Raz, Serpent & XRAY actually make thing called 1/8 GT Nitro car...from what I hear they are very fast & are raced on miniature track similar to real race car! hehe Cheers
@@RazShifrin there should be 2 screws, the one that’s easy to turn is the one you wanna adjust, it should be a different color, the other screw is a set screw that needs to be tight
Sounds like the 2 speed needs to be adjusted 🧐 You can buy a clutch bell with more teeth, for higher top end speed. Arrma & Traxxas, would Love this Video 😂🤣 Excellent project 👍🏻😎
This is such a refreshing channel to watch. Like, literally nobody else... unlike literally anybody else on the platform. the smile, the character, the charming face and voice. I Just love it. :)
I love Nitro RC cars! That is one amazing build! Glad to see what started this all off is still being appreciated! Like everyone else says- Go to metal gears or slipper eliminator and metal prop and drive shafts if you start snapping those too. You cold probably add in the Traxxas TSM (Stability Management & Traction control) from the high end nitros to make it more manageable and track dead straight when it'ssupposed to. Also the second gear shift point can be adjusted on that transmission by turning the little adjustment screw. I think it prefers to shift earlier rather than later so get it shifting early then tune it to shift later back from there. Lots of info out there on that issue though
i had that issue with my custom tmaxx with those plastic gears, you have to make sure that the engine and transmission are super straight or else it will just eat up gears, i actually found out i had too much chassis flex in that area causing it to get of center and start grinding it, awesome build though i was wanting to put a nitro in a xmaxx one day just to see lmao
@@jakobc9348 I had seen a kit from the old days for full size cars the converted a one-barrel carburetor to use nitromethane and part of it included replacing the fuel supply line with like a half inch three-quarter piece my understanding is with nitro rich is best. And for every 10% nitro you add to methanol you have to double the surface area of the jet. But I'm a little nuts so set it stupid rich and start at like 10%
I loved nitro in my RC youth when i ran an RC10GT off-road and a serpent Impact on road … the sound and smell is amazing… but electric is so much easier, faster and generally more fun. I used to have to smuggle my fuel into the bus when I was going to track to race at 15. Ahhhh fun times
Dual motor is crazy OP 😍 the Quad motor is just outright insanity 😄😎😍 and history tells us that to set world speed records you've gotta be abit crazy and driving somthing with an insane amount of power 👌😄😎im so excited to see these run💪😊.
Another awesome video as usual man. Your guys night meets look so much fun. Everyone looks like there having a blast. Awesome build, would be awesome to see it all wheel drive. Either way nice work man
A car like that would rock with an engine from an old thundertiger ek4 and a good 3 speed trans, the ek4 should be able to pull that chassis quite easily
Might need a slipper eliminator or the upgraded HD version from Traxxas that has. aluminum shoe due to high traction conditions. It would also make a good drifter because of the neutral engine placement and chassis balance as a result. I think what you need is the Slayer Pro 4x4 Transmission it has the proper gear ratio for 1/8 GT style tires, the output gear is much taller to compensate going from monster tires to short course tires which are basically the same size as a GT tire.
Perfer Nitros as they're more lively than those petrol ones.. Look into the HPI F4.6 or K5.9 big block for some reall torque to get that big truck shifting! LRP .32 would be another good option for some monster power and screaming RPM
Raz and crew = 🤪😎 Crazy cool 👍 Another entertaining vid bro, unboxed cars as well as the future builds look great… my expression watching all the fun:😁
Hey man that is a cool idea, good on you. With the transmission, it may just require a simple adjustment to the second gear clutch, I have no problem with any of my Traxxas two speeds. Keep up the custom work.
If you're going to keep running plastic gears I would put an air filter on that engine. All those little plastic shavings will be going through the engine when it strips !
Nitro is good for a paperweight lol. My Wife HAAAAAAAAAAAAATES THEM so I am happy with the leaps and bounds Lipo has made. Keep bringing us that amazing content Bro
naw its set to low...its shifting almost immediately when he gets on the throttle...if you listen close in the video you can hear the engine flutter like a rev limiter for a very quick second ..those small light weight tires make it hard to hear...if he had heavy tmaxx tires on it he could hear it clearer....
