2024 KLX 300 Replacing the Mirrors | Double Take Mirrors | Better than Stock?
Vložit
- čas přidán 13. 09. 2024
- The stock KLX 300 mirrors were disappointing. I replaced the 2024 KLX mirrors with double take mirrors. Double Take Mirrors are really convenient for Dual Sport Motrorcycles.
Below are links to the parts and accessories I have used on my KLX 300
KLX Parts List:
IMS Super Stock Pegs
amzn.to/48X0hKp
Adjustable Brake Lever
amzn.to/48QE8gP
Tusk Shift Lever
amzn.to/43iR0LB
LONGER IMS Shift Lever
amzn.to/43gO3er
Pro Taper Handle Bars
amzn.to/3Th2rie
Acerbis Handguards
amzn.to/3wRKKOU
Pro Taper Grips
amzn.to/3IzHY3p
Double Take Adventure Mirrors
amzn.to/43cTpr4
Handlebar Risers
amzn.to/3Pe4rqA
Throttle Tube
amzn.to/3wNx9YJ
Sunstar 13 T Front Sprocket
www.motosport....
Front Shock Springs
racetech.com
Rear Shock Spring
www.motocd.com...
Helpful Tools
Tusk Cartridge Holder
amzn.to/3v6sbWK
Socket Set
amzn.to/3v9b5HG
Metric Wrench Set
amzn.to/3v9b0Uo
Renthal Grip Glue
amzn.to/3TxK4Hg
Contact Cleaner
www.rockymount...
Shock Spanner Wrench
www.motosport....[MOP002S]=MOP002S-X001-Y001
Shock Spanner Punch
amzn.to/3vaaWnu
Fork Oil Level Tool
amzn.to/3IAonjK
Motion Pro Damper Rod Bleed Tool
amzn.to/48LUPu0
Accessories
Chain Wax
amzn.to/43gOOnT
Locktite
amzn.to/4a1dcwc
Tusk Lift Stand
amzn.to/3veyJT2
I have those on my KLR. Previous owner put them on and I can see they're very popular and people love em. Visibility is awesome.
Did you do a video showing how you installed Acerbis Hand guards? Also are you using the stock handle bars with those?
I didn’t make a video of the Acerbis install. These are not stock bars they are pro taper cr high bend.
www.rockymountainatvmc.com/parts/protaper-se-7-8%22-handlebar-p?s=47747
@@DerekDualSport was the installation of acerbis easier on those? From what I’ve seen, the installation on stock bars involves drilling out the aluminum bars and tapping them. Plus the clutch lever and everything have to be re-arranged. Kind of a big ordeal
I thought the installation on the pro tapers were pretty straight forward. I did have to trim the clutch lever, and there is two plastic tabs that I had to cut off. One inside of the blinker/light mount and one in the mount that houses the throttle cable.
These Double Take mirrors look like a must, not really liking the bug antenna look of the stock mirrors. Also the clunky, oversized rear fender eventually has to go. The TST Industries replacement looks great, very minimal, will pick that up soon. I'd like to replace the front fender with more of a dirt look as well, however the stock front is not that bad. Foot pegs, skid plate, rack & black gas can, were the first things I did. May get the longer shift lever as well, since the wider foot pegs changed the feel. Adjusted the shift lever, which helped, but I thing the longer one will serve better.
Hey Derek what are you going to do about that big long tail rear fender??
I think TST makes the cleanest tail tidy. One day I’ll probably buy the kit but for now I’m keeping it as is.
What camera are u using for the pov in the shed
It’s the insta 360 go 3 it comes with a hat clip mount, makes POV super easy.
ฉันอยู่ประเทศไทยและกำลังรอรถคันนี้เข้าไทยอยู่ ฉันจะติดตามคุณตลอดไป
Double take mirrors are basically the standard for any offroad MC.
Makes sense, they are super convenient. Mirrors were the last thing I thought about when buying a dual sport. The stock ones were terrible though 😂
@@DerekDualSport Mirrors, footpegs, handlebars, handgrips, levers, tires are all expected to be replaced (especially on budget bikes) so the factory throws cheap stuff on there just good enough to sell it as a complete bike. The real concern with mirrors on off road bikes, is stripping the mount treads. Double take addresses that issue.
They dont last
The ball mounts they give you are trash
I did notice mine have become slightly warped.