Another difference is that the 4 dies are closer together which makes a more uniform beam. That way flashlights no longer need orange peel reflectors and can just use smooth ones with the second generation XHP
hahah thank you for the video, very informative!!! I looked at the serving plate and i was like "hmmm that's eastern tech" looked at the name.. Vlad hahaha :p (My granny has the sameeeeeeeeeee)
... so much for the other weirdo comments. Enjoyable video! The best plates are still the old ones, the best beer is the best tasting one but ironically it is a lager, and the best LED is probably the newer one. But things appear deceptive. Interestingly, all the yellowness appears to be done to camouflage away the division of the LED array into four quadrants; the centre square and gaps of which were identified as the reasons for uneven illumination and darkened central spot. So I wonder if people just think they are not seeing uneven illumination or somehow the yellow dome and yellow die base scatters the dark spots away (especially since the colour temperature is unchanged). Most likely the latter explanation is in effect. A rational supported if only arrays with divided quadrants are getting yellowed. So have all the X.2 upgrades been yellowed or just the larger ones with visible quadrants? If all are getting yellowed then that effect may also help illumination in further other ways. Interesting, how companies don’t explicitly reveal their upgraded design strategies in the advertising literature.
It would be nice if you could get straight to the point. Point out the differences visually would take 1 min. And the also see the difference in performance (powered-on), since you have "vs" in the title.
I know but then I would get negative comments like " This is boring as hell, you could get a little more creative to make it more interesting" Next time I will make two videos of each item to make everyone happy but I'm sure there will still be someone complaining. I can't make everyone happy no matter how hard I try. ....... Those two have not noticeable difference in light power.
LOL...i wonder y so many thumb down.............think title should put........ Difference between XLamp Cree XHP70 and Cree XHP70.2 .....instead of VS......kind of misleading
Max.lumens are their differences but not that much. Without lumens tester you cant tell the difference by just looking at their beam pointed to an object. I have the 70 first gen..and so powerful enough for my application which is motorcycle headlight.
OK video, good for beginner light enthusiast. Just try and make a bit shorter and that would probably help. Make a small video plan outline and stick to the points without repeating and you'll be good. I up-voted also; Hope this helps.
@@VladFredK no my flashlight is brand new i get it in good deal its the trustfire mc3 and comes with the xhp50 led from my collection i find our that cree leds have more coll white tent than luminos and i like that thanks for your help and kindnes mate
No it doesn't. Even at bin the cbt-140 says around 3,600 lumen and the xhp70.2 says around 4,000 lumen. The xhp70.2 can be pushed to over 9,000 lumen at 145w with proper cooling.
@@vengeance187 HAHA yea the price is an Ouch but I managed to get a bunch of NOS for under $15 each. As for the cree i could not find mention of them rated for any higher than 3K lumens In fact IIRC I only saw minimum specs listed. Ill have to look again. I hate Cree;s spec sheets. In other news I may have also found a source for 35K lumen cobs but still trying to confirm the model #s.
@@VladFredK With my eyes. Cree literally said they decreased the gaps to reduce the cold spot in the beam. You really have no idea what you are talking about do you? No wonder your video has more dislikes than likes.
@@TheRattleSnake3145 You know what Cree said but most people don't and if you didn't would you be able to see it? The point here is to point out the difference for average user... just in case you didn't get it. And where is your video to help other people if you are so smart? That would be the right thing to do instead of bashing my ass here. Everyone has big mount criticizing but doing nothing to help.
AT LEAST HE TRIED TO HELP SOMEONE, EVEN IF HIS ENGLISH IS NOT THE BEST AD HIS HANDS AREN'T THE CLEANEST, HIS WORDS ARE OF LIGHT, BECAUSE HE TRIED TO HELP SOMEONE, YOU PROBABLY SPEAK ENGLISH BETTER THAN HE DOES, YOU MAY HAVE CLEANER HANDS THAN HE HAS, BUT SINCE WHAT YOU WRITE IS LIKE COMING OUT OF YOUR MOUTH AND CARRIES THE SAME WEIGHT, YOU HAVE TO WASH YOUR MOUTH OUT IF YOU WANT TO ENLIGHTEN YOUR SOUL BECAUSE YOUR WORDS ARE INTO THE DARKNESS, INFACT ARE NOT THE DIRTY HANDS TO MAKE A SOUL UNCLEAN, BUT IS WHAT COMES OUT OF THE MOUTH BECAUSE PROCEEDS FROM THE HEART, AND THIS IS WHAT DEFILES A PERSON.
Another difference is that the 4 dies are closer together which makes a more uniform beam. That way flashlights no longer need orange peel reflectors and can just use smooth ones with the second generation XHP
hahah thank you for the video, very informative!!!
I looked at the serving plate and i was like "hmmm that's eastern tech"
looked at the name.. Vlad hahaha :p
(My granny has the sameeeeeeeeeee)
Действительно вкусная еда.
Eres muy inteligente amigo, no sé hablar inglés, sin embargo te pude entender un poco. 🤗🤗🤗🤗🤗
... so much for the other weirdo comments. Enjoyable video! The best plates are still the old ones, the best beer is the best tasting one but ironically it is a lager, and the best LED is probably the newer one. But things appear deceptive. Interestingly, all the yellowness appears to be done to camouflage away the division of the LED array into four quadrants; the centre square and gaps of which were identified as the reasons for uneven illumination and darkened central spot. So I wonder if people just think they are not seeing uneven illumination or somehow the yellow dome and yellow die base scatters the dark spots away (especially since the colour temperature is unchanged). Most likely the latter explanation is in effect. A rational supported if only arrays with divided quadrants are getting yellowed. So have all the X.2 upgrades been yellowed or just the larger ones with visible quadrants? If all are getting yellowed then that effect may also help illumination in further other ways. Interesting, how companies don’t explicitly reveal their upgraded design strategies in the advertising literature.
