ULTIMATE FREE LORA Training In Stable Diffusion! Less Than 7GB VRAM!

Sdílet
Vložit
  • čas přidán 2. 02. 2023
  • LORA is a fantastic and pretty recent way of training a subject using your own images for stable diffusion. Say goodbye to expensive VRAM requirements and hello to this innovative new way of fine-tuning! In this video I will show you how to train a LORA weight using the kohya ss GUI with less than 7GB of VRAM and how you can then use those LORA weights inside stable diffusion!
    Did you manage to train a LORA weight? Let me know in the comments!
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    SOCIAL MEDIA LINKS!
    ✨ Support my work on Patreon: / aitrepreneur
    ⚔️ Join the Discord server: bit.ly/aitdiscord
    🧠 My Second Channel THE MAKER LAIR: bit.ly/themakerlair
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    Runpod: bit.ly/runpodAi
    Kohya GUI: github.com/bmaltais/kohya_ss
    CUDNN 8.6 mega link: mega.nz/file/bZdAnAKa#BidEndl...
    Basic settings .JSON file: mega.nz/file/ndFRwTIB#-T-6AKX...
    Low Vram settings .JSON file: mega.nz/file/zFNjlJAL#uB2uTAv...
    Big thank you to SPYBG for his cool tricks:
    / @spybgtoolkit
    Big thank to Bernard Maltais for his LORA videos and GUI:
    / @bernardmaltais
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    ►► My PC & Favorite Gear:
    i9-12900K: amzn.to/3L03tLG
    RTX 3090 Gigabyte Vision OC : amzn.to/40ANaue
    SAMSUNG 980 PRO SSD 2TB PCIe NVMe: amzn.to/3oBR0WO
    Kingston FURY Beast 64GB 3200MHz DDR4 : amzn.to/3osdZ6z
    iCUE 4000X - White: amzn.to/40y9BAk
    ASRock Z690 DDR4 : amzn.to/3Amcxph
    Corsair RM850 - White : amzn.to/3NbXlm2
    Corsair iCUE SP120 : amzn.to/43WR9nW
    Noctua NH-D15 chromax.Black : amzn.to/3H7qQSa
    EDUP PCIe WiFi 6E Card Bluetooth : amzn.to/40t5Lsk
    Recording Gear:
    Rode PodMic : amzn.to/43ZvYlm
    Rode AI-1 USB Audio Interface : amzn.to/3N6ybFk
    Rode WS2 Microphone Pop Filter : amzn.to/3oIo9Qw
    Elgato Wave Mic Arm : amzn.to/3LosH7D
    Stagg XLR Cable - Black - 6M : amzn.to/3L5Fuue
    FetHead Microphone Preamp : amzn.to/41TWQ4o
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    Special thanks to Royal Emperor:
    - BSM
    Thank you so much for your support on Patreon! You are truly a glory to behold! Your generosity is immense, and it means the world to me. Thank you for helping me keep the lights on and the content flowing. Thank you very much!
    #stablediffusion #lora #stablediffusiontutorial
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
    WATCH MY MOST POPULAR VIDEOS:
    RECOMMENDED WATCHING - My "Stable Diffusion" Playlist:
    ►► bit.ly/stablediffusion
    RECOMMENDED WATCHING - My "Tutorial" Playlist:
    ►► bit.ly/TuTPlaylist
    Disclosure: Bear in mind that some of the links in this post are affiliate links and if you go through them to make a purchase I will earn a commission. Keep in mind that I link these companies and their products because of their quality and not because of the commission I receive from your purchases. The decision is yours, and whether or not you decide to buy something is completely up to you.

Komentáře • 1,1K

  • @gamingthunder6305
    @gamingthunder6305 Před rokem +143

    could you make a tutorial how to train a style?

  • @aaronhhill
    @aaronhhill Před rokem +37

    I literally JUST asked some of the guys in the Stable Diffusion Reddit how to train a Lora and figured I'd check here to see if there was a video, and as usual you do not disappoint. My hats off to you, good sir! Thanks again for all your hard work!!!!

  • @LuizHenriqueMiranda
    @LuizHenriqueMiranda Před rokem +110

    I generated a LoRA model in 12 minutes with my 3060Ti (8GB VRAM) using 30 images and the Basic Settings config file. Just had to adjust "Mixed Precision" and "Save Precision" to "FP16" instead of "BF16" and select "AdamW" in the "Optimizer" dropdown instead of "AdamW8bit".
    Thanks Aitrepeneur for this tutorial and all other tutorials you have made. They were very helpful to me. Much appreciated!

