7 Simple Longboard HACKS
Vložit
- čas přidán 24. 06. 2024
- Going over some simple longboard & skateboard hacks that'll hopefully make your life a little easier. Drop a comment if you can think of anything else that'll help others.
concretewaves.com/longboard-h...
CONNECT
concretewaves.com/
Instagram: / cncretewaves
TikTok: / cncretewaves
Facebook: / concretewave
ABOUT CONCRETE WAVES
Our mission is to get more people into skateboarding and carry it as a lifelong passion. Skateboarding is more than just a wooden plank with four wheels. It's a way to connect with friends, leave behind the daily grind and express who you are. No matter what style you choose, it's all valid. The ride is the reward.
#longboarding #shredshack #concretewaves - Sport
![6 TIPS to cruise through urban obstacles | [ LONGBOARD TALK EP.3 ]](http://i.ytimg.com/vi/2-2M6DgwsdU/mqdefault.jpg)
shred shack more like shred hack
Bruhhhh I missed a major opportunity there 😂
shred shack hack attack!
@@concrete-waves Make it into a series/playlist - ShredHacks.
@@concrete-waves I really like the cruisers board u used for the video
Where did u get it from
They’re from Loaded - the Coyote & Omakase
Friday's have started to become one of the best days of the week. I wonder why.....
Ayyy I appreciate that a lot! Stoked to hear that
@@concrete-waves always makes my days seeing a notification for one of your vids, keep up the grind 🤙
How does this guy not have more subs?
Appreciate that!
Videos with the basics are great and are a necessity for the community! Thank you for filming this!
These guys deserve so much more than there getting
That squeaking tip actually really help me a lot with my roller skates, and it seems that everyone in roller skating I asked, they didn't seem to have an answer for it!
Thanks for the wax in the pivot cup idea!
Would love a video on some of your favorite safety gear/helmets & stuff!!
Great channel! Started skateboarding pools/parks&ramps in the mid-70s then stopped after high school until taking an interest in longboarding recently and I replaced the old 1970's Tracker Mid-Track trucks and green Kryptonic 70mm pool/park wheels on my 1977 Alva Original #1 with 180mm Paris V3's and Blood Orange Liam Morgan 65mm 80A wheels. Keep up the good work and have fun!
If you want to bomb hills, put softer bushings on the road side of the hanger and harder on the deck side. You want your back end to be slightly softer than your front truck. This can help reduce speed wobbles in general because you will have more control of your backend. Ideally you would have a lower angle baseplate in the back, but this should help you hit hills.
Oh no way? I never knew that. Really appreciate you sharing this Nate! I'm gonna try this one out
Ive been boarding for almost 1 year now! Thanks for tips, awesome quality as always!!
Your channel is very informative, particularly for a beginner like myself.
Thank you.
Thanks for the tip on squeaking, I've never disassembled my trucks so I hope I don't over tighten them when I put them back together
When you’re tightening your kingpin, as a general rule of thumb, screw down to where the kingpin nut is flush with the top of the kingpin. See if there’s play in your trucks, and if there is, screw down 1/2 rotation, and see if there’s play again. Once the trucks have no play, you’ll be good to go.
This is not a rule of thumb, but when I reassemble my trucks I can usually see 1-3 threads of the kingpin depending on my setup.
Thanks man, new to skateboarding and these videos have been giving me a next step forward.
great content, great channel and vibes!
Really appreciate that! Thanks for watching and dropping a comment
Just got back into boarding. Been inconsistent for 20~ years on a board with a break of 5ish years in between. Appreciate it!
Another great video, just got my first cruiser. Thanks!
Awesome! Have fun with the new cruiser 😎
Awesome mate. Awesome stuff. Keep it up!!
congrats on how your channel has evolved ! Great content, high end production, keep it up bro !!!!!
Stoked to hear that Richard, thanks!
you should try out something called a freeboard, it’s like a longboard with a third and fourth 360 degree rotating wheel. it’s supposed to simulate snowboarding in summer on concrete!
The last one is the only new one I heard. Will definitely be using it! Great Video
Really digging the new shred shack Fridays 🤙🏼 epic brah 🤙🏼
Thanks man! Appreciate that
Good ideas! Thanks
Love your videos. Super helpful for a noob like me.
Thanks for the hakss. I’m beginner really appreciate. 👍
Was worth watching till the end cause that last hack was super useful. Thanks for the vid.
Stoked to hear that man, thanks!
Thank you for being to the point! This is tl;dr maintenance!
What I found is that when you're cleaning your tape you can use gardening gloves to protect your fingers. It's a bit overkill and you'll really only do it at home, but it allows me to have peace of mind when cleaning absent-mindedly.
Hey man, super useful video. Great production quality as always. I'd love to see a review of the Pantheon Ember - they market it as a cruiser/commuter board, seems right up your alley.
