Thanks for the info Ernest. Btw Daystate had a dual reg on one of their FT 12ftlb rifles before they went electric. Model name escapes me at the mo possibly CRX.
Ernest when I tried to set the second regulator after setting first to 180 , after bleeding when I turned the set screw the guage never moved . Air was leaking out of the set screw . I bled the system and started over , filling the bottle to 250. No air goes through the plenum. opening set screw on either regulator air leaks out of either set screw . Blown o-rings ? The reason I adjusted is i bought it brand new and saw that second regulator was reading 120 , so I wanted to set both high and low. 180. 150 . Setting the first to 180 went as if should .Bled , and when i tries to set to 150. the 2nd reg gauge never moved at all .
I would like to know if the magazine hinders left-handed shooters and if there is a possibility to invert the magazine. I did a lot of research and didn't find satisfactory answers on the subject. Thank you in advance for your attention.
Goodnight. I'm Ricardo from Portugal and I follow your channel. I want to ask a question because I am going to buy an FX and I need to decide which one: What is the most powerful weapon in joules in Cal.22? Impact or Marverick? Thanks
Hello friend, I'm Ricardo Ávila from Portugal and I follow your channel. I want to ask a question: How many joules of power does FX Marverick give to Cal. 22 and in Cal. 30? Thanks
When setting first reg, I can't get it above 100 bar 🤷♂️ and further the screw just comes out. What's the issue there? Is European / UK reg version different?
Hi Ernest, watched the video twice. Surely when you open the first reg to bleed the pressure off you altered the setting on it?? Can you clarify this as I've a .25 Compact on order already, many thanks for the great vids by the way.
You open and close it just a mm. Nothing that will effect the relationship to the second reg as the two need to be just in the range of 25-40 BAR difference
After watching this video again, I noticed the same thing. I was looking through the comments to see if anyone else caught it. You did and he explained, done deal.
Hi Ernie,I'm confuse as you adjusted the first reg to 175 and then you adjusted it again to adjust the second regulator.shouldnt both regs be left untouched once set.help me out please as I've just ordered one thanks my friend.
great vid , ive done this set up on my 30cal , using 50g slugs , but i am getting 3 or 4 good group shots then 4 or 5 flyers that are 2 or 3 inches away , any idea whats happening ?
Hi Mike, we are sorry to hear this is happening please call our customer service/technician department so we can help get your gun up and running as optimally as possible.
Ernest--question about my maverick. The final regulator adjust screw is rotated too far towards the top of the rifle. Can't get my normal long hex drivers in there bc the barrel is in the way. Only way I can adjust it is with a stubby end of a hex and turn it about 1/3 of a turn at a time (can't get the hex all the way seated). How does one disassemble to rotate the adjustment screw more towards the side where it's accessible? @FXAirguns
Sorry to hear about the difficulties you are having please feel free to email or phone in to get in touch with our technicians if your experiencing any more troubles. Our email is Serviceusa@fxairguns.com , or call at (866) 639-0772 between 9 am - 4pm EST Monday - Friday. Regards, FX Airguns USA
Once you set that first reg then you went back to it to bleed pressure doesn't that now make that reg go up more than the 170 you had it set at because you obviously unscrewed that reg to bleed the pressure so when you tightened it back down to stop bleeding pressure you now are no longer set at 170? please explain how you bled the pressure without changing from 170!
Well, just did this whole thing on my Maverick. I had to twist the first regulator just a tiny bit in order to degas the rifle. On some videos by just dry shooting it bleeds the air, but in my case it was exactly as on this video - no degas happened until I twisted the regulator just a little bit
Hey Ernest, how are you bud? I’ve been told the dual brass transfer port from the Impact are the same and will work in the Maverick, what about the bolt probe? I have a spare I’ve modified and also a spare pin probe for my Impact, will they work in the Maverick? Thanks Stoti
@@FXAirguns Thank you Ernest. Not a big deal, don’t even have my Maverick yet. I just wanted to know if they were compatible. Have a good one and thanks for the reply. Stoti
Trying to learn from you but it’s not working out well on my end. Just not letting air into the regulator. I actually damaged the 2nd regulator because no air will go back into it.
