How To Make 1/24 Dually Beadlocks! SCX24 C10 Gets Some New Shoes!

Sdílet
Vložit
  • čas přidán 28. 01. 2021
  • Go to 9:50 if you want to skip assembling a beadlock wheel and go straight to the Dually build!
    Finally making the dually beadlocks work! Showing you how to install your tires onto the beadlocks as well as how to make the hardware needed for the dually build! Down below is all the parts I used to make this set up work. I am so happy with how it turned out, hope this helps you make your own custom dually rig!
    RC4WD Stamped Beadlocks:
    store.rc4wd.com/Stamped-Steel...
    RC4WD Classic 8 Hole Beadlocks:
    store.rc4wd.com/RC4WD-Classic...
    RC4WD BFGoodrich T/A KR3 Tires:
    store.rc4wd.com/BFGoodrich-TA...
    M2 Brass Hex Coupler:
    www.amazon.com/dp/B07B9X1KY6/...
  • Zábava

Komentáře • 80

  • @wise--men
    @wise--men Před 2 lety +1

    Splendid! Splendid! Splendid!!!!!

  • @colbyhann1808
    @colbyhann1808 Před 9 měsíci +2

    thanks man i seen a dually set on ali express and came across your video! now i just ordered the hex couplers!! love the ingenuity!! cause i got plenty of wheels and what not!!

  • @thatoneguyyouthought
    @thatoneguyyouthought Před 2 lety +2

    Doing this mod to the new Gladiator. So glad I found this video, I didn't want to do gluing on a printed rim.

  • @user-df3cs6te7r
    @user-df3cs6te7r Před měsícem

    great freaking idea. Thank You ❤🎉😊

  • @georgivoyvodov1123
    @georgivoyvodov1123 Před 10 měsíci

    Nice video mate. But I think this mod is just for fun in the workshop. So wide rear tires does not add any increase of the climbing abilities of the rig ( personal experience ) The crawler turns to a monster truck smasher. I've experimented with tons of wheels an tires : wider, more wider and finaly reach the conclusion that thee best for climbing are more narrow tires with supa soft texture for more grip . No huge graifers or smooth slickers.

  • @andrewrichey7374
    @andrewrichey7374 Před 3 lety +1

    That is super cool, appreciate you showing how to, looking awesome

  • @timberridgerc
    @timberridgerc Před 2 lety

    Tip: the milestar Patagonia tires are really awesone

  • @think2cre81
    @think2cre81 Před 2 lety +1

    Looks great 👍

  • @digmoe6463
    @digmoe6463 Před 3 lety +1

    Thank you dude!! Finally!

  • @tcchatterton9184
    @tcchatterton9184 Před 3 lety +1

    Another way is to use a Dremel to hollow out the center of one wheel and then hot glue or superglue the wheel and tire together and now you have access to your Bolt with duallys 👍

    • @rcrewired1220
      @rcrewired1220  Před 3 lety

      True but then they are glued wheels, the point of this was to be able to use independent metal beadlocks, that you could re-use in the future

    • @tcchatterton9184
      @tcchatterton9184 Před 3 lety +2

      @@rcrewired1220 you can get the hot glue apart and still use beadlocks just another idea if you don't have the hardware for everyone out there

  • @NWflyonly
    @NWflyonly Před 3 lety +1

    Looks awesome! Thanks for the "how to" that was great!

  • @RC-CARS-WORLD
    @RC-CARS-WORLD Před 3 lety +1

    Awesome video my rc friend 👍😀

    • @rcrewired1220
      @rcrewired1220  Před 3 lety

      Thank you so much, been really excited for this one!

  • @divielreyes1374
    @divielreyes1374 Před 3 lety +1

    It looks fricken great

    • @rcrewired1220
      @rcrewired1220  Před 3 lety +1

      Hey thank you so much! I have been really enjoying this build!

