas PI. Hope one day my 1971 machine will be dragged out of the shed and fettled to run on more than 5 cylinders!
Astrein, das war fantastisch.
Fantastic.
Very clever! Thank you for sharing,
I owned one for 12 years, complete restoration in '84. Maybe not the best handling sports car but it ticked a lot of boxes for me. Children stopped play I'm afraid..
Sensationelle Animation, wollte sowas schon immer mal sehen und bin eben durch Zufall draufgestossen. verstehe meinen TR6 jetzt etwas besser :o)
I can’t imagine how you were able to do this. Very impressive. I had a TR4A with a similar 4 cylinder engine. They are big heavy engines. Lovely to get an ‘inside’ view.
Similar but not related. The TR4A engine was the same as earlier TRs, a development of the 4 cylinder Ferguson petrol tractor engine; the TR6 used a stroked version of the later 6-cylinder Vanguard engine.
very interesting engine animation especially for a rare engine
Sehr, sehr lässig!!!
Danke!!! :-)
Brilliant!!!! Chapeau, Arthur!!!
Thanks for posting a really neat video
absolutely stunning
Super gemacht. Thumbs up !
This gave me a scare because the big end caps are facing away from the camshaft. I'm rebuilding a TR6 engine and thought, have I got them the wrong way around!? No, but you have🧐
Excellent! Bravo!
Cool
Best thing on you tube
Wonderful I love it. Next job the rest of the car!
Powerful, thanx!
Brilliant - bit cleaner than my engine!!
Respect!
bravo! excellent work
I had a 69 GT MKII and 70 TR6 and now drive 2000 JEEP 4.0 ... I guess I really like those pushrod inline 6s.
this seems to be a very simple engine but the animation is nicely detailed
I was wondering what the piece was front of the distributor. Wasn’t until the fuel lines went to the intake did I realize it was fuel injection. Great animation.
Thanks! KC Triumph Sports Car Club .... Fine assembly of engine , plus the animation.....
(421 Likes to 11 that could not enjoy it ...) Losers lose ..
harika bir animasyon hayran kaldım..
Superb animation, very useful to this TR6 owner - many thanks ! ... and maybe then the gearbox ? ;-)
Did the MK1 2.5Pi have the same motor as the TR6? We had a brand new one in 1969 and never had any fuel problems with it. She went like a rocket. Lovely car, lovely note.
Yes, more or less the same engine Richard. Very rare car now, less than six mk1 pi’s in existence
Amazing!
Truly awesome to watch and learn from.....Can you do this with the Chrysler Slant 6 please!!
50K hits. Not bad
Amazing work. Did you model all the parts yourself? Must've taken ages!
Excellent. I have had a TR6 since 1982. Curious why this CGI animation was made as it was expensive, brilliantly done but Why? Part of a bigger programme perhaps?
Very nice! Too bad they're going to have problems with it soon. They forgot the thrust washers!
the 6 never had PI either! the TR5 yes.
@ptegler100; Dead wrong, of course it did. The USA model only had carbs, though.
Itll overheat first due to no water 😉
Had a Stag years ago with no engine problems but a lazy auto gearbox.Hard and soft top modeled on Mercedes design but manual and took ages to erect.
I need this for a TR4!!
even hear the loud TR lifter noise. Nice. would love to know what programs were used to make this?
Is the CAD drawing of the block and crank available for purchase?
At 3:57 How did you get the engine apart without tearing that timing cover gasket, I always shred mine. :)
VERY COOL AND well done animation. But why was the effort put into this? College paper? GREAT JOB!!!
amazing! 5*
Hello. Brilliant animation thanks. Is it possible to buy the models used in this animation please?
Hello. Brilliant animation and models - Any chance that I could buy the models of each part please, to save me the work of creating my own. Thanks either way. TR6 owner with engine overhaul underway and Solidworks user.
Sadly from 2030 on all combustion cars are forbidden in entire Europe.
Is this model available for SketchUp etc
Great even down to the correct vile green HT leads, but would prefer more revving noises instead of irritating music.
at 0:21 they specify its a overhead cam, while you can clearly see the rockets and tappets
They do not. it says OHV not OHC.
Oil?
No wonder TR6's had so many issues - there's no cam drive!!
D'ooh!! Not OHC.
I call Bullshit.9.5 compression? Naw, best I found in the 5 I've played with is 7.8,maybe.Out of those 5,0 were 6 bbl's.But that was the 80's.Now,I put 170 h.p. ford 200's in MG's with a t5.