LS Throttle Body- Drive by Wire vs Drive by Cable
Vložit
- čas přidán 27. 08. 2024
- There are several differences in setting up a drive by wire throttle body for an LS engine compared to a drive by cable throttle body. Al goes through the differences and what you need to know for your LS engine swap.
Drive by Cable Fuel Injection Systems: www.summitracin...
Drive by Wire Wiring Harness: www.summitracin...
Drive by Cable Wiring Harness: www.summitracin... - Auta a dopravní prostředky
Great tutorial. Informative dialogue and elocution, and no B.S. music, editing, or "special" effects. Love it! Nice job, Summit!!!
+Anonymous,
Thank you!
i think ill stick with my cable - driven throttle body, less electronics to break and malfunction
+Travis Orlando your absolutely right.. ive spent $1500 dollars at a dealer to fix my drive by wire.. they purposely installed this shit on cars in an attempt to make more money.. the throttle cable was by far better. it was extremely basic, reliable, quicker response, and maintenance free.. but yet they drop the cable and replace it with this electronic garbage.. its all about money.. these systems comes with a hosts of electronic, computer, sensor, problems.. at the end of the day you will spend thousands.. there goal is achieved!! i want to get a new car but all the car companies is taking advantage of this oppertunity to complicate there cars and make far more money. well i will be buying older cars then.. i sold my drive by shit car.. it costs to much to maintain
LOL! Do you still use a rotary phone and watch you VHS tapes on a B&W tv...old farts....
Are you still simple, ignorant and dumb? Does everyone still take advantage of you? Idiot!!
_lh3.googleusercontent.com/pNhCy4GeG-uiCy5Vf4Lngn0batTe1yBeafXyR5xSY6DQPocCDzHtvWj1yMne9D63hYNJ5FsoEQ_
Poor new fart....
have you driven a new bmw with drive by wire? My old Honda has better throttle response
What tuning would I have to have done to the PCM on my 03 vortec 5.3 to get the throttle response better
Interesting! Thank you! Is it me, or does this seem overly complicated when it didn’t really need to be done? Kind of like an automatic tailgate on a pick up. Was cable so bad? Is it so hard to open the tailgate by yourself?
For an engine swap drive by wire is cool because you don't have to route the cable, you just run a wire through your firewall.
@@olliewalker6406 "you don't have to route the cable, you just run a wire through your firewall"
@@UncleJoeHikes yeah I’m not really sure what I was trying to say there either.
I am planning to use my 700R4 with my LS conversion, because the transmission is beefed up and I am planning on a driver that I dont push. My question is do I have to switch to a drive by cable throttlebody in order to retaing the line pressure cable of the 700r4? Any manufacturer makes a throttlebody or a bracket for this application?
is it possible to un-calibrate a throttle body driven by cable when cleaning it? or it just happens on the driven by wire?
I have toyota corolla altis 1.8 facing problems during gear upshift rpm goes high i think its a rev hang issue plz guide me how to solve this issue?
Hi Elahi, We need a little more detail of the issue. Do the rpm's increase and stay like the clutch is slipping?
@@SummitRacing during gear upshift rpm just stay 1 second gradually down
Does anyone know the basics about what information the throttle pedal is sending to the ECU?
I’ll soon be building a truck with two LS engines and I’d like to use a single pedal.
Will it be as simple as branching the pedal wires off to connect to two separate ECUs?
How do you do it if you already have drive by wire and what to convert to drive by cable
I have a fly by wire 5.3 can I just change the throttle body instead of switching the computer and harness
Any luck? In the same situation
Can use a drive-by cable throttlebody on a drive-by wire computer
Does a harness come by itself for the pedal?
Where does the dbw harness tap into in the harness?
Hey the info I'm trying to find is how to hook a 700r4 TV system to a drive by cable LS engine
JRBodnar Wut
When I did the ls swap, how do I control the overdrive on the transmisión if I went with the oem computer n wire throttle?
Ls7 major issues drive by wire been triipin on since will change to druve by cable
I don't want a sales pitch, but am I better off using a LS1/4L60e stock 99 trans am computer with HP tuner or spending the extra and buying MSD Atomic EFI or Holley Terminator? Other options?
