Black Dice Ep. 8 | Installing Disc Brakes and 2.5 Inch Drop Spindles. Installation and Tutorial
Vložit
- čas přidán 25. 07. 2024
- Simple.C10's vision is to encourage and empower the C10 community by offering parts, resources, and DIY videos. For a step-by-step guide to bagging your C10, check out the tutorials section of my website! www.simplec10.co
Here are a few things that the new website offers (www.simplec10.co)
→ Exclusive Parts for your C10.
→ DIY Tutorials, including my step-by-step "Air Ride Guide".
→ Links to all my favorite C10 parts with reviews!
→ Build Profiles for all my past builds.
→ Simple.C10 Merchandise.
Thank you for your support and encouragement!
→ Become a Simple.C10 Subscriber!
→ Website: www.simplec10.co
→ Instagram: / simple.c10
→ Facebook: / simplec10
→ My Channel Home Page: @SIMPLE.C10
→ As an eBay/Amazon Associate, I earn from qualifying purchases.
If the video was helpful, remember to give it a "thumbs up" and consider subscribing. - Auta a dopravní prostředky
Would like to have seen some Wilwood breaks
Maybe one day.
Do the rotors come assembled to the hubs? How thick are the rotors? Will the booster rob too much vacuum from the engine?
Yes they do on this kit.
Little tip for lower control arm. Square body U bolts are 9/16". Compared to 1/2" for older c10s. Easy to drill out the crossmember holes and use a more heavy duty U bolt.
Dorman part # 13503.
Thanks
Awesome 👍
Thanks
If you just keep the stock spindles in there how low will it get you to layin frame? Just curious
You would be about 3.5 inches off the ground and a lot worse camber with drum brakes.
Muito bom os vídeos da caminhonete aqui do Brasil assistindo
Ty
The bag just basically sits in the pocket loose? it doesn't need to be bolted tight somehow?
It bolts in through the middle bottom hole of the control arm. You can see me tighten it with a wrench after I install the control arm.
I have 62 a lot of parts are different.
Yes. 60-62 frames are different than 63-72.