Soap Making - Wood Grain Soap Line Pour Technique 2 | Soap Studio

细木纹渲染皂
This video shows how to make soap using kek lapis swirl & small wood grain swirl technique.
Tools & Materials:
Scale, Thermometer, Immersion Blender, Containers for Measuring & Mixing Lye, Containers for Mixing the Soap Batter, Heavy Duty Plastic or Silicone Spoons & Spatulas, Gloves & Goggles, Soap Molds (You can replace it by using empty milk box), Plastic Spoon, Easy Pour Containers, Whisk.
Materials: NaOH (Lye), Coconut Oil, Palm Oil, Soybean Ice Cube.
Included below are ingredients of the recipe so you can make it for yourself.
Final Product: 500g of Soapbar.
Coconut Oil: 300g
Palm Oil: 100g
NaOH: 71.1g
Soyben Ice Cube: 143g
Cinnamon Powder & Bamboo Charcoal Powder.
Essential Oil: Lavender.
Caution:
ALWAYS PROTECT YOUR SKIN AND EYES WHEN MAKING SOAP.
1) It is recommended to use ice cube to cold down the temperature of liquid, to prevent overheat when mix the soybean and RO water with Lye.
2) It is a must to wear hand glove to prevent skin burning cause by NaOH.
3) Wear goggle to protect your eyes.
STEPS:
1) Measure each types of oil according to the formula, stir evenly and put aside, if you would like to change types of oil and weight, make sure you recalculate the formula.
2) Measure the weight of ice cube and put aside.
3) Measure suitable amount of NaOH according to the formula and put aside.
4) Let i = oil, j = ice cube, k=NaOH
Prepare 3 stainless steel containers, put in i, j, k according to the formula.
5) Dissolve Sodium Hydroxide. Pour item k into item j, little by little do not pour the whole cup by once to prevent overheating. NaOH is corrosive, must wear hand glove and eye goggle. Do not pour water into Lye.
6) Stir evenly until j is melted, measure temperature of i and j.
While temperature of i & temperature of j less than = 30'C and Temperature interval less than= 10, mix i with j.
Use a strainer to prevent unmelt solid Sodium Hydroxide from falling into oil.
7) Stir evenly until light trace, you can utilize a stick blender to enhance the emulsification process.
8) Pour the soap into mold and store into a polystyrene box for better temperature control, wait for 24 hours before unmold and soap cutting.
9) After 24 hours, unmold and cut the soap, store in a cold and dry place for 45 days evaporation of water before using.
Thank you for watching.
Facebook: Organic Utopia
Instagram: organicutopia
Shopee: Organic Utopia

[@SoapStudios]

Wood Grain Soap Line Pour Techniques.

[@minghuihow5107]

谢谢分享这款木纹渲染的手工皂，很美。

[@SoapStudios]

You are welcome.