As always you have delivered on a great and well edited, very entertaining video Raz…. I always look forward to your uploads as I know how long it takes to put a quality video together 👏👏👏👏👏👏👏👏👏
@@RazShifrin yes 👍 I live and learn from a master 😊 thank you for taking the time to watch them Raz 👌🏻👍👌🏻 and your positive feedback is greatly appreciated 😁 I only have limited access to music during editing as I’m not over monetised yet 🤨 I music can help make a great video
Fun vid, nice selection of RC cars to look at. That large buggy looked...interesting. I have an HPI Baja 5B Flux, it goes alright. If you can find one I'd suggest giving it a try. Looking forward to seeing more speed runs, especially that twin motor and the quad motor.
I just converted a km baja 5b to brushless with the Rovan kit. It must have 3 or 4 times the power of the obr 30.5 full mod i was running! Vids on my channel. Btw Pablo i subbed!
Hey bud. Remember to try out those tips i gave u on Fb Messenger on the twin motor car. Goodluck! Together we can break the world record! Shees that sounded cheezy!hahaha!
sounds like its shifting right away because the gear ratio is made for a vehicle with much larger tires. I hear a shift but its so high in RPM..you need a bigger clutch bell or larger tires...or smaller spur
Hey It's shifting supper early, squeeze the throttle slowly and you can hear it shift.....you need to change the shift point to happen at a higher RPM...its shifting really quick like almost immediately when you get on the throttle.
I love the modified Delta Plastik Body! It really sets the whole car off! Great build
Raz, Serpent & XRAY actually make thing called 1/8 GT Nitro car...from what I hear they are very fast & are raced on miniature track similar to real race car! hehe Cheers
Serpent and X-ray Huhh? Are they good like Traxxas and Arrma? 😂
In that category, 1/8 onroad, the finals is last 1 hour race, with box refuel and swap tyres. And the cars are 4wd.
@@jamesrodriguez6055 that have been around way longer bud
They do gt1 and gt2 as well the gt2 has a longer wheelbase
@@jamesrodriguez6055 guess you're not that familiar with rc brands
I love the smiles from it all
There is a plug u can remove from the top of tbe transmission and inside is the adjustment screw for rpm/shift point.
Thanks!
@@RazShifrin there should be 2 screws, the one that’s easy to turn is the one you wanna adjust, it should be a different color, the other screw is a set screw that needs to be tight
Get that QUAD motor built Raz 💪
MORE FG'S PLEASE!!!
I really love that nitro infraction!! Awesome job!
What a lovely custom build! It looks like you evening get togethers are really good fun too!
Raz I always watch till the end....
The cat scene was epic!!
Needs some weight on the rear, and if it's not shifting into 2nd, you may need to adjust the shift screw on the transmission so it will shift earlier.
Sounds like the 2 speed needs to be adjusted 🧐
You can buy a clutch bell with more teeth, for higher top end speed.
Arrma & Traxxas, would Love this Video 😂🤣 Excellent project 👍🏻😎
Excellent video! Love to see your RC community, and the FG Sportlines you unboxed look amazing!
I like your sense of humor 😉. Very beautiful RC's that you opened box of 👍😉👌
Another great video tax can’t wait to see the quad motor run!!
Thanks for your time. Another great video!
Thank you 😊 have fun 🤩
thats dope nitro for life
This is such a refreshing channel to watch. Like, literally nobody else... unlike literally anybody else on the platform. the smile, the character, the charming face and voice. I Just love it. :)
Nice touch with the remote starter , I've built a few two speed cars myself , really like the sound of the car changing up a gear 👍
Nice video can’t wait to see the dual motor car run
that e30 bmw is my fav... great video
I love Nitro RC cars! That is one amazing build! Glad to see what started this all off is still being appreciated! Like everyone else says- Go to metal gears or slipper eliminator and metal prop and drive shafts if you start snapping those too. You cold probably add in the Traxxas TSM (Stability Management & Traction control) from the high end nitros to make it more manageable and track dead straight when it'ssupposed to. Also the second gear shift point can be adjusted on that transmission by turning the little adjustment screw. I think it prefers to shift earlier rather than later so get it shifting early then tune it to shift later back from there. Lots of info out there on that issue though
Another Beautiful Build
Such a genius!
You should makea hybrid RC. One that is nitro and eletric!