Interesting, it seems really affordable too. Thanks for the suggestion man!
It’s a sick deck. Low to the ground, flexy, nice wheel cutouts that prevent wheel bite, and perfect for going distances. Similar decks would be the Quest and the Wanderlust (not sure if he has these in production). But the Ember is a solid deck for pushing.
Note: it is not a deck you should ride on hills.
Best channel ever
Graphite spray lubrication (used for key holes in locks) is great for the bushings and truck parts too. It can get messy so use it outside over something you don't want a black stain on if a drip occurs. The bad thing about wax is that it will invite dirt and grime to accumulate in those areas, whereas once applied the graphite spray is dry and not sticky, so less chance of accruing dirt in those areas.
Great video as always, keep em coming. I enjoy your laid back review style. You and your crew should do some videos of just skating too. Cruising, carving, antics, whatnot. Like the snowskate video, that was fun to watch.
Thanks for putting out useful and entertaining content, keep it up!
I've been skateboarding since the '70's and I knew that gum rubber was good for cleaning sand paper but I never thought to use it on griptape. Shoe soles are made of gum rubber sometimes which is what I always used. Second hand stores are a good place to find those. I also love the wax on the urethane parts of the truck suggestion.
Keep up the work!
Thanks! Really appreciate your support!
Just got my omakase 😁
Can’t wait to carve. Thank you for all the motivation and great content.
As for the paraffin / wax / soap application to counter pivot cup squeaking, there's also a graphite pencil core dust alternative to substitute, which is less greasy (thus, easier to clean), however also lasting less.
You should do a review on one of the 121c carbon fiber boards. Super sustainable for the environment not to mention nye indestructible. Would be awesome if someone like you did a review on them since like no one has really done an in-depth review of these boards. Just a thought. Love the channel BTW keep up the awesome vids. 🤙🏻
shred shack do be hacking dem boards
Drop the shred shack merch brudda🤙🏽
great video!! would like to se a review of decathlon dancing longboard
Always love new videos even when I know all of the hacks
Appreciate you watching regardless! Means a lot
Can you do a video on risers; all risers, shock pads to angles...etc...
Been longboarding since 2011 and I've never heard the wax in the trucks trick before. Something I'm gonna try for sure!
Awesome man! Thanks for watching
Didn't actually know all of these, thanks!
Awesome! No prob - thanks for watching and dropping a comment
Interesting! Cant wait to use those someday)
Stoked to help! Thanks for watching
It would be cool, to see a review of lean board.
Ahhh I know - definitely wanna get to it... just gets expensive buying everything haha
@@concrete-waves food sometimes is overrated 😁
Love your videos. Was wondering if you good do something about gullwing sidewinder trucks. I've just started & I bought a Sector 9 Bamboo Binco. Can't find much on YT.
you can use vaseline on pivot cups and trucks for it to be silent
You can also use a shoe brush to clean grip tape
I do hard bushings board side and soft bushings road side, let's me dive into carves but has much better rebound than just having the soft bushings.
Great vids as usual. I wonder if you guys could do a review of DKL Skateboarding griptape. I love it for cruising and saving my hands and shoes.
Looks super interesting! Might have to order some to test
good tips! graphite works too for the pivot cup squeak. just shave off some pencil lead in there and you'll be good to go.
Thanks! And really? Never heard of that one before, but I'll for sure try it
Nice hacks!
Thanks for watching! Appreciate that
Don't mind me, just trying to help with the algorithm. Keep up the good work, guys!
Haha thanks Ronn! Appreciate your support
commenting for the algorithm, very cool video
Ayyy thanks for commenting for the algorithm, means a lot!
whatss uppp sorry i wasnt early today bro
can you do a video showing how to take the bolts out? I hear what your saying but I'd love to just see how it's done, thanks!
i´m still watching it but you are the bests!
Appreciate the support Ian!
@@concrete-waves WOW firts time the youtuber answers my coment :)
Can you do a video on skate racks/stands? Seems floor stands have an issue with spacing for longboards/surfskates
BTW KEEP UP THE GOOD WORK
Appreciate that!
if the board is squeking, it is also because there is no grease left in the hole of the base plate, which causes more feiction, which results in squeaking, so you can get some lithium grease (the sticky annoying stuff) and put it in the hole of the base plate where the hanger goes (idk what it is called
Graphite dust works for squeaking too
an even better squeaky truck fix is a drop of silicone oil in the pivot cup. If that doesn't fix it, then a drop on the bushings... Don't use petroleum oil, since that dissolves plastic...
Question I really hope you’ll get to: Does the bones bearing cleaner work with bearings with built in spacers?¿
Thanks! been meaning to clean my griptape...
Nice dude! Thanks for always coming back and supporting
Can you do review about the landyachtz drop cat 33
Heh. Thanks to my work my hands barely survive a day without a scratch. But thanks for the heads up on the holding angle
what do you think of long island boards ?
