Frigidaire Refrigerator Replace Evaporator Fan Motor 241509402
Vložit
- čas přidán 11. 09. 2024
- Buy part 241509402 now: www.repairclin...
This video provides step-by-step repair instructions for replacing the evaporator fan motor on a Frigidaire refrigerator. The most common reason for replacing the motor is if the refrigerator is not cooling properly.
Additional refrigerator repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website:
www.repairclini...
All of the information for this refrigerator fan motor replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 3/8" socket, phillips head screwdriver, #2 square driver kit
Buy part #181CB now: www.repairclin...
Buy part #38054 now: www.repairclin...
You can find printable step-by-step instructions here: www.repairclin...
Model displayed: Frigidaire Refrigerator FGHB2866PFGA
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Check out our blog: www.DIY.RepairC...
Don't forget to like and comment on this video, and subscribe to our channel!
You guys make the BEST tutorials. No unnecessary fluff, well-filmed, and very detailed. THANK YOU!
few years back you guys helped me replace the thermal fuse on my dryer, of course im going to see if you can help me with my fridge error code!!! I really appreciate this channel!! Thank You, Thank you!!!
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Very well done, filmed very quickly with well-lit pieces. Nice, clean repair video. Wish all could be this good.
Once upon a time Frigidaire built products that lasted. Today nothing, but failure prone rubbish.
I tested the old fan motor (and the replacement) by using a drill battery that puts out about 12 volts. I connected the positive to red and also yellow by using a jumper. The negative connected to brown. The old fan didn't move, but the housing got warm. The new motor started spinning. We had a similar model Electrolux to this video, so almost everything was the same. The video was a great help.
Very helpful step by step instructions. You guys are the best!
Just what I needed! Fridge is nice and cold again
just curious what exactly your problem/symptoms were before you replaced this fan.
i.e. what exactly happens when the fan doesnt work.
does the freezer not get cold? or the fridge? or both? etc
@@nolanritchie9761 freezer was still cold but fridge was not
Good video I liked the straight forward instructions
Very very nice and informative video good job done,
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
Help! I followed directions precisely and when I went to plug in new fan the plug wouldn't press down far enough to catch. It's like the metal prongs are too heavy of gauge. Double checked part number on fan - correct. Probably something stupid so be gentle...
Amazing thank you
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
The video doesn't show this step, so don't forget to re-connect the ice-maker connector before re-attaching the evaporator fan cover!
Excellent just what I needed 👍👍👍👍
Clear as Crystal. 👍🏽
How do you know it this is the issue
Thanks so much for the awesome video!!! Took me longer then it should have but a great video!
The video didn't show removal or re-install of ice maker.
HINT: Once motor is replaced and mounted, plug in and make sure the fan is running before you put it back together.
Whi and was a
Uv9 I 2óobncóvvbb huh ubbuuu hub vb Gee Hu buy6
By CB bb83. E3w. BB Bn uv cf gybbbi888b8ßvyvbvsv, Nv u
B
Ú Hi as
Regarding a Frigdaire glhs36eesb0 side by side... It is cooling fine. Freezer is cold. But recently the Evaporator Fan has started running all the time. I suspect some little sensor has gone bad??? What controls turning on and off the fan in the Freezer?
Thank you so much, I
Thank you for making this video!!!!!!
my fan has 3 wires red/yellow/brown in a row. The same part no. same looking motor I find connectors that have 4 wires, in a double row????
the yellow ,blue and white wires how can I wire it up for a fan for something diff. ????
testing our grand to the plate before changing the fan
My Frigidaire Frig (Model: FGHB2844LF3) has an SY EF error. I've replace the evap fan/motor and control board. Yet, the error still remains. Could it be a thermistor (PN# 5303918416) or refrigerator sensor (pn# PP8992304X61-X3)? Sometimes I'll hear a noise that sounds like ice falling falling inside of the freezer, but there's no ice build up on examination. What could be the problem? Can you help point me in the right direction please? I'm almost to the point of just throwing it away and getting another frig.
My fan isn't coming on. I'm looking for a way to put the refrigerator in evap fan test mode to make sure I dont have a bad fan motor. I dont want to replace both parts as you did and it not fix the problem.
Did you find any solution im on same problem with you
Following
I have a Frigidaire FGHB2844LF7 and my evap fan is not spinning getting the SY EF on display. I already replaced the fan motor which didn't help. Any suggestions?
Minds doing that now I h think it’s the control board
Is this a Gallery model ?
testing our ground no rust before ghangin our fan motor
I replaced my fan motor and it still doesn't work.
check your ground plate not rust before switch our fan motor
Should I purchase a new fan also when doing this repair?
lol what do you think
@@andrewpersaud4144 turned out to be a control board and thermostat issue. Running great now.
verifier la mise a terre avant de changer le ventilateur pas de rouile