I need to know the the color code for LS swap to the throttle body to the gas pedal I'm having a hard time getting it to sink in
I have a question I have a 1997 Chevy Tahoe that had a factory 5.7 350 in it and I took that out along with the transmission and put in a 4L60E tranny that came with my 5.3 swap I have both wire harnesses but I don't feel like combining the two together so is there a wire harness that I can order that will hook up to everything through my dash and transmission and my new Pcm for the 5.3
How to get a tps signal to the fi tech go shift with a drive by wire with a 4l60e
What would i need to properly install if im installing a ls3 intake manifold with injectors and its drive by wire throttle body in my 03 silverado
i need a little help . my use lq4 is wire driven but my blown engine is cable driven .
should i just swap the throttles arroud ?
I have a drive by wire 5.3 I was wondering what if any draw backs would I have if I change to the tb by cable. Is that a tuning issue
Having trouble with 2000 trans am , engine lunges at idle. i was told to replace Eldebrock throttle body with a Nick Williams throttle body . Do you think this would help??
Iam doing a ls engine swap on a 96 s 10 with a from a factory f body 2000 with the stock t56 six speed can i use the stock shifter location in my s 10
I have changed my ecm now problem comes that throttle stuck on 94.9% means totally opened and not closing after ignition on .Car Chevy Captiva .The original working of throttle is the flywings of throttle is opened at 94.9% at off position and when I turn the key into ignition they need to close fully .But nothing happens like this .So please suggest me what i do
Drive by wire = nanny throttle.
Unless you tune your pedal. I’d just rather have a cable.
so whats better for a 5.3
If I’m swapping an 04 lq4 with harness in 2002 v6 Sierra do i need to get a different harness if I’m going to change intake and throttle body to cable driven?
Very informative video.
I have a slightly modified 4.8 in my Sierra (cam, electric water pump, headers, electric fans, tune) but I can’t find any larger throttle bodies that will fit my intake. How could I go to a Drive by Cable set up? I haven’t found much useful information on forums
Is the “drive by cable” compatible for a 2010 SS Camaro ?
Great question
what do I do if I am using an engine that was connected to a automatic, but is going to be used with a manual transmission.
Please hellp if I had my computer program to fly by wire can I still use that computer if I switch wire harness and run a cable
Can i change the electric driveby wire for the wire throttle body ? The 02 tahoe where i got the swap has electric throttle and my 98 obs has wire am gonna do the swap but I didn’t check that until.. what can i do can someone help me out am new at this
Where can I find the harness for the drive by wire throttle body?
Will this work for a lq4 6.0 4l80 dbw
If going drive by wire, will using a stock 6.0 harness from a truck having the auto stuff not plugged while mated with a 5 speed manual work?
Yes. It will be fine. There is a table in the tune to select manual and turn off the inputs, but the ECM won’t really care. It may throw a check engine light, but kill the codes and you’re good.
I have 2000 Camaro ls1 can I switch to the instant torque cable with out tuning can I just plug and play??
#PleaseRespond
Drive by cable so much better screw drive by wire! I've spent over $1,500 trying to get my shit figured out! Way too finicky on boosted cars!
Can you change a drive by wire throttle body over to a drive-by cable throttle body? I have a 4.8 LS out of a 2004 Silverado that's drive by wire and I would like to change it to a driver
I have a 4.8 LS out of a 2004 Silverado that's a drive by wire throttle body I would like to change it to a drive-by cable throttle body is that possible?
@@davidcarver7285 did you ever get an answer I have the same problem right now
I can’t get the hang of rev matching with my drive by wire, my last truck was drive by cable and I could rev match perfect
Hey guys I have a question would really appreciate someone getting back to me I swapped a 6.0L L96 into a 1998 corvette and I cannot change the throttle body because my car is a pre 2000 brain car and it will not let me tune the throttle body so I’m stuck with my tiny ls1 throttle body on my big cam build and it’s begging for more air would really like to put a 90mm throttle body on.
can i simply take off the drive by throttle body and replace with a linkage throttle body on to convert my engine to now fit the car with a linkage pedal? my potential swap: 05 colorado with a Gen 4 engine (havent made up my mind) thanks in advance for the answers
Thank you for your question. If you want to go Throttle by cable, start with a Gen 3 engine with its 24x reluctor crank. To actuate the IAC valve, use a Gen 3 P01 computer from a 1999-03 Corvette, 99-02 Camaro, 99-02 Truck/SUV (all 24x). Gen. 4 5.3 (with the exception of the 05-06 LH6) were 58X.
Great info every time! Can I change my 08' GM drive by wire to drive by cable & if so what would I need an does Summit offer it?