    • @ssajmon83
      @ssajmon83 Před rokem +7

      I had the problem "returned non-zero exit status 1" Your changes solved the problem ;)

    • @wangchi_
      @wangchi_ Před rokem

      this worked for me as well - thanks!

    • @The_Harsh_Truth
      @The_Harsh_Truth Před rokem +1

      Thanks. I was wondering if my Rtx 3060ti could handle it. Now I will try it too.

    • @AdnyanaPriatna
      @AdnyanaPriatna Před rokem +1

      thx, but in my pc its give me adamW errors, so i disabled it and now it works.
      im using 2060 super

    • @Bookedtuyo
      @Bookedtuyo Před rokem +1

      this worked for me too! Thank you! but I have a few question, what is the difference? better training results? it is faster? because I still don't notice a difference

  • @Dragon211
    @Dragon211 Před 9 měsíci +13

    I can't believe how easy it is to make your own lora. I've wanted to generate images of lesser known characters for months now but no loras existed because they aren't popular enough, thank you for this.

  • @legend_of_ray
    @legend_of_ray Před rokem +5

    This is great! Thanks for keeping us up to date on these things. I honestly prefer having the training separate from my stable diffusion installation. Very easy to follow tutorial. I know the work it takes for these video's, much appreciated.

  • @brynbulloch
    @brynbulloch Před rokem +201

    I don't know what it is, but something about the way you explain things quickly but with such great detail is exactly perfect. I'm a little older than the rest of you guys, but I am able to (pretty much) keep up with the new methods and tools for SD thanks primarily to THIS channel. My 16 y.o. grandson now calls ME with SD questions. Thank you, Aitrepreneur. You are very much appreciated!

    • @artavenuebln
      @artavenuebln Před rokem +10

      same same. He explains just so well and doesnt leave out steps, other people assume you "just know"

    • @aaronhhill
      @aaronhhill Před rokem +4

      I wish my grandson was old enough to come to me with questions about SD!! I can't wait until he's old enough to understand art, I plan on teaching him everything I know. He'll be 5 this year.

    • @warsin8641
      @warsin8641 Před rokem +3

      ikr it's way better than reading tbh

    • @Utoko
      @Utoko Před rokem +5

      @@aaronhhill I mean there is a lot "for now knowledge", the field is moving so fast. In 1 year most of the "how you do this" stuff will be way different and easier.

    • @aaronhhill
      @aaronhhill Před rokem +1

      @@Utoko This is very true. I mean, most of the core principles may remain, and obviously the core principles of art will stay the same: perspective, composition, style, but yes the way things are done now will be very different in a year and far easier. My hope is that diffusion will change or become something radically different in the same way that GAN and Diffusion are different.

  • @Aitrepreneur
    @Aitrepreneur  Před rokem +74

    HELLO HUMANS! Thank you for watching & do NOT forget to LIKE and SUBSCRIBE For More Ai Updates. Thx

    • @jpgamestudio
      @jpgamestudio Před rokem +3

      牛逼!

    • @BernardMaltais
      @BernardMaltais Před rokem +5

      A few tips. No need to install the additional network extension if you use the built-in auto1111 LoRA support... but the extension does bring up a nice set of tools you can use to augment the experience. Another one, I suggest to leave the bucketing option always turned on. If you use pre cropped images it will not touch them... but if inadvertently you have one with size, say 512x513... instead of failing to run, it will just resize it to 512x512 and keep going. Don't ask me why I know ;-)

    • @sv_gravity
      @sv_gravity Před rokem +3

      No one is doing style training tutorials and tutorials focused on how to do annotations of images for different type of image content. Please do one, if you know acually how to do it properly. Ty.

    • @sv_gravity
      @sv_gravity Před rokem

      @@BernardMaltais Why you know?

    • @BernardMaltais
      @BernardMaltais Před rokem +1

      @@sv_gravity I have a general isea for the annotations/captioning. Essentially you want to describe everything you don't want to always associate to the person or style you are training. For style it is a bit more difficult and depend on what it is. I have nor done lora styles yet but I have an interesting dataset I could try... might learn a thing or two while trying.

  • @mjrodriguez2025
    @mjrodriguez2025 Před rokem +2

    This dude does such a great job walking through the steps and explaining everything.

  • @kiktamo
    @kiktamo Před rokem +3

    Thank you for all the info. So far I'll say the "Save training state" option is also pretty useful for if you get something workable but it needs a little more training just give it another round using the last state saved in the model folder.
    As a heads up though the next training needs either the same amount or same images as the first or it won't start. I figured that out the hard way when I tried lowering the amount of images for one pass.