If I want to fire at 110 bar, the other regulator would have to be at 150, if so, could I only fire until I have 150 bar left to maintain the pressure difference?
Preferably Yes, shooting below the regulator pressure of 150 could effect how the regulators interact. For best results if the regulator is set to 150 only shoot down to 150.
I went to adjust my regs for the 1st time and my second reg is already flush and I feel like if I back it off anymore it’s going to come completely out. What should I do in this case?
you're right , after setting reg 1, bleed air, close reg2 reintroduce air ,slowly adjust second reg to desired pressure. aeac vlog is the better guide,
When the man who brought two regulators into reality says, "i've never heard of this" at (0:18) you feel sarcasm all the way. I think this industry owes you a lot @ErnestRowe
My mavrick does not seem to have the second regulator valve??? why and how? got it yesterday and there is no power limit in my country. have they chnaged the placement of it or??can anyone help..
Nope! Dont have to be a rocket scientist 😀, Also, in the U.S. we have a Technician department that can help guide you through any difficulties just call or email in; Monday - Friday!
So is this making the Impact obsolete? Are we gonna see a drastic price drop in the Impacts? Sorry for the maybe silly questions, but I truly don't understand, if this is more efficient rifle and can produce more and very consistent shots why would someone now purchase a $2000+ Impact? This rifle IMO is a hybrid of the Wildcat & the Crown with chocolate syrup and a cherry on top.
You forgot the whipped cream! But certainly won't make the Impact obsolete. The Impact is like the high end race car with some very unique adjustments and ability to mod. Maverick and Impact are both pretty much the same power and similar efficiency. Though the double reg on the Maverick is a big step forward. But the Impact isn't going anywhere.
I followed this video and was close to getting where I wanted and now it just degasses when I put the bottle back on. I have no idea what went wrong. I wish I would have read these comments before I tried it, I wouldn't have done it.
Can you clear something up for me ? I thought I heard that the Maverick will work with the Impact barrels ? I understand it’s based on the Wildcat... I just seem to remember hearing in one of the videos on CZcams or Instagram that you could interchange barrels with Impacts. Thanks
@@strokerz507 trato de enviar el correo a fx pero aun no me responden si tienes el correo me lo puedes facilitar por insta al dj plisss @cazapesca_y_mas
@@FXAirguns we dont have a dealer in Georgia Tbilisi. How can i get one? Only way that i see is to order from USA and they have those for pre-order. Waitin for few month and they never got my dreamline bullpup to send me. Is there any way to get it from Sweden? We dont have power regulations but only cal restrictions it must be 4.5
All depends what caliber, length of barrel and at what speed of ammo you want set in max - min on the power wheel. 25-35b between the 2 reg is the recommended setting.
At 2 minutes 55 seconds you backed out the first reg to release air, surely this will adjust the pressure and work you just did to set it. Makes no sense
I don’t understand anything from this action. He sets the first reg at desired pressure and a few seconds later he changes the setting to let all the air out. ????
Hi Ernst when I turn the brass second stage screw (at 2.13 minutes in the video), rather than an internal sound of air movement, I have air escaping from the brass adjusting screw, a bit like a bleed screw. Is this what should be happening? Thanks
Hi , this is Mathias from FX . This isn’t correct. The adjustment screw when backed out to far causes this as the sealing oring gets passed the sealing wall on the inside . Or if you didn’t back out to far the orings on the adjustment screw need replacing . Hope this helps
You're the man Ernest. Thanks to you and the team at FX for your innovation.
Mine should arrive any day. Thanks for the awesome tutorials.
Looking forward to what this gun can do, very impressive so far!
Awesome! Can't wait. Mine ships Friday!
So awesome! Looking forward to reviewing ing mine next week! Please come out with a tuning video for the Maverick as well!
Absolutely, we'll have a tuning Masterclass as well as how to install the Maverick Slug Power Kit
@@FXAirguns Maverick slug power kit? I haven't even got my file yet and your making me want to spend more! Lol! Can't wait for the vids! Thanks
Love these videos, love these airguns, one day ill have a full house and not just my crown :D
Can't wait for the testing!!
