How to make Multipurpose liquid soap 2023 / chemical functions and uses / 30 liters production
Vložit
- čas přidán 10. 08. 2023
- How to make multipurpose liquid soap
How to make 30 liters of liquid soap.
• How to make Multipurpo...
---------------
How to thicken watery liquid soap . Part 1.
• How to thicken liquid ...
----------------
How to thicken a watery liquid soap part 2
• How to make watery liq...
----------------
How to thicken a watery liquid soap , Part 3
• How to thicken a water...
#howtomakeliquidsoap #laundrysoap #liquidsoap #soapers #multipurposeliquidsoap #texapon #sles #youtuber #howtomake30litersofliquidsoap#howtomake30litersofsoap#howtothickenawateryliquidsoap#howtothickenliquidsoap#howtomakeliquidsoapthicker#youtubelearning#skillsbybamglam#bamglamvideos#liquidsoapcourse#howtomakegoodandfoamjngloquidsoap#qualityliquidsoap#liquidsoapmaker#liquidsoapviral#allyouneedtoknowaboutliquidsoap#liquiddetergent#multipurposeliquidsoap #foamingliquidsoap#wateryliquidsoap#wualityliquidsoap
What i realised about all her soap production is that they are all cleared and transparent including the multipurpose. Which amazes me
Thanks
❤
Ur liquid soap is so beautiful just like u😘. But Can i pls replace the nitrosol with salt if I dont have nitrosol?
@@sarahtwumbarimah8264 the texapon is not enough to hold salt . Salt preparation are verrrry different
Oh ok, thank you. Hope u will one day teach us about the salt preparation too.
Sensational
Good one
Nice 👍
Thanks for sharing knowledge
My pleasure
Thanks so much
Thank you, ive learnt a whole lot . New sub here . Keep up the good work ! You really know what your doing, well done!
Thanks mama
Thanks so much ma❤
Please what is the measurement for the preservatives. Thank you
Can you use a mixer to speed up the work?
Se puede reemplazar el sttp por metasilicato de sodio
How do you derive your own measurement
Great teacher
Thanks
Please where to get all this ingredients
Let me know the chemical name of foaming booster
Hi,
I appreciate the value derived from your video content.
I would like to know which specific ingredient you used in this production that makes it unsuitable for use in washing cars.
Are there alternative ingredients that are safe for car paint?
Can the mentioned ingredient be omitted entirely without compromising the end result's quality?
I would greatly appreciate your response.
Thank you, and keep up the good work.
Car washes Ph fall at ph 7 flat
And any production with caustic soda and can weaken car paint with time or fade itZ even though people sell it to car users. But with time they wont buy ur product again.
Car formula are different. If u wnat a special formulation . Thats what i do. U send me a whatspap message, we talk on the fee. Once is closed. I make u a formula and you enter production. Is simple
Good Day mam how can i join your class thank you
❤❤
Thank you my dear for sharing can one prepare liquid soap without adding cuastic soda
Yessssss
So we can't use it to wash car
Hello really helping video which grade hec are u using
Madam what is the name of foaming booster that you used in liquid soap makiing.
Just the local foam booster. There are varieties
Thanks for the knowledge share.please what is the measurement for SLS,Soda ash,Stpp and caustic soda? thanks i await your response God bless
It just mean u didnt watch the video. Because if u did u wouldn’t have asked that. All the measurements where listed as i introduce them with theree actual measurements.
❤
Carry ur pen and paper and watch the video again
This is super
Thanks bless
Dis amazing
Thanks
Can this be used for Laundry?
I need to know whether the foam booster is same as CAPB(Betaine)?
U can use it is ok
I wonder how your natrosol dissove easily
Seems they have been selling local natrosol for u which is starch.
PAcR cant dissolve easily
Antisol takes two days to dissolve
But original natrosol is instant.
Check ur vendor again.
Pls is it good to use salt to do liquid soap
Very good
How can you make it shiny or glossy like morning fresh
I have a class on store bought grade liquid detergent is 10k naira . Send a whatsapp to get all u need.
I like how you are using chemistry background to explain your production processes, thank you and God bless you. I want to join the WhatsApp group, kindly send me the link I can't get here
Chat me up on WhatsApp +2347080908992
@@Bamgfoodsdiy6:23
Pls My liquid soap usually has white substance settled under it after some days, please what might be the cause and how can I stop it permanently?
U are definitely not mixing well. Till u learn to mix each components properly very wel for atleast 10mins.
Pls i want to ask a question, is it necessary to leave solution for 24hrs or less after production? I saw it in a video that's why am asking, i wanted to be sure
Nit really dear. Just let the foam bubbles settlesettle before you package
Alright, thanks
unless u hve your own fast cooling system ,ok
Beautiful!
I have a problem with my formula. My liquid soap never turns clear, what could be the problem?
What is ur recipe
@@Bamgfoodsdiy can I send you private message through WhatsApp or here? To discuss more about it. It’s very similar to yours but at different amount (%) same ingredients
@@Bamgfoodsdiysame with mine. For 60 liters I use
Nitrosol 250g
Caustic soda 100g
Texapon 250g
Sulphonic acid 1.75cl
Soda ash 1kg
STPP 500g
SLS. 260g
Foam booster 500ml
Fragrance. 50ml
Colour
How to correct cloudy liquid soap after adding fregrance.most of the fregrance turn the liquid soap cloudy..response appreciated
The fragrance is much. The soap has emulsified the fragrance oil. Just like when u add soap to an oily plate same thing occures.
U cant correct already cloudy soap.
But u can prevent it from happening again.
Fragrance should not exceed 2 ml per liter production.
U must have added toooooo much to notice cloudiness
How do you derive your own measurement
How do you derive your own measurement
As a Chemical formulator. I draft recipe. Work on it in different %tages till i achieve a stable product for the public. Before i put out the video. I also make sure i work with in the usage rate of each component or even lower and not above. All these information are there for me and you. All you need to do is read and research more on each chemical extensively and try them out. So i dont copy formula i make mine. So if anything goes wrong in ur production, at one look i should be able to dictate the problem and solve it. Cause is my own recipe