Hi Tracy,
This would require a different computer, programming and wiring harness to perform this conversion. That will get pricey! Give us a call, maybe we can help. 1-330-630-0240. Thanks for watching!
Did you call them lol
I want swap my 5.7 to 5.3 and 93 taheo what all will I need n due I have swap the trans
I have a gmc 2003 sierra come with fly by wire. Will hp tuners be able to control both on a twin throttle body setup
What’s a fly by wire?
looking for a bracket to hold the throttle cable on the intake. I have a 2005 L33 that I am converting to DBC
Hi joseph,
This would depend on the intake manifold and throttle body you will use. Give us a call, we’ll help you figure it out.
Can a drive by wire b used on any intake
Tavares Smith no only on 4 bolt throttle bodies, LS3, LS7, L92 and a couple of other truck/car motors. Gen 3 and some early gen 4 engines, LS1, LS6, LQ4/9, LM7/LR4 all are driven by cable
I thought the wire was the cable...... Still have much to learn
Yeah its kind of named on purpose to confuse people i think. Always go for mechanical throttle if you care for driving experience. electronic throttles kill most of hte enjoyment from operating a car itself...
So I'm doing a Chevy vortec 4.3 swap and looking for harness...dont really know where to start
lt1 swap.com
I've been looking for a mechanical throttle body for my 2010 Jetta 2.5 the electric one is sloppy and slow
tyler jenkins yup. It's all economy and anti hooning bullshit
I am a qualified "old fart". I have a lot of experience with points, plugs, mechanical advance distributors, broken throttle springs, and on and on and on. I'll take electronics any day over all of that old mechanical crap, especially in Detroit Iron of the "good" old days. Tuning - just plug in your laptop and change the throttle response curve and such. How much easier could it be?
Can hp tuner turn knock sensor off
Anybody got any advice, Im swapping cabs and my one good cab is a drive by cable and the bad cab is a drive by wire. I'm going to an 8.1 but don't wanna have to rewrite the whole truck.
Rowdy Yates if you swap from anything to 8.1, it will need a quazi-engine rewire. 8.1 doesnt share a harness with any other motors because it has a distributor and 8 coil packs but the LS firing order.
Hahah when people say drive by cable have faster reaction than dbw.
electromagnetic waves at about the speed of light, which is 670,616,629 miles per hour,1 or 300 million meters per second.2
Super mariyo its depends on your leg sissy
accept for the fact that if your cable is dialed in perfectly the throttle is instant based on actuation and direct connection to your foot, have you ever used a computer? there is something called latency and all electronics suffer from it, unless the enviornment is perfect the electronics wont react the same every single time, but a mechanical connection, if maintain, will be instant every time, i know you can tune reaction and potentiality on the electronic pedal and sensors with the right software but the having your hand on the throttle when reving an engine is essentialy the same as connecting a cable to your foot lever...lol waves travel fast but vehicles and relays and sensors all have something called resistance built in...mechanical is better. obviously IMO to each their own
Good video👍👍👍👍
NOTORIOUSCARCLUB ,
Thank you! Let us know if you have any questions or suggestions.
any valid links for the 5.3 engine swap kit?
how do I hook my 700r4 trans to a 5.3 vortec
myron boyd you have to buy the ls/700r4 flywheel that connects them together. I'm doing the same with my c10 pickup
Not much information here.
then move along...
nice sir
Thank you for watching, ipanase!
Drive by wire is slow and laggy
thats right to much work to put it in plus take way to long to find out whats wrong
By wire is like step back in car industry. F that!
Hey great video I have a 2001 BMW 318i e46 engine single over head cam engine and replaced it with e46 dBm overhead cam engine the earlier e46 engine had cable drive throttle where as the later engines electric throttle( wire( any ideas on theyare wiring harness solutions
harness
Nothing wireless is a step back. Easily tuned for your needs in the programming. Cheers
I've got an 09 F-150 its drive by wire, and I absolutely hate it. Cant pull out in traffic when you need to. Why in God's name did drive by wire ever become the industry's standard I'll never know
Just for a joke turbo charger by wire 😀
damn shame that we live in a world where I need to LS swap my new truck because new engines are hot garbage honestly all of them... it doesn't matter the manufacturer. they're designed for emissions, efficiency and economy these days. nothing else. reliability gets affected drastically for those other areas to be great
I freakin hate drive by wire
Your mic is so sensitive you can hear how dry your mouth is.
So boring