Hi Ernest, we need more videos on the Maverick.
Thanks for the info Ernest. Btw Daystate had a dual reg on one of their FT 12ftlb rifles before they went electric. Model name escapes me at the mo possibly CRX.
Great video may I ask what tripod you have in the first part of the video
Ernest when I tried to set the second regulator after setting first to 180 , after bleeding when I turned the set screw the guage never moved . Air was leaking out of the set screw . I bled the system and started over , filling the bottle to 250. No air goes through the plenum. opening set screw on either regulator air leaks out of either set screw . Blown o-rings ?
The reason I adjusted is i bought it brand new and saw that second regulator was reading 120 , so I wanted to set both high and low. 180. 150 . Setting the first to 180 went as if should .Bled , and when i tries to set to 150. the 2nd reg gauge never moved at all .
Can the Reg be switched between 1st and 2nd so the plenum can be a little bit smaller? If i use the .177 call is it just need 80-90 bar?
Thank you I stand to be corrected, thank you
Earnest….
Can you tell me the make and model of the tripod and fixture you are using in this video…. Thankyou
I would like to know if the magazine hinders left-handed shooters and if there is a possibility to invert the magazine. I did a lot of research and didn't find satisfactory answers on the subject. Thank you in advance for your attention.
you are a legend
hi earnest, just to confirm impact barrels will fit maverick?
Goodnight. I'm Ricardo from Portugal and I follow your channel. I want to ask a question because I am going to buy an FX and I need to decide which one: What is the most powerful weapon in joules in Cal.22? Impact or Marverick? Thanks
Hello friend, I'm Ricardo Ávila from Portugal and I follow your channel. I want to ask a question: How many joules of power does FX Marverick give to Cal. 22 and in Cal. 30? Thanks
Ernes what’s your take on the Maverick
Ernest when my bottle is say 200 bar why is it hard to unscrew or screw back in?
When setting first reg, I can't get it above 100 bar 🤷♂️ and further the screw just comes out. What's the issue there? Is European / UK reg version different?
Hi Ernest, watched the video twice. Surely when you open the first reg to bleed the pressure off you altered the setting on it?? Can you clarify this as I've a .25 Compact on order already, many thanks for the great vids by the way.
You open and close it just a mm. Nothing that will effect the relationship to the second reg as the two need to be just in the range of 25-40 BAR difference
Thanks for asking this!
I ASKED THE SAME QUESTION LOL
After watching this video again, I noticed the same thing. I was looking through the comments to see if anyone else caught it. You did and he explained, done deal.
But how do you move that first regulator around so I can adjust it?
Hi Ernie,I'm confuse as you adjusted the first reg to 175 and then you adjusted it again to adjust the second regulator.shouldnt both regs be left untouched once set.help me out please as I've just ordered one thanks my friend.
He is throwing MANY people off doing this!
great vid , ive done this set up on my 30cal , using 50g slugs , but i am getting 3 or 4 good group shots then 4 or 5 flyers that are 2 or 3 inches away , any idea whats happening ?
Hi Mike, we are sorry to hear this is happening please call our customer service/technician department so we can help get your gun up and running as optimally as possible.
Can anyone tell me the make and model of the tripod earnest is using here… thankyou
Love somuch
Ernest--question about my maverick. The final regulator adjust screw is rotated too far towards the top of the rifle. Can't get my normal long hex drivers in there bc the barrel is in the way. Only way I can adjust it is with a stubby end of a hex and turn it about 1/3 of a turn at a time (can't get the hex all the way seated). How does one disassemble to rotate the adjustment screw more towards the side where it's accessible? @FXAirguns
Sorry to hear about the difficulties you are having please feel free to email or phone in to get in touch with our technicians if your experiencing any more troubles. Our email is Serviceusa@fxairguns.com , or call at (866) 639-0772 between 9 am - 4pm EST Monday - Friday.
Regards,
FX Airguns USA
@@FXAirguns thanks for the reply! Emailed support last night with a picture!
Hey Ernest
Since the Maverick is basically a Wildcat action,
I was wondering if FX is thinking about putting 2 regulators on an up coming Wildcat?