  • @beantacoai
    @beantacoai Před rokem +12

    Excellent Video Thank you! One slight snag though, your json config file also changes all the directory folders to your personal file paths so people may get an error unless they reset the paths in the folders tab to their own file paths.

  • @mj7532
    @mj7532 Před rokem +1

    Thaaaaank you!!! I went through so many videos and text guides and nothing worked because there was some obscure error just sabotaging everything. Now I'm up and running with a functional GUI thanks to you. Again, thank you! Great guide!

  • @danieljfdez
    @danieljfdez Před rokem +2

    Absolutely amazing results!! Much better than training embeddings as previous explained method!! Thanks a lot!!

    • @kennethone6687
      @kennethone6687 Před 11 měsíci

      embeddings are so unpredictable sometimes....this is so on the point it's impressive.

  • @JustMaier
    @JustMaier Před rokem +39

    Gotta say I love seeing the community come together to create content like this. Thanks 🙏

  • @sazarod
    @sazarod Před rokem +149

    just a note the provided config file appears to set "mixed precision" and "saved precision" to bf16 which leads to an error, and needs to be changed to fp16 manually

    • @maxnami
      @maxnami Před rokem +5

      I was wondering why didn't work on me and was that! thanks !!! also it defaul call the model "adams"

    • @sazarod
      @sazarod Před rokem +1

      @@maxnami yeah, and the default paths have K's settings, but otherwise it all works great!

    • @Rentoa
      @Rentoa Před rokem +2

      thank you! i was wondering what i did wrong..... 😄

    • @dzft3w
      @dzft3w Před rokem +4

      I read somewhere bf16 is not supported for some hardware. Mine is working

    • @turkeycannon161
      @turkeycannon161 Před rokem +5

      I was staring at my screen wondering what the hell was wrong, started looking at the comments and saw this, you just saved me hours of wondering what I was doing wrong.

  • @ethanfink373
    @ethanfink373 Před 8 měsíci +1

    Omg I went from 400 steps taking 3 hours to 6minutes with these settings compared to one of your other tutorials. You're an absolute legend.

  • @allligatoahr4945
    @allligatoahr4945 Před rokem +2

    im new to this and try to learn everything important. your channel is such a BIG help! THANK YOU

  • @BernardMaltais
    @BernardMaltais Před rokem +53

    Awesome video! Thank you for making this. This should help bring the power of LoRA to many more folks out there!

    • @lefourbe5596
      @lefourbe5596 Před rokem +1

      i saw your videos before but couldn't make it run. now it freaking work thx to you and Kei.
      awesome work !

    • @Aitrepreneur
      @Aitrepreneur  Před rokem +3

      Thank you Bernard for making the hard work for everyone ;)

    • @gamingthunder6305
      @gamingthunder6305 Před rokem +1

      lora and hypernet are really good for changing the style of a model.

    • @Einscrest
      @Einscrest Před rokem

      Thank you also! So awesome for you to even maintain a github repo.

  • @a1lazydog
    @a1lazydog Před rokem +9

    In case anyone is following along, you no longer need to Set-ExecutionPolicy unrestricted for the newer versions.

  • @odawgthat3896
    @odawgthat3896 Před rokem

    Got my first ever lora model made! Thanks a lot supreme Ai Overlord!

  • @spartanbdx
    @spartanbdx Před rokem

    Legend! Learnt so much from your videos my guy. Keep up gods work. 🙌

  • @SuperEpic-vb8nq
    @SuperEpic-vb8nq Před rokem +3

    Honestly, you need to talk about Kohya gui in general. A local dreambooth installation with a visual ui is exactly what i've been looking for.

  • @revenger681
    @revenger681 Před rokem +5

    Your tutorials are very good. I am brand new to all of this and have been able to easily follow along. You move and speak quite fast, but that's ok - this is youtube and I can keep rewinding. Your style is much preferred to some who talk too slow and take 25 minutes to get to the point, or others who show just results without explaining details. You do both very well. I can rewind, pause and take notes, and follow along. Thank you very much for this! Next I want to find out if I can continue to further train lora like we did SD model training like in your other videos. What I mean is: can you add more training to an existing lora? Can I start a basic one then train it further?

  • @SpikyRoss
    @SpikyRoss Před rokem

    Thank you sir for always providing tutorials for new tools!

  • @popixel
    @popixel Před 8 měsíci

    Again... I have followed many tutorials online, and yours is the only one that worked. Great job on explaining things, the others always skipped explanations.