It would be nice if you could get straight to the point. Point out the differences visually would take 1 min. And the also see the difference in performance (powered-on), since you have "vs" in the title.
I know but then I would get negative comments like " This is boring as hell, you could get a little more creative to make it more interesting"
Next time I will make two videos of each item to make everyone happy but I'm sure there will still be someone complaining. I can't make everyone happy no matter how hard I try. .......
Those two have not noticeable difference in light power.
Your fine. Don't worry about the thumbs down. People are idiots. You are just a little bit of a comedian (and eccentric). Thanks for the video.
Just trying to make it a little more interesting. Thanks
LOL...i wonder y so many thumb down.............think title should put........ Difference between XLamp Cree XHP70 and Cree XHP70.2 .....instead of VS......kind of misleading
Max.lumens are their differences but not that much. Without lumens tester you cant tell the difference by just looking at their beam pointed to an object. I have the 70 first gen..and so powerful enough for my application which is motorcycle headlight.
OK video, good for beginner light enthusiast. Just try and make a bit shorter and that would probably help. Make a small video plan outline and stick to the points without repeating and you'll be good. I up-voted also; Hope this helps.
Thanks
U r right Sir
Which one gets hotter after 10min?
price per chip?
Good explained !
because you didn't compare the brightness, that's why
Can I swap second generation led instead of first generation?
Yes
Привет, можно подать 8.4v ?
keep doing................ Cheer
Hi vlad if i have a xhp50 led flashlight it make a difference if i will switch to xhp50.2 thanx
you won't notice any difference unless your XHP50 is old and used a lot. They tend to loose brightness over time.
@@VladFredK no my flashlight is brand new i get it in good deal its the trustfire mc3 and comes with the xhp50 led from my collection i find our that cree leds have more coll white tent than luminos and i like that thanks for your help and kindnes mate
When it comes to shear lumins the Luminus CBT-140 has it beat though way less efficient.
No it doesn't. Even at bin the cbt-140 says around 3,600 lumen and the xhp70.2 says around 4,000 lumen. The xhp70.2 can be pushed to over 9,000 lumen at 145w with proper cooling.
Let's not mention the price difference. 😂
@@vengeance187 HAHA yea the price is an Ouch but I managed to get a bunch of NOS for under $15 each. As for the cree i could not find mention of them rated for any higher than 3K lumens In fact IIRC I only saw minimum specs listed. Ill have to look again. I hate Cree;s spec sheets. In other news I may have also found a source for 35K lumen cobs but still trying to confirm the model #s.
@@lazerman121 budgetlightforum.com/node/58094 There's the test. He said the sweet spot is 104.25w at 8,379lm.
@4:07 Kelvin Kelvin whatever 😂
good video though 💪☇
your wife should be a professional chef. We want a taste of that
actually........she is :)
Price $
2018 was $50
Can.I turn on XHP70 by many IC7806??
What is IC7806 ?
this IC can make 7V~35V to 6V
@@tysesty But I can't know the output amps...
@@34Gw you have to know
@@34Gw Amps?
Yo tengo linternas con esos chip y la mera verdad no tienen mucha potencia
You would have to be blind to not see the old version has a bigger cross in it.
realy? I must be blind :) but the cross is exactly same
@@VladFredK you can easily see the cross difference at 3:13 or doing a quick google search
@@TheRattleSnake3145 the cross is almost not visible on the new LED cose of the color of the dome so how can u see the difference?
@@VladFredK With my eyes. Cree literally said they decreased the gaps to reduce the cold spot in the beam. You really have no idea what you are talking about do you? No wonder your video has more dislikes than likes.
@@TheRattleSnake3145 You know what Cree said but most people don't and if you didn't would you be able to see it? The point here is to point out the difference for average user... just in case you didn't get it. And where is your video to help other people if you are so smart? That would be the right thing to do instead of bashing my ass here. Everyone has big mount criticizing but doing nothing to help.
How can i buy 4 piece i need them can you send me and i send you money thanks
I don't sell them.
@@VladFredK where can i find them please
EBay or Amazon
test light mister..
max disinformative video
Nice chinese copy of xhp leds
Too long, not much of new information, too bad English and for God sake, put some hand cream before these close ups!
:)
AT LEAST HE TRIED TO HELP SOMEONE, EVEN IF HIS ENGLISH IS NOT THE BEST AD HIS HANDS AREN'T THE CLEANEST, HIS WORDS ARE OF LIGHT, BECAUSE HE TRIED TO HELP SOMEONE, YOU PROBABLY SPEAK ENGLISH BETTER THAN HE DOES, YOU MAY HAVE CLEANER HANDS THAN HE HAS, BUT SINCE WHAT YOU WRITE IS LIKE COMING OUT OF YOUR MOUTH AND CARRIES THE SAME WEIGHT, YOU HAVE TO WASH YOUR MOUTH OUT IF YOU WANT TO ENLIGHTEN YOUR SOUL BECAUSE YOUR WORDS ARE INTO THE DARKNESS, INFACT ARE NOT THE DIRTY HANDS TO MAKE A SOUL UNCLEAN, BUT IS WHAT COMES OUT OF THE MOUTH BECAUSE PROCEEDS FROM THE HEART, AND THIS IS WHAT DEFILES A PERSON.
Dude, he's Not doing a video for pretty hands! LOL who cares what his hands look like, its all about the lights