Gotta try change bushes on my Carver... it needs help vs. my far better Yow... looking forward to trying Smoothstar but they're like hens teeth these days...
All right question here from a guy who wants to get back in longboarding: I have a 2012 (I think) land yatch drop carve that I really like. But now I am mostly cruising around and for that I feel the ride a little to rough. If I change the wheels for something bigger and softer (I have now my old mini zombies 70mm 80a) will it really change the smoothness of the ride? We ride in the city with lots of imperfections on the road.
Any tips on what to do if we use new bearings and the truck axle has extra space on the side after tightening the axle nut? I switched zealous bearings onto my hawgs but the original spaceball bearings were a little wider so the axle nut would screw on perfectly leaving no extra space on the axle. However, with zealous it would appear that there is a little left over on the truck axle (should this be something to be concerned about?)
i was paranoid about my longboard making that weird skeking sound but thanks to saying that it is the truck
Is there a smooth way to put the dinghy on the ground I recently got one and I either bend over and put it down or drop it regularly and it bounces
Can u review the atom drop through 41 inch longvoard?
Yooo not sure if we'll get to that one, just cause it can get expensive buying more & more boards. But I appreciate the suggestion
what cleaner do you guys use? like the fluid you put in the container
I just use a citrus cleaner like pinsol, but make sure to completely dry each bearing with a hairdryer or air compressor before using speed cream
I dont even skate and i like this channel 😄 👍
Hi sorry off topic where do i buy some bushings for the yow meraki s5 i
Hey do I ask here if I have any questions about what board I should buy?
Can you also use silicone spray or lube on the pivoting cups? I see no reason not to and it seems a bit more sensible than tiny parts of wax despite that working too I guess
They attract dirt and graphite does not.
Instead of paraffin or wax, you can use silicon fat lube. It's very effective to get the squeaking away and protect the rubber.
Unbelievable how much you guys have blown up since the beginning it’s so well deserved
Really appreciate that! Thanks for showing support 🙌🏼
🤙
Sorry for being late😔 I just got back from surfing and now checked my notifications
Late?! You're still maddd early haha. Hope you scored some solid waves!
@@concrete-waves I did, but now I'm back to studying🤫
how i make my cruiser stop vibrating loudly (it aoybds a lot)
Vaseline or plumbers grease help dramatically with squeaking.
What sort of bearing cleaner do u recommend, bro? I saw too many recommendations and it gets confusing.
I've used a citrus cleaner like pinsol, then completely dry them out with an air compressor and finally lube up with some speed cream
1:33 nice curfboard ;)
thanks yo
Yeah! You guys got one :) :)
What kind of cleaner would you suggest for bearings?
Honestly, I've just used a citrus cleaner like pinsol. What have you used before?
@@concrete-waves Just regular rubbing alcohol? That's what I saw online a while back.
Miss ya termine de leer la nota final de la clase pasada le escribí a la profesora que le había enviado la información que le había enviado la semana que viene y no me ha llegado nada de lo que me dijo que le había enviado
Hey can u make a videos about crusierboard tricks there is no videos like that I can find
Maybe in the future, thanks for the suggestion Charlie
bruh I'm gonna be done good when I get my board thanks to you B)
Gotchuuu! Thanks for watching and dropping a comment
What board is at 3:10?
Noti Gang
Yewww appreciate you always showing up! Means a lot
I never knew about candle wax I would just buy new bushing lol
Heavy wheels in back ✔️ I'll try for sure .
You mean bushings?
Where can I find the hoodie
It hasn't dropped yet - still testing different materials before we release
Commenting for CZcams algorithm
Kick a flip one time
3:48 lithium grease should work or maybe graphite.
Haven't thought of lithium grease before 🤔 But I don't see why it wouldn't work. Thanks for the suggestion
@@concrete-waves Silicone based grease also works, I put it in all my pivot cups. I also upgraded to Riot Cups (Except for my Sabre trucks which already come with decent urethane pivot cups). Putting (silicone) grease between bushing and hanger might be too much - depending on the bushing seat of the hanger. In some cases (more open bushing seats) the bushing then will move around way too much and resistance against turning goes way down.
When you need a new cruiser cuz your old one got too old 😪
oh nooo really? Which one you thinking about getting?
@@concrete-waves Yeaa I’m thinking about getting a dinghy I’m still looking tho
@@_deolarte Dinghy is solid! They're just on the smaller end
@@concrete-waves Im okay with that I needed something more portable
New vid!
yesssirrr!
That grip stick at the beginning also causes cancer if you inhales those small particles of rubber that get scrapped off when you sand it on the grip tape. Just be careful
Whoa, seriously? I’m gonna do some research on it, thanks for letting us know. That’s scary