  • @lurker668
    @lurker668 Před rokem +8

    Just fixed my problem, had to swich bp16 to fp16 mixed precision. Thank you for that tutorial!

  • @cohan000
    @cohan000 Před rokem +28

    3:23: Instead just write "Powershell" or "cmd" in the URL-bar of the folder you're in

    • @Anonymous-gu2pk
      @Anonymous-gu2pk Před rokem +3

      I think I must have a different version of Powershell, because the commands didn't work there. Had to use "cmd" instead.

    • @SuperTakeoff
      @SuperTakeoff Před rokem +1

      @@Anonymous-gu2pk 🙏🙏

    • @videowatcher551
      @videowatcher551 Před rokem

      or you could Shift + Right Click "Open Powershell Window Here".

  • @iamtheoaa
    @iamtheoaa Před rokem +1

    Love you videos my friend. I've learned a lot!

  • @adydeejay
    @adydeejay Před měsícem

    Extremely useful and very well documented tutorial. Thank you! 👍

  • @Kwipper
    @Kwipper Před 11 měsíci +5

    Can you please make an up-to-date version of this video. The setup process is vastly different.

    • @lukashere7803
      @lukashere7803 Před 11 měsíci

      It's pretty similar, the biggest difference is the Kohya setup, and if you just read the messages in powershell, you should get it down easily

  • @TheXanUser
    @TheXanUser Před rokem +3

    From those of use with meager cards, thank you for including the minimum VRAM in title!!!
    Hate getting all excited about new AI only to find out after hours of trying that its not possible on my card. (yet)

    • @alejin9646
      @alejin9646 Před rokem +1

      Did it work for you? I don't want to make another installation attempt so that it doesn't work at the end XD. I only have 4GB of VRAM

    • @0ntimetaiment921
      @0ntimetaiment921 Před rokem +6

      @@alejin9646 Pretty sure 4GB will not be enough. I have 8GB and it sometimes crashes due to low memory.

  • @bassdrop001
    @bassdrop001 Před 4 měsíci

    Thanks, managed to train my LoRA in 7 minutes with your config, 150 steps - 14 images

  • @plateo_3234
    @plateo_3234 Před měsícem

    Thanks for this video. I've finally trained my first LORA. Other guides were not working on my side.

  • @AurrenTV
    @AurrenTV Před rokem +3

    My basic system security alarms go off like crazy watching most these videos XD

  • @giustex
    @giustex Před rokem +11

    If you use the red button under Generate to show the Lora files, like I do, you don't need to install the Additional network extension, it uses a completely different folder for lora files (it looks for them in the extension folder, not in the model folder). I train my lora files with the Kohya gui and don't use his extension, and the files work anyway

  • @BrogramFilmss
    @BrogramFilmss Před rokem

    Been waiting on this video!

  • @rule25dhub
    @rule25dhub Před rokem

    Love it thank you! Your channel has been super helpful.

  • @LordVittaminn
    @LordVittaminn Před rokem +45

    Also note that if you want to launch cmd or powershell from inside a specific folder without having to copy the directory and use "cd" or "cd /d" you can click on the the file path when you have that folder open and just type either "cmd" or "powershell" into the address bar then press enter. That will open cmd or powershell with that folder already set as its directory for executing your commands.
    It's an easier way to get things done.

    • @AlastorsNight
      @AlastorsNight Před rokem +1

      I had to do this because for some reason it wouldn't allow me to do so inside of powershell but, if I ran powershell from the directory itself, worked just fine.

    • @morphman86
      @morphman86 Před rokem +6

      Or shift + right-click and select "open powershell window here".

    • @lincestudio4547
      @lincestudio4547 Před rokem

      THANKSSSS

    • @angel_of_rust
      @angel_of_rust Před rokem

      how do you do that but with the admin cmd

    • @kennethone6687
      @kennethone6687 Před 11 měsíci +1

      i'm a simple man, i'm admin, i click

  • @Dante02d12
    @Dante02d12 Před rokem +23

    IMPORTANT NOTE : If you don't choose a custom model specifically, this process downloads a LOT of data, which isn't explained in this video. I clicked on "Train model", and it's started to download multiple files that are more than 3GB each. Ther's more than 15GB to download so the training works.

    • @bryantho5050
      @bryantho5050 Před rokem +2

      Thank you so much for this, was extremely annoying trying to do this with my bandwidth and I already had SD 1.5 locally as well.

    • @sofiiseize
      @sofiiseize Před rokem +1

      Hi ! Where I need to go for do this ? how /were I choose that custom model ?