Greatest crossover since Avengers Endgame
Amazing video awesome people love all u guys
Keren banget mobil sport remot control waoww sangat bagus selalu nyimak ya Teman dan Sukses trus
i had that issue with my custom tmaxx with those plastic gears, you have to make sure that the engine and transmission are super straight or else it will just eat up gears, i actually found out i had too much chassis flex in that area causing it to get of center and start grinding it, awesome build though i was wanting to put a nitro in a xmaxx one day just to see lmao
Xmaxx I think is more gas sized but 49cc nitro would be sick
@@masjuggalo you know I've got a two stroke 49cc laying around.... Lil bit afraid of that tho
@@jakobc9348 I had seen a kit from the old days for full size cars the converted a one-barrel carburetor to use nitromethane and part of it included replacing the fuel supply line with like a half inch three-quarter piece my understanding is with nitro rich is best. And for every 10% nitro you add to methanol you have to double the surface area of the jet. But I'm a little nuts so set it stupid rich and start at like 10%
very nice video dude
I like this💯🔝💪
What a cool idea - combining the visceral experience of nitro with modern design and handling!
I loved nitro in my RC youth when i ran an RC10GT off-road and a serpent Impact on road … the sound and smell is amazing… but electric is so much easier, faster and generally more fun. I used to have to smuggle my fuel into the bus when I was going to track to race at 15. Ahhhh fun times
Electric being easier and faster I'd agree with but defo not more fun! 😄
Electric isnt fun lol.
Its lazy and expensive. No thanks
Maybe this will get Arrma thinking....hhhmmmm a nitro?
Best set up I seen in ages
You should put 2 twin lrp.32s on a armma chassis with a low gearing spool
You guys look like a blast to hang out with not going to lie. Looking forward to more Raz
Man you make the BEST videos 🤘 always glad to see a new video from Raz no matter what day it is 💪🤜🤛
Dual motor is crazy OP 😍 the Quad motor is just outright insanity 😄😎😍 and history tells us that to set world speed records you've gotta be abit crazy and driving somthing with an insane amount of power 👌😄😎im so excited to see these run💪😊.
Fun build. I try and revert back to nitro every couple years.
Another awesome video as usual man. Your guys night meets look so much fun. Everyone looks like there having a blast. Awesome build, would be awesome to see it all wheel drive. Either way nice work man
Defo agree! Could do belt drive with multiple belts to get around the engine!
Awesome video raz ur one legend buddy
8:22 sick.
Finally an Arrma with a nitro swap,Awesomeeeeee!!!
The World need a lot more Nitro convertions!!!!
Wow just watched ! Awesome!!
A car like that would rock with an engine from an old thundertiger ek4 and a good 3 speed trans, the ek4 should be able to pull that chassis quite easily
Lmao 🤣 love those sound effects hahaha
Might need a slipper eliminator or the upgraded HD version from Traxxas that has. aluminum shoe due to high traction conditions. It would also make a good drifter because of the neutral engine placement and chassis balance as a result. I think what you need is the Slayer Pro 4x4 Transmission it has the proper gear ratio for 1/8 GT style tires, the output gear is much taller to compensate going from monster tires to short course tires which are basically the same size as a GT tire.
the deeeeeeneeeeeehhh!!! loved the latst one were you sounded like wtf am i doing, rofl love you raz
Great video beautiful cars 👊👊💯💯
I was pretty into nitro about 15 years ago. Don't miss it at all lol.
That was different and weird to see mounted in a limitless!
Awsome video a love all the unique builds🔥🔥🔥!!!
This is great!! I always thought about putting a 30cc 2 stroke engine in my Kraton 8s. Just found your channel and SUBSCRIBED.
Perfer Nitros as they're more lively than those petrol ones.. Look into the HPI F4.6 or K5.9 big block for some reall torque to get that big truck shifting! LRP .32 would be another good option for some monster power and screaming RPM
@@S1MediaHQ I just put an LRP .28 in my HPI Savage xl. Still breaking it in.
Dame Bro! Your one sick ass engineer.
1:26-1:37 Cool impression 🤣🤣🤣
New to the channel, and love RC. Well put together content. Thank you.
Got my perfect pass 👌. Thanks Raz.
Wow!!!
Amazing bro
I've been excited about this video! Is this the nitro you pulled out of the traxxas from last video! Very cool 🔥
Loved it!!
Raz and crew = 🤪😎
Crazy cool 👍
Another entertaining vid bro, unboxed cars as well as the future builds look great… my expression watching all the fun:😁
If you want to save some space and weight the first generation easy start is a lot smaller.
