Fluke 179 Teardown and Faded Display Quick Fix
Vložit
- čas přidán 16. 10. 2022
- Fluke 179 replacement elastomers:
multimeterparts.com/product/f...
Step by step teardown of the Fluke 179 Multimeter with instructions on how to quickly clean the elastomeric connectors. This will help with faded, fading, or ghosting displays.
#testequipment #multimeter #multimeterparts #fluke179
Elastomeric Connector replacement parts for Fluke 175, Fluke 177, and Fluke 179 may be found here: multimeterparts.com/product/f...
Thank you dear for this operation of dimmed Fluke Display.
Great information tried it on my fluke, 87 and it worked just like you said thank you again .
Terrific! We're glad it worked out. Thanks for your feedback.
Hi
Just one remark; try to avoid touching the cleaned edges of the contact strips with your bare fingers because the skin fat/fluids could corrode the contact points again quicker(!?) than normal.
This stands for all electric contact points!
Excellent point and comment! I am always surprised when these content creators do this, but some will clean the board ultrasonically, but it would be unnecessary if they wore proper gloves. The creator here did have good content, but I was thinking the same thing! Peace
Hi
Great information, i would like to ask you that my 179 have problem in LCD display was not faded but have a black spots such as sunburn LCD, can i only replace the LCD polarizer layer or it should replace the whole LCD?
And the other problem is the selector knob was broken, can i replace the selector knob? Because i cant get the replacement knob in Indonesia.. i’ve already looking for the knob in several e-commerce in indonesia
Many thanks
We apologize for the late reply. When the LCD is bleeding, as in the case of the black spots, then the only solution is replacing the LCD. We do not have this in stock at the moment, but we are updating our inventory and website. Let us know what you're looking for and we'll do our best to accommodate. Thanks for checking us out.
Do you have a link to purchase the new gray version of the strips?
These gray Fluke 170 Series elastomeric connectors may be found on our website here: multimeterparts.com/replacement-parts/fluke-170-series-elastomeric-connectors-j1-j2-650264-replacement/
Thank you, and we look forward to accommodating your parts requests.
Hi. My 179 has low contrast. Especially when looking at it straight from top, or at a slight up angle. It is somewhat ok if I'm looking from below. (shallow angle)
Any idea what causes this?
Thanks.
I think it's normal for the 170 Series to have dimmer appearance when viewing from slight up angle, and it gets better, and best when viewing slightly from below. If the display is uniform dim, then I'm not sure what would cause it, other than a weak battery, or cosmetically faded top case window, or LCD itself from direct sunlight. I have seen this in older Fluke multimeters with this issue. If cleaning the elastomer contacts doesn't improve the display, then replacing would be the best step to ensuring a nice clear readout. At least then you can rule out the LCD as being the issue. The good news is that the Fluke 179 LCD is still available for purchase online anywhere from $30-$50. I may have at least 1 in stock. Thanks for watching and commenting. Hope this helps.
Actually the display got partially damaged, ultimately it will became more fade.
Your cleaning cloth should be lint free!!