  • @alanq64
    @alanq64 Před rokem

    Just an FYI, if you have an FMS K10 (Apache, Magnum, etc..) and want to make a dually you need to use M2.5 hex couplers.

  • @squirrelman_rc567
    @squirrelman_rc567 Před 3 lety +1

    well done!! this is a great idea

  • @wudaniel6846
    @wudaniel6846 Před 2 lety +1

    Where I can buy the copper pillar? on the video 12:37, the parts on your left hand. can I have more clear photo for this parts? how to install the hex on the cooper pillar? thanks.

  • @STP_RIDGELINE
    @STP_RIDGELINE Před 2 lety +2

    Great vid awesome build mi familia 👍
    I subscribed 🙏🏼👍👊❤💯

  • @fredo7482
    @fredo7482 Před 2 lety +1

    I'm not using beadlocks can this work with the stock wheels and tires I want to dually all 4 tires

  • @connerhansen9372
    @connerhansen9372 Před 2 lety +1

    What was the old setup I like it

  • @DblAGamesAndOutdoors
    @DblAGamesAndOutdoors Před 2 lety +1

    Awesome looking truck! If you don’t mind me asking as long as I have that m2 coupler assortment I should be able to get the dual rear wheel set up with any bead lock rims right? Like possibly just have to do a different combo of extensions, what’s your opinion I have injora beadlocks by the way

  • @edcurtis8909
    @edcurtis8909 Před rokem

    Where did ya get that long deep wrench for wheel nuts? Looks handy.

  • @carlievale1485
    @carlievale1485 Před 2 lety

    that rig looks awesome! i have a deadbolt but love your rig and want to get the c10 and build it into a recovery rig.i just bought milestar patagonias. i took out the foams so they are super soft. are the bfgoodrich tires soft?

  • @nortran11
    @nortran11 Před 3 lety +1

    We've got to get you up to Everett to try that dually out on our course.

    • @rcrewired1220
      @rcrewired1220  Před 3 lety

      Eeeeyy trust me I've been thinking about that course, might have to shoot an episode there!

  • @derekhamilton4399
    @derekhamilton4399 Před 6 měsíci

    Where did you get the flatbed

  • @colbyhann1808
    @colbyhann1808 Před 9 měsíci

    Hey where did you get the old wheels you have on your rig i like them the most they look like a real dually lol

  • @anthonyrojas9791
    @anthonyrojas9791 Před 3 lety +4

    Where did you get the rear bed assembly for your rig?? It’s super sick 👍🏽

  • @jnunez626
    @jnunez626 Před 3 lety +1

    Two questions. The medium hex cuppler is the one glued Into the black plastic hex correct? And which glue did you use to glue the black plastic hex to the cuppler?

    • @rcrewired1220
      @rcrewired1220  Před 3 lety +1

      Yes, and I used 5min 2 part epoxy for glue.

  • @rogueart7706
    @rogueart7706 Před 2 lety

    That is a fricken cool upgrade. I love guys that think outside the box.
    I won’t do this to mine, I have different plans, but kudos to this beautiful truck.

  • @mikaldixon830
    @mikaldixon830 Před 3 lety +1

    I found a set of barley used stingers in canada but can't find any online.

    • @rcrewired1220
      @rcrewired1220  Před 3 lety

      Yeah, unfortunately all aftermarket parts for these things have been difficult to get lately.

  • @jtmchannel7640
    @jtmchannel7640 Před 3 lety +1

    Hey, great video and rig! I have a question-
    How are those BF Goodrich tires? How do they size up to the stock tires on the C10? I’m looking for a rc4wd tire that is about the same height as stock.
    Is there any chance those could fit on the stock plastic wheels?
    Thank you for your time.

    • @rcrewired1220
      @rcrewired1220  Před 3 lety +1

      They are pretty awesome, the km3 are just as you describe but they are wider than the stock tires. I really like them, though they don't fit on stock rims, you'll need beadlocks for them to work.