Hey man that is a cool idea, good on you. With the transmission, it may just require a simple adjustment to the second gear clutch, I have no problem with any of my Traxxas two speeds. Keep up the custom work.
Very nice Raz! I had a Nitro 4TEC 3.3 and with lola body I could almost outrun the 1/8 onroad belt-driven Race machines on our local track.
Masterpieces those 4TECs were! 👌
@@S1MediaHQ For sure!
Love the new content Raz!
You guys are doin it right in Israel!
Please tighten that slipper clutch....it will tske off much faster and have much more power....
If you're going to keep running plastic gears I would put an air filter on that engine. All those little plastic shavings will be going through the engine when it strips !
Nitro is good for a paperweight lol. My Wife HAAAAAAAAAAAAATES THEM so I am happy with the leaps and bounds Lipo has made. Keep bringing us that amazing content Bro
Raz, your as mad as a box of frogs, but have to say your video`s get better every time, keep at it man
Awesome vid Raz!!
Love them FGs
Great job buddy
Next year Arrma is going to bring out a Arrma Felony Nitro to match that muscle car look. I bet👍🏽👌🏽😁
Subbed!!!! Epic builds, top notch video, wow. Can't wait to see more. Love the nitro set up, very well executed. Few tweaks she will be ripping good.
Try adjusting the shift point in the transmission it may be set to high
naw its set to low...its shifting almost immediately when he gets on the throttle...if you listen close in the video you can hear the engine flutter like a rev limiter for a very quick second ..those small light weight tires make it hard to hear...if he had heavy tmaxx tires on it he could hear it clearer....
As always you have delivered on a great and well edited, very entertaining video Raz….
I always look forward to your uploads as I know how long it takes to put a quality video together
👏👏👏👏👏👏👏👏👏
Thanks man!! Yes it does..
I've seen you took some ideas and the videos looks great
@@RazShifrin yes 👍 I live and learn from a master 😊 thank you for taking the time to watch them Raz 👌🏻👍👌🏻 and your positive feedback is greatly appreciated 😁
I only have limited access to music during editing as I’m not over monetised yet 🤨 I music can help make a great video
Ditto!
Nice cars
I run plastic gears all the time. It's about the right mesh
So Crazy !!!Amazing!!!!
truly amazing innovation Raz!
superb nitro sound affects ;) that touring m4 was B E A U T I F U L!
always a pleasure to watch!
Fantastic vid! Another banger!
Very nice and clean build
Question what the brand of the BMW rc car
Fg
Love it man awesome job..🔥🤟
Fun vid, nice selection of RC cars to look at. That large buggy looked...interesting. I have an HPI Baja 5B Flux, it goes alright. If you can find one I'd suggest giving it a try.
Looking forward to seeing more speed runs, especially that twin motor and the quad motor.
I just converted a km baja 5b to brushless with the Rovan kit. It must have 3 or 4 times the power of the obr 30.5 full mod i was running! Vids on my channel. Btw Pablo i subbed!
@@Poopdogsays to me?
Don’t forget a air filter for your nitro engine
7:55 Don't worry guy on the right. We tried to figure out what was going on and eventually we cracked a smile too!
Damn, how many new RCs did y'all bring? Nice
Isn't shifting because is rear will drive only and it doesn't get to the rpm for the shifting point
O Man um lindo presente de natal pode manda
Faz um sorteio e manda pro Brazil
Nitro Gang is everywhere
Hey bud. Remember to try out those tips i gave u on Fb Messenger on the twin motor car. Goodluck! Together we can break the world record! Shees that sounded cheezy!hahaha!
Is the centrifugal claw loose enough? And yeh plastic gets hot from the clutch.
Great Job Bro !!!
Love the vid
sounds like its shifting right away because the gear ratio is made for a vehicle with much larger tires. I hear a shift but its so high in RPM..you need a bigger clutch bell or larger tires...or smaller spur
Look forward to next one as always Raz!👍🏻👍🏻👊🏻👊🏻
Just set the two speed setting. Lots of videos on that 😎👊
Nice
Nice fab work
Hey It's shifting supper early, squeeze the throttle slowly and you can hear it shift.....you need to change the shift point to happen at a higher RPM...its shifting really quick like almost immediately when you get on the throttle.