Customizing Traxxas Trx4M Ford Bronco 
Vložit
- čas přidán 7. 09. 2024
- #traxxastrx4mbronco #trx4mbronco #djcrawler #rccar #customtrx4mbronco
hello everyone 👊😉
welcome back to the garage, today we are going to be installing, some accessories to the Traxxas trx4m Ford bronco.
I thought it was time, to freshen up the look, and try out some of these accessories I keep seeing on AliExpress.
I was quite happy with the quality and finish off from all these products.
there are still a few more things I want to do to customize the look on the Bronco, but that of course will have to be for another video.
we will be looking in detail at these custom parts and of course how to install them.
they will also be a running video at the end, just so we can see how it looks out on the trail.
If you will think I did a good job with this video and you like the content, please don't forget to like, comment and subscribe if you haven't! And if you don't want to miss any of the latest content, smash that Bell!
thank you 🤜🤛
All the parts used in this video will be linked below 👇
Bronco logo stickers
Just found this amazing item on AliExpress. Check it out!
2,16€ 66%OFF | Metal Three-dimensional Logo Stainless Steel Metal Side Sticker For 1/18 Traxxas Trx-4m Bronco Trx4m
a.aliexpress.c...
Side Steps
Just found this amazing item on AliExpress. Check it out!
2,83€ 50%OFF | TRX4M Side Pedal Metal Non-slip Decorative Sheet for 1/18 RC Crawler Traxxas TRX-4M Bronco Land Rover Defender GRC Upgrade Parts
a.aliexpress.c...
hood panels, back window grilles, side plates ect
Just found this amazing item on AliExpress. Check it out!
1,79€ | Rear View Mirror Bumper Fender Lampshade Exhaust Pipe Chassis Window Net For Traxxas Trx4m 1/18 Trx4m Bronco Rc Car Upgrade Part
a.aliexpress.c...
Hello Ryan 👋
Thank you so much, for all the work you go throug, making these videos.
One again you have done, an amazing job with this one 👍
Your bronco is looking super cool!
Can't wait for the defender customizing video 😜
Keep up the great work 😁🤙🤙🤙
Hello Sophie, it is great to see you again.
Missed your awesome comments!
I really appreciate it, thank you so much, as comments like this is what keeps a person motivated to keep going.
Hope you have an amazing day, and would really like to see you again on the next video. 👊😉
Hello Ryan, at first I thought noooo those stickers look to cool but after you were done it looked so cool driving around your course I might put some on one of my Broncos, the window cages are a must , I'm ordering them for all my Broncos and extras for Broncos I don't have yet, thanks for all you do 🚙🚙
Hi bro 👋
Don't worry I didn't want to remove my stickers!! 😞
I felt exactly the same way, but once I started getting the accessories on, I was quite happy with the end product 🤪
I have found some more goodies but, I have spent my budget on a whole bunch of other parts to do some builds! So for now it's going to have to wait and I'll move on to the defender.
And hopefully next week I will be able to build the injora Cherokee Jeep 😉
That's awesome bro, I am really thinking about getting another Bronco. Wanted to see if I can't make it into a pickup!
But that's definitely for the future.
Thank you so much for all the support and for the awesome comment 🤜💥🤛
Wow those small bronco stickers actually made the truck seem so much more realistic! Most cars do actually have some lettering there you placed them too, great job man!🤩
Thanks bro, normally I always remove logos from my real cars, but in this situation I actually think, it finished off the look I'm going for.
There are definitely still a few things I want to find, to finish it off.
I really appreciate you watching and commenting 🤜💥🤛
So glad I got the V2 of the Injora bumpers for my Bronco, the body sits as it should now!
I think I'm going to have to give that set a try, I am never happy with the way the body sits with these bumpers.
Thanks for the info 🤜💥🤛
@@rcfungames no problem.
Nice technique with heating the needle.
Thanks buddy, normally I stick it in the end of my soldering machine, to heat it up, but you know how it is! when you need something you can never find it!! 😅
I really appreciate the visit and comment bro 🤜🤛
She's looking good thanks 🫡
Thank you bro!! and thank you for watching and commenting
🤜💥🤛
That is such a cool little bronco💯
Thank you Don, I really appreciate it bro 🤜💥🤛
Awesome! Always love your vids! I wasn't aware that dj crawler made those trim pieces for the Bronco, but they look really nice. Thanks for taking the time to show how to install them.
Hello Jonathan, and thank you so much bro!
It was my wife that put me onto AliExpress and she kept seeing all these accessories.
Anytime bro I'm the one that appreciates the watch time and the awesome comment!
I hope you have an amazing weekend bro 🤜💥🤛
Really really nice detail, buddy. Good job.👍
Hello brother 🤜🤛
Thank you so much, I am glad you liked the way it turned out to 👊😉
Another awesome video thanks for taking the time to make these videos they are really helpful
I really appreciate it Brett, thank you so much bro 🤜💥🤛
Just quick tip install that needle in you soldering iron great video as always
That's normally how I do it that's why I use sewing machine needles, but at the moment I am trying to reorganize my work area! And I can't find my soldering irons 😅😅
This is definitely an awesome tip for RC beginners out there
I really appreciate you watching bro and dropping an awesome informative comment 🤜💥🤛
love all you videos Ryan ! I'd say you have some of the best videos on the trx4m out there. keep it up buddy. just 1 question. i recently put on bigger tires 64mm diameter and am getting getting fender rubs... thinking of getting longer shocks to lift the body higher off the tires. do you have that issue? what size shocks are you running?
Hello buddy, and thank you so much for the awesome comment!
I really appreciate it bro!! 🤜💥🤛
Yeah I tried 64 mm tires on the Bronco and they were just a bit too big, even with a lift they just caught on the edges of the fender Wells.
The biggest tire I recommend if you want to keep this stock look is 62 mm
I used to run 59 mm trucks but with the Bronco and the defender it just generated too much body lean and torque twist.
So I went back to the 53mm shocks.
If you are still running the stock bumpers get rid of them and pick up a set of the metal ones from injora, it stopped a lot of my problems with the tires rubbing on the bumpers.
And if you want a bit of a lifted look go for the lcg carbon fiber chassis, you will see it will give you a bit of a lift and at the same time better articulation.
Hope that helps bro, anything else just let me know 👊😉
yes that damn torque twist! ... I trimmed my back bumper and that's done the trick at the back . bought the plastic GRC Racing front bumper and they are looking great with heaps of clearance with the tires. so the only thing that's rubbing now are the front fenders at full turn ... oh well.... .... thanks for the recommendations!! have a good one
I’m back with another question for the expert. Since adding the Injora wheel hex hub extenders to our stock axels we keep losing wheel nuts. What should we do?
Hi bro, no worries man.
It is very normal for this to happen with the hex extenders, normally I just use a bit of blue loctite, let it sit for a few hours before you go out and play.
You shouldn't have any trouble with them coming loose after that.
👊😉