    • @MeowsyDancer
      @MeowsyDancer Před rokem

      this

  • @stefanismx
    @stefanismx Před rokem

    Excellent, just thank you for your work.

  • @johnsmitht11
    @johnsmitht11 Před 5 měsíci

    I followed these steps, used the config file, and had much more success than trying to figure out settings on my own. Thank you. The trick for me was limiting the number of photos to 20 and using more repeats (100) like you suggested to get close to the 1500 step count with only 1 epoch. I also used only 512x512 images for both img and reg. This creates a usable LORA in about 20 minutes on a 3060 card, at about 1.8 it/sec.

    • @aduong13
      @aduong13 Před 26 dny

      are you use 3060 12GB?

  • @garrickgreathouse
    @garrickgreathouse Před rokem +8

    Information in this tutorial no longer corresponds to the links provided.

  • @Mirko_ai
    @Mirko_ai Před rokem +2

    About 9 min with an old RTX 2080 8GB and 19 images. Great Tutorial, thanks :)

  • @brunomendoza5478
    @brunomendoza5478 Před rokem +2

    Thanks a lot! I was able to create a Lora for a character that sadly has too few fanarts. The result was mind blowing!

    • @buketerbil4778
      @buketerbil4778 Před rokem

      hey how long did it take you if you don't mind me asking

    • @brunomendoza5478
      @brunomendoza5478 Před rokem

      @@buketerbil4778 about 10-15 minutes.
      I used only 10 images. Ryzen 7 5800X3D RTX 4070Ti

  • @DM-dy6vn
    @DM-dy6vn Před rokem +4

    3:23 [WIN10] to start the PowerShell in the open folder, just hold SHIFT and then right click on it, and choose "Open PowerShell in this folder" from the popup menu.

  • @oyentemaniatico
    @oyentemaniatico Před rokem +6

    Great video. What would be different if I wanted to train a Style instead of a face?
    How does LORA training compare against Dreambooth? Are the results on par or is DB still better?
    I also see a lot of LORAs extracted from checkpoints, I never found how to do that.

    • @taihuynhuc3135
      @taihuynhuc3135 Před rokem +2

      You should lower the repeats to around 2 to 10 depends on the dataset, higher the epochs number and lower unet learning rate and text encoder lr when training style.

    • @oyentemaniatico
      @oyentemaniatico Před rokem +1

      @@taihuynhuc3135 this is useful, thanks man

  • @exakelgaming
    @exakelgaming Před rokem +2

    The pre-made json files helped a bunch because I was seeing different results even though I followed all the settings. Before using the config file the loss rate was jumping all over the place and after using your config file the loss rate stabilized. I think the erratic loss rate was why my loras weren't working out. I dunno what settings were different to mine but i use your config file for a base.

  • @ameet21
    @ameet21 Před 11 měsíci

    Bro I love your explanation... You are the best! cause you explain things in proper detail
    where others Lora training video I watch those dumbshit start anywhere and like there tutorial like they bloody doing favor on us
    they don't even mention why the heck those folders so for viewer we think there is something inside in those folders. but you are the guy who explain you created it so that big help for viewer to understand

  • @endymion3213
    @endymion3213 Před rokem +6

    great tutorial, thank you! Anything you recommend for training styles using this method?

    • @keng4574
      @keng4574 Před rokem +2

      Hopefully he makes a vid on that as well. Definitely interested in styles for LoRA

  • @levigrey2309
    @levigrey2309 Před rokem +6

    Any chance you can make an updated tutorial. The GitHub is completely different now and following the new instructions I can’t get it to work at all.

  • @serta5727
    @serta5727 Před rokem

    Actually useful Lora tutorial for stable diffusion ❤😊

  • @xclavo3
    @xclavo3 Před rokem

    Thank you for teaching us so much!

  • @sergeyitdes
    @sergeyitdes Před rokem +3

    What advice would you have if you need to create LoRa for different characters in the same style?
    For example, the basic Stable Diffusion models don't know how to generate scenes from Futurama. How can I train one LoRa model to be able to get Futurama characters by including their names in the prompt?
    In Tagger I can make a text description for each source picture, the style 'futurama' and names of the characters can be entered there, but how to use descriptions to pictures in Kohya GUI?

  • @dkmegalegendario
    @dkmegalegendario Před rokem +6

    the git files have changed i think the tutorial is outdated by now,we need a new one

  • @jameshughes3014
    @jameshughes3014 Před rokem

    Thank you so much for this. This is awesome.