Hey Gary, How about putting 2 HUMA power plenums and 2 HUMA regulators in a WC MK3 set at 30-40 bar difference of each other ;)
Second question, can you harm anything by turning the adjustment screws the wrong way while under pressure?
Once you set that first reg then you went back to it to bleed pressure doesn't that now make that reg go up more than the 170 you had it set at because you obviously unscrewed that reg to bleed the pressure so when you tightened it back down to stop bleeding pressure you now are no longer set at 170? please explain how you bled the pressure without changing from 170!
Well, just did this whole thing on my Maverick. I had to twist the first regulator just a tiny bit in order to degas the rifle. On some videos by just dry shooting it bleeds the air, but in my case it was exactly as on this video - no degas happened until I twisted the regulator just a little bit
Hey Ernest, how are you bud? I’ve been told the dual brass transfer port from the Impact are the same and will work in the Maverick, what about the bolt probe? I have a spare I’ve modified and also a spare pin probe for my Impact, will they work in the Maverick? Thanks Stoti
probe design for the Maverick is different than the Impact. There is a pin probe included with the slug power kit
@@FXAirguns Thank you Ernest. Not a big deal, don’t even have my Maverick yet. I just wanted to know if they were compatible. Have a good one and thanks for the reply. Stoti
whats god tune for 22 comact pellets
Trying to learn from you but it’s not working out well on my end. Just not letting air into the regulator. I actually damaged the 2nd regulator because no air will go back into it.
If I want to fire at 110 bar, the other regulator would have to be at 150, if so, could I only fire until I have 150 bar left to maintain the pressure difference?
Preferably Yes, shooting below the regulator pressure of 150 could effect how the regulators interact. For best results if the regulator is set to 150 only shoot down to 150.
How to regulate to full power? (.30 Cal, Netherlands (No Limit))
Muito linda 😍
Why 150 bar for high power with 89cc plenum ?
100-120 are not enough ?
All depends on what you’re shooting. For heavy slugs 120 may not be enough depending on the size and caliber.
How much for one FX air gun you show ?
I accidentally turned my power wheel while cocked it seems to be working fine still? Am I screwed?
Not something to do again but you’ll get away with it this time. You can sleep well my friend. If you can’t, a little melatonin and good to go
@@Ultimatehobbyreviews lol yeah turning it down I think is easier on it. But I won't do it no more
I went to adjust my regs for the 1st time and my second reg is already flush and I feel like if I back it off anymore it’s going to come completely out. What should I do in this case?
If you are in the US, please email or call into FX USA and one of our technicians can help find the best solution for you.
@@FXAirguns I returned the gun to where I bought it. I believe the company I purchased it from sent me someone else’s return.
Please tell me which one to buy maverick or impact and why ❓now I'm puzzle please help me
There is a Q&A on our Instagram FXAIRGUNS_USA , Jon goes over some of the similarities and differences of the maverick and impact.
Impact all the way
you set the front reg at 2:31 then you bleed it but then you Adjust ( bleed ) the front screw doesn't this change the front reg pressure
you're right , after setting reg 1, bleed air, close reg2 reintroduce air ,slowly adjust second reg to desired pressure. aeac vlog is the better guide,
When the man who brought two regulators into reality says, "i've never heard of this" at (0:18) you feel sarcasm all the way. I think this industry owes you a lot @ErnestRowe
Linda de mas essa carabina. Quero uma 🥹🥹🥹🥹🥹🥹🥹🏦🏦🏦
My mavrick does not seem to have the second regulator valve??? why and how? got it yesterday and there is no power limit in my country. have they chnaged the placement of it or??can anyone help..
What country are you in? Have you contacted your retailer?
FX How much does it cost
So there is no gauge for bottle pressure?
no gauge for 1st regulator. the first gauge is for the bottle. ( I think there should be three gauges myself )
Going to buy one of these it's going to be my first air rifle you don't have to be a rocket scientist to set these up do you??
Nope! Dont have to be a rocket scientist 😀, Also, in the U.S. we have a Technician department that can help guide you through any difficulties just call or email in; Monday - Friday!