    • @jtmchannel7640
      @jtmchannel7640 Před 3 lety +1

      @@rcrewired1220 That’s what I figured. Also thanks for clarifying that the wheel weights work with the stamped steelies. 👍

    • @rcrewired1220
      @rcrewired1220  Před 3 lety

      Anytime! 👍

    • @cyclecats
      @cyclecats Před 3 lety +1

      I have a set of these glued onto stock C10 rims. They balloon a bit, and I wish I would've trimmed a lot more off the foams, or left them out. Careful gluing, one side at a time got them pretty straight. The BFG tires are a good couple mm taller than the c10 tires, and way more grip.

    • @jtmchannel7640
      @jtmchannel7640 Před 3 lety

      @@cyclecats Hmm, Interesting! I have never thought of it as a problem gluing rc4wd tires to the stock rims, because I have wheel weights on them.
      Thanks!

  • @bigboyluke9766
    @bigboyluke9766 Před 3 lety +1

    Where did you get the wheel nut extension from?

  • @bettysmith6035
    @bettysmith6035 Před rokem

    I like this mod. I'm about the build the "B17 Betty" over my Deadbolt, I think the dually mod will look great on the new build

  • @the_car_guy5915
    @the_car_guy5915 Před 2 lety

    This but with portal axles

  • @aeQuator
    @aeQuator Před 3 lety

    very cool idea, but i think this will be a temp solution as the weight of the truck, will bend it or even break it..

    • @rcrewired1220
      @rcrewired1220  Před 3 lety

      Been running it for some time now, haven't bent or broken anything. Thanks for your concern though. Maybe try it yourself?

    • @aeQuator
      @aeQuator Před 3 lety

      @@rcrewired1220 thats good to know, i'll 100% try it out..did you planing on installing a brushless system onto this truck? would be coold to see how it performes in terms of low end traction.

  • @oddguy2829
    @oddguy2829 Před 3 lety +1

    That's awesome :). I do have a 6x6 scx24 truck build compiling in my brain right now. Maybe i'll implement this for twin dually in the rear :).
    This idea is getting expensive... XD. haha.

    • @rcrewired1220
      @rcrewired1220  Před 3 lety

      All the ideas are expensive for these mini trucks! Hahaha 6x6 with dually rears would be sweet!

    • @oddguy2829
      @oddguy2829 Před 3 lety +1

      I did it :). The performance is unreal!!. Waiting for better weather so i can try it outside. Thank you for the dually inspiration. It really made the truck look nice :).
      I had to use a FMS Atlas body tho. Only thing available in my part of the world. Looks great, but not custom :P.

    • @rcrewired1220
      @rcrewired1220  Před 3 lety

      Oh man amazing! Have an insta or somewhere you've posted it? Would love to see how that badass thing looks!

    • @rcrewired1220
      @rcrewired1220  Před 3 lety

      If you have one PM me @rcrewired on Instagram!

    • @oddguy2829
      @oddguy2829 Před 3 lety +1

      I don't have any social media but I uploaded a video for you. Sry for not using your design on the dually. But is was 100% inspired by your video :).

  • @CHAINZ2452
    @CHAINZ2452 Před 2 lety +1

    Sir look at you left rear outer tire its not straight

    • @rcrewired1220
      @rcrewired1220  Před 2 lety

      Close enough! I truly don't care 😂

    • @CHAINZ2452
      @CHAINZ2452 Před 2 lety +1

      Ok just letting you know so if you didn't know it was not straight and you wanted it to be.Love the video BTW

    • @rcrewired1220
      @rcrewired1220  Před 2 lety

      Nah I've made them over a few times since the vid. Appreciate the heads up though.

  • @the_car_guy5915
    @the_car_guy5915 Před 3 lety

    It's a ton cheaper to buy the 3d printed ones on Etsy

    • @rcrewired1220
      @rcrewired1220  Před 2 lety

      Doesn't look as nice, had them, checked them, built my own.