  • @ortizgab
    @ortizgab Před rokem

    Yessss!!! It works like a charm!

  • @lurker668
    @lurker668 Před rokem +7

    How many input photos is best? Is more better or there is a limit where results can downgrade? Edit: so im experimenting with amount (100 at the moment) of training photos. And best results get when i use lower number than 100_subject catalog name. Im using 30 at the moment and get best results into mixing face into model. Could be that i overtrain at some point but theere is no way to preview training live. Or there is but i cant find the catalog with generations.

  • @DanielPartzsch
    @DanielPartzsch Před rokem +5

    Thanks. If you have a strong enough graphics card and don't mind how long a training takes what gives you the best quality and most consistent results for training a face? Dreambooth, textual inversion or Lora (or something else maybe)? Also from my understanding, only with Lora and textual inversion you can use the training results with various models whereas a dreambooth training is always tied to the model you've trained it with, is this correct? Thank you!

    • @Aitrepreneur
      @Aitrepreneur  Před rokem +8

      You are correct yes, I still personally prefer DB, it feels more forgiving and more precise than TI and LORA but being able to use TI or LORA with any model is really nice too

    • @wagmi614
      @wagmi614 Před rokem +4

      @@Aitrepreneur when is the dreambooth with kohya tutorial dropping?

  • @michaelm7901
    @michaelm7901 Před rokem

    Thank you for the training.

  • @loszhor
    @loszhor Před rokem +1

    Thank you for the information.

  • @odawgthat3896
    @odawgthat3896 Před rokem +3

    Do we need to set the instance and class prompt using this method? I saw that you still used ohwx person, as you didn't highlight it in the video I thought it would be good to double check :)

  • @paulheavens1170
    @paulheavens1170 Před rokem +7

    Great video! Quick Q, how would the training method change for:
    a) A style
    b) a specific object in a picture

    • @itskiggu
      @itskiggu Před rokem +1

      The methods for person/face/object/style/concept/etc are pretty similar. The main change I notice is how you prompt to change focus. In the txt file you want to describe everything that you don't want trained as a concept that also appears in the image. It's hard to properly explain without examples, @kasukanra does a great job of describing this in their video "kasucast #13".

  • @flowerpixel
    @flowerpixel Před rokem

    worked!! subscribed!

  • @rruu11
    @rruu11 Před rokem

    thank you very much!!!! it turned out really great!

  • @ItsBrody
    @ItsBrody Před rokem +3

    at 3:02 we turn off some script security thing, should we turn that back on after we installed everything?

  • @astralastra5844
    @astralastra5844 Před rokem +3

    one thing, on windows 11 (idk about windows 10) u can just type 'cmd' or 'powershell' without brackets in folder address bar and press enter and it will open in that folder so no need to go to it via CD and address paste

    • @daconl
      @daconl Před rokem +3

      Works also in Win10

    • @Aitrepreneur
      @Aitrepreneur  Před rokem +4

      I knew for cmd but not for powershell, thanks!

  • @eunoiafineart2108
    @eunoiafineart2108 Před rokem

    thanks for making this LORA vid.

  • @kimweeng5358
    @kimweeng5358 Před rokem

    My G, perfectly explained and easy to follow. solid like and subscribe

  • @TutorialesGeekReal
    @TutorialesGeekReal Před rokem +4

    Great tutorial, can you please share with us how to keep training our first model, to get more similar results? or if you already explained it on another video, point us to the correct path! Thank you again!

  • @user-ux9pv5ct9f
    @user-ux9pv5ct9f Před rokem +3

    I accidentally select "no" for the mixed precision instead of fp16 in enviroment setting and got error when training
    is there a way to change it? or i have to reinstall the Kohya_ss
    Thank u for the great explanation!

  • @jucabalmacabro
    @jucabalmacabro Před rokem

    u are the man. THx and keep the good work

  • @vibitzo6590
    @vibitzo6590 Před rokem

    Thanks for your time

  • @Fongletto
    @Fongletto Před rokem +3

    Is there any difference to creating a concept instead of a character? Can you do a tutorial on making clothes/poses/styles as well.

  • @vjexmixv
    @vjexmixv Před rokem +3

    Unfortunately, the installation has changed completely in the meantime. Could you please make an update video? Although the installation instructions are actually clear, I can't get it to work because several errors occur. Thanks for your videos

  • @somecrazyusername
    @somecrazyusername Před 3 měsíci +2

    Your videos are really clear for instructions. Love it. Unfortunately, this software has evolved a lot and lots of this does not apply. It would be great if you could do an updated version. OMW to check out your other pages to see if there is something posted on those.