So is this making the Impact obsolete? Are we gonna see a drastic price drop in the Impacts? Sorry for the maybe silly questions, but I truly don't understand, if this is more efficient rifle and can produce more and very consistent shots why would someone now purchase a $2000+ Impact? This rifle IMO is a hybrid of the Wildcat & the Crown with chocolate syrup and a cherry on top.
You forgot the whipped cream! But certainly won't make the Impact obsolete. The Impact is like the high end race car with some very unique adjustments and ability to mod. Maverick and Impact are both pretty much the same power and similar efficiency. Though the double reg on the Maverick is a big step forward. But the Impact isn't going anywhere.
@@FXAirguns Create another regulator for Impact on the bottle !
Want to buy one maverick for left handed
I followed this video and was close to getting where I wanted and now it just degasses when I put the bottle back on. I have no idea what went wrong. I wish I would have read these comments before I tried it, I wouldn't have done it.
Can you clear something up for me ?
I thought I heard that the Maverick will work with the Impact barrels ?
I understand it’s based on the Wildcat... I just seem to remember hearing in one of the videos on CZcams or Instagram that you could interchange barrels with Impacts.
Thanks
Impact uses the same barrel as the Maverick, but the shroud is different.
My Maverick shooting very law 155/130 I’m getting 750 fps jsb 18.13
I followed your video and 4 others and still my Fx is at 0. The regulator will not take in air.
Maybe maybe even regulated airguns have a sweet spot.........
Please put assembly and disassemble video
Can the maverick be left handed
Want to buy one maverick for left-handed
There isn’t a dedicated lefthanded Maverick, Sorry
Someone can make it easier for me to direct contact with fx I'm from panama and I need this
Entra a la pagina de fx usa alli esta el contacto del representante de fx en panama alvaro chong
@@strokerz507 trato de enviar el correo a fx pero aun no me responden si tienes el correo me lo puedes facilitar por insta al dj plisss @cazapesca_y_mas
🇻🇳😍
Why isn’t it tuned from the factory?
It is. This shows Ernest taking it from the factory tune to high pressure for some heavy slugs
Ok so how much preasure must be in first reg?
First reg should be set 30-40 BAR higher than the second reg
@@FXAirguns thank you :)
@@FXAirguns we dont have a dealer in Georgia Tbilisi. How can i get one? Only way that i see is to order from USA and they have those for pre-order. Waitin for few month and they never got my dreamline bullpup to send me. Is there any way to get it from Sweden? We dont have power regulations but only cal restrictions it must be 4.5
@@FXAirguns contacted luftvapen store they said they cant send one
All depends what caliber, length of barrel and at what speed of ammo you want set in max - min on the power wheel. 25-35b between the 2 reg is the recommended setting.
What if you have dual Huma regs how do you release the air from the plenums?
easy enough
LIKE quanto custa $$$$
Starting at 1399.99 USD
I gotta question, how come Ernest gets a 580cc/600mm combo?. :-)
little odds, as one of the worlds 800 million left handed people, I will tap out.
Kyk orang Indonesia 🤔
Very confusing 😢
Mirif orang indonesian pak
For the price,unle
At 2 minutes 55 seconds you backed out the first reg to release air, surely this will adjust the pressure and work you just did to set it. Makes no sense
I don’t understand anything from this action. He sets the first reg at desired pressure and a few seconds later he changes the setting to let all the air out.
????
You are doing things you are not explaining
Don't buy this scam! It's a waste of money!
Hi Ernst when I turn the brass second stage screw (at 2.13 minutes in the video), rather than an internal sound of air movement, I have air escaping from the brass adjusting screw, a bit like a bleed screw. Is this what should be happening? Thanks
Hi , this is Mathias from FX . This isn’t correct. The adjustment screw when backed out to far causes this as the sealing oring gets passed the sealing wall on the inside . Or if you didn’t back out to far the orings on the adjustment screw need replacing . Hope this helps
Much appreciated Mathias @@FXAirguns can you confirm O ring size for replacement
@@physiofarmer that will be 2x1 nbr90
Thank you@@FXAirguns. Procedure to replace is to screw out fully the screw, replace both seals and screw in just below flush?
@@physiofarmer yes but make sure you complete drain the system from air before taking the adjustment screw out