EXCAVATOR ROTARY MANIFOLD REMOVAL MADE EASY | CAT 320D FM | part 2

EXCAVATOR ROTARY MANIFOLD REMOVAL IN DETAILS | CATERPILLAR 320D FM
#caterpillar #excavator #forestryequipment
Diagnostics video: EXCAVATOR LOSING HYDRAULIC FLUID BUT NO ANY VISIBLE LEAKS? EASY DIAG | CAT 320D FM | part1
• EXCAVATOR LOSING HYDRA...
EXCAVATOR SWING MOTOR INVISIBLE HYDRAULIC OIL LEAK | JOHN DEERE 2054D
• EXCAVATOR SWING MOTOR ...
Join this channel to get access to perks:
/ @pistonshack
HEAVY EQUIPMENT BAY Playlist:
• HEAVY EQUIPMENT BAY
More John Deere repair videos:
NO REMOVING or SPLITTING TRACK EXCAVATOR FINAL DRIVE SPROCKET REPLACEMENT TIPS | JOHN DEERE 2154 • NO REMOVING or SPLITTI...
FINAL DRIVE GEAR OIL CHANGE: check, level, orientation, drain, change, intervals / JOHN DEERE 2154d • FINAL DRIVE GEAR OIL C...
JOHN DEERE DIESEL LOSES POWER UNDER LOAD | Most Common Cause of FUEL STARVATION ISSUE
• JOHN DEERE DIESEL LOSE...
ENGINE OIL LEVEL TOO HIGH? JOHN DEERE 6.8L 4.5L ENGINE OIL GETS DILUTED WITH FUEL | Fixed.
• ENGINE OIL LEVEL TOO H...
JOHN DEERE LONG CRANK ISSUE AFTER SITTING | EASY TO FIX | John Deere 2054d
• JOHN DEERE LONG CRANK ...
JOHN DEERE 2130 FUEL LIFT PUMP REPLACEMENT
• JOHN DEERE 2130 FUEL L...
ENGINE OIL LEVEL TOO HIGH? JOHN DEERE 6.8L 4.5L ENGINE OIL GETS DILUTED WITH FUEL | Fixed.
• ENGINE OIL LEVEL TOO H...
JOHN DEERE PENCIL FUEL INJECTORS REPLACEMENT Made Easy | John Deere 4.5L 6.8L POWERTECH
• JOHN DEERE PENCIL FUEL...
JOHN DEERE FUEL LIFT PUMP REPLACEMENT | JOHN DEERE POWERTECH 6.8L 4.5L
• JOHN DEERE FUEL LIFT P...
TREE STUMP VS EXCAVATOR or HOW TO REMOVE STUBBORN STUMP | John Deere 2054d
• TREE STUMP VS EXCAVATO...
TRACTOR IGNITION KEY SWITCH WIRING | Universal Ignition Switch | JOHN DEERE 2130
• TRACTOR IGNITION KEY S...
SERPENTINE BELT REPLACEMENT | JOHN DEERE 2054d
• SERPENTINE BELT REPLAC...
FAN DRIVE PULLEY REPLACEMENT JOHN DEERE 2054d
• FAN DRIVE PULLEY REPLA...
DISCLAIMER:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results.
Due to factors beyond the control of PISTONSHACK, it cannot guarantee against unauthorized modifications of this information or improper use of this information. PISTONSHACK assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. PISTONSHACK recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of PISTONSHACK, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not PISTONSHACK.

[@mikea3766]

cleanest excavator I’ve ever seen.

[@PistonShack]

Thanks, Mike!

[@PistonShack]

Tried to keep it clean. This machine is pretty old. She is getting up to 15k hours, when things starting to break.

[@rverro8478]

Regardless of the season, it's either you get bitten by the cold OR, bitten by mosquitoes.
Nice work and, thank you for sharing.

[@PistonShack]

Very true!

[@oby-1607]

Worst part of this job is the hanging upside down and the cold. These require patience and a calm attitude to complete. Good work.

[@PistonShack]

Oh, thanks buddy!

[@SpoonerTuner]

Very helpful video. My HITACHI UH07-LC is leaking from this rotary manifold. I have not looked under there yet but hopefully, I can also access the bottom section from underneath without having to separate the track undercarriage from the upper house.

[@user-xx3hm5oh4o]

Nice work 🎉 such an amazing job.
Greetings from Brasil

[@PistonShack]

Thanks Diego! Wasn't ton of fun for sure)
Greetings from Canada!

[@jayasankar1620]

Very useful video

[@PistonShack]

Glad you liked it