  • @intoxxau
    @intoxxau Před rokem

    Good results and fairly quick on a 8gb 3060 using your settings json with 1 batch, thanks

  • @Seany06
    @Seany06 Před rokem +3

    I was trying this but getting errors at the start after copying and pasting the data into powershell near the start, it says I don't have Python installed. I do as I have SD installed(A1111) and working but I am concerned about installing this python, doesn't SD only work with an older version of Python or can i just go ahead and install it? Thanks

  • @MisterWealth
    @MisterWealth Před 7 měsíci +3

    The kohya tutorial section is completely incorrect now. Does anyone know how to use it properly? Do I install to my Stable diffusion folder? and if so where, does it matter?

  • @greengrendel
    @greengrendel Před 5 měsíci

    I love that you say GUII like you'd say it's ya boiii

  • @Hasix6
    @Hasix6 Před 10 měsíci

    Thank you so much its perfectly work ❤❤

  • @tdfilmstudio
    @tdfilmstudio Před rokem +5

    Can you make another tutorial for the Dreambooth section of the Kohya GUI please? Thanks in Advance

    • @Aitrepreneur
      @Aitrepreneur  Před rokem +4

      I plan to yes :)

    • @tiebei2548
      @tiebei2548 Před rokem

      @@Aitrepreneur Is your basic settings file not set up for using a GPU? When I followed the steps to this video, it rained on my CPU and not my GPU. Is it Dreambooth LoRA that defaults to CPU? I noticed the setting for CPU cores butt nothing for GPU.

  • @kaijin5996
    @kaijin5996 Před rokem +3

    Please K do another tutorial for training local LORA's:) we will appreciate that:p

  • @GyroO7
    @GyroO7 Před rokem

    Great work

  • @vishalkhombare
    @vishalkhombare Před rokem

    Awesome Awesome Tut!!

  • @KingQuetzal
    @KingQuetzal Před rokem +2

    will this work on a 2080 super 8 GB VRAM?
    Also how much more RAM does it take to do 786x786 for high a resolution dataset?
    Does the number of input images effect the VRAM usage?
    Where can I download more ram? and bears
    thanks as always!

  • @observer137
    @observer137 Před rokem +3

    Hi, I keep getting "RuntimeError: CUDA out of memory. Tried to allocate 20.00 MiB (GPU 0; 10.00 GiB total capacity; 9.13 GiB already allocated; 0 bytes free; 9.26 GiB reserved in total by PyTorch)". I have NVIDIA GeForce RTX 3080 with 10G memory. I also used the low vram config. What should I do? Thank you!

  • @Grifter
    @Grifter Před rokem +2

    You can just shift click inside the folder and click launch powershell from this location. Just a quick tip for the future

  • @odawgthat3896
    @odawgthat3896 Před rokem +1

    Thanks a lot!

  • @northerain
    @northerain Před rokem +8

    Ran this initially and managed to train a model. However each time after that, even with low VRAM settings, I get CUDA: out of memory error no matter what settings I use, even if I drop the image size. I feel like this is a bug somewhere.

    • @danbaghoi4132
      @danbaghoi4132 Před 4 měsíci

      bro I have the same problem. Idk what to do.

  • @Bosiks910
    @Bosiks910 Před rokem +5

    For anyone with the "Error no kernel image is available for execution on the device" error. The "8bit adam" checkbox has been moved to "Optimizer" section as a dropdown instead on 2023/03/05 (v21.1.4). I have no idea which one to select but I tried until one worked.

  • @TheLittleKittyCat
    @TheLittleKittyCat Před rokem

    Hey Altrepreneur, I've been trying to copy the Windows installation through Powershell. But It just give me a problem that I haven't seen before.
    cd : The 'Set-Location' command was found in the module 'Microsoft.PowerShell.Management', but the module could not be
    loaded. For more information, run 'Import-Module Microsoft.PowerShell.Management'.
    At line:2 char:1
    + cd sd-scripts
    + ~~
    + CategoryInfo : ObjectNotFound: (Set-Location:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CouldNotAutoloadMatchingModule
    And there others text of red as well, I'm a bit lost at the moment. Is there something missing that I haven't looked?

    • @davii.d
      @davii.d Před rokem

      In case you werent able to fix it, putting " " around the folder location, like this: cd "C:\MyStuff\Programs\Stable Diffusion\Kohya" fixed the issue for me.

    • @TheLittleKittyCat
      @TheLittleKittyCat Před rokem

      @@davii.d But that's the weird part. It working just fine around months ago when I installed Stable Diffusion, but when LoRA came out.
      This happen. I simply use a easy path to where I couldn't find it around the folder of stable diffusion: cd "D:\AI\Kohya"
      I tried other locations like documents or desktop, but it did the same thing.

  • @thedevilgames8217
    @thedevilgames8217 Před rokem

    the set other location like cd /d E:\ not working says Set-Location : A positional parameter cannot be found that accepts argument
    any fix?

  • @Xotchkass
    @Xotchkass Před rokem +3

    3:48 in poweshell cd doesn't need /d do change drive. PS doesn't even uses slashes for parameters, it uses dashes like bash

    • @itskiggu
      @itskiggu Před rokem

      Thank you, it wasn't working with the /d and then I tried with just "cd E:\Kohya" and it worked

  • @vegacosphoto
    @vegacosphoto Před rokem +5

    Trainning my first Lora right now. For people with WEAK GPUs like me, it's taking 2 hours and 45 minute to train using 16 photos. I have a GTX 1660 Super with 6gb vram

    • @fadilabn9832
      @fadilabn9832 Před rokem +2

      Please inform us if it works fine on 6g vram
      And give us image number, res,other barameter
      Thanks

    • @vegacosphoto
      @vegacosphoto Před rokem +2

      @@fadilabn9832 it worked like a charm.

    • @bhshkpl
      @bhshkpl Před rokem +2

      Was this with fp16?
      With full precision, it did train but it took 23 Hours!! Had some weird xformers issues with fp16

    • @marceloschild1032
      @marceloschild1032 Před rokem

      why does it take so little time? I'm using a 1660ti on a laptop and it's taking 5 hours using the low VRAM config file as it is with 14 images. Also I'm not being able to use the LORA model once trained. Somehow SD throws the same results whether I include the LORA prompt or not.

  • @jaymabazza
    @jaymabazza Před rokem

    amazingly tutorial!

  • @iBaaCacHee
    @iBaaCacHee Před rokem +10

    Nice implement, i get this error
    raise ValueError(err.format(mode="bf16", requirement="PyTorch >= 1.10 and a supported device."))
    ValueError: bf16 mixed precision requires PyTorch >= 1.10 and a supported device.
    any idea =?

    • @hfoxhaxfox1841
      @hfoxhaxfox1841 Před rokem

      same :/

    • @sazarod
      @sazarod Před rokem +7

      @@hfoxhaxfox1841 manually change "mixed precision" and "saved precision" to "fp16" -- the config file messed that up

    • @iBaaCacHee
      @iBaaCacHee Před rokem +3

      @@sazarod Thanks fixed :D

    • @MovieCapzzz
      @MovieCapzzz Před rokem +2

      @@sazarod THIS

  • @paulrayner6744
    @paulrayner6744 Před rokem +1

    Hello, I don't know if you still read comments on older videos but thank you for the tutorial, it's clear and concise. I just have two questions:
    1. If the character which I train wears gloves by default, for the images she's not wearing gloves do I just add "no gloves" or "gloveless" (is this even a word xD?) in the .txt prompt for those images? Or it's already implied she's not wearing gloves based on the other words from the prompt (beach, sauna, swimsuit etc.) for the image?
    2. For the pretrained model is there any scenario in which you put a custom model there? All my custom models are based on SD 1.5. If I put a custom model do I get better quality or something?

  • @p_p
    @p_p Před rokem +1

    16:25 does this imply to trim the dataset to 768x768 too? i dont get it

  • @Sabrinahuskydog
    @Sabrinahuskydog Před 11 měsíci +3

    It appears the instructions on the github page and the way this is setup for Kohya SS is completely different and changed today vs what you showed in your video. I watched your video through before going to the github page and now I'm sad because all of your instructions don't line up with what's on the github page and now I'm confused and not sure if I can get this installed correctly. I guess your video is completely outdated now. on the setup portion. :(

  • @DJ_K0D4
    @DJ_K0D4 Před rokem +5

    This is pretty cool but I would like to mention setting Execution Policies to not be signed is almost asking for trouble. Unless you are a power user I would NOT recommend doing thing. It make it way too easy to run malicious scripts/code.

    • @chiwa-info
      @chiwa-info Před rokem

      So what do we need to do in the process, plz?

  • @dasomen
    @dasomen Před rokem +2

    Would you kindly make an update for this topic? In the past I've followed this video and it worked but apparently the newest updates to Kohya SS broke something. Thanks for the great content!