How to Replace Lower Ball Joint 2003-2007 Nissan Murano
Vložit
- čas přidán 6. 03. 2022
- Buy Now!
New Ball Joint from 1AAuto.com 1aau.to/ia/1ASBJ00346
This video shows you how to install new, quality TRQ ball joints on your 2003-2007 Nissan Murano. Car and truck suspensions combine a number of moving parts for safe and stable handling. The ball joint is the crucial moving component that ties those parts together. The ball-in-socket joint can wear out and loosen over time. Or, the rubber protective boot can tear, allowing contaminants to seize the joint. Bad ball joints are a common failure point on vehicle inspections because they lead to unsafe driving conditions.
This process should be similar on the following vehicles:
2003 Nissan Murano
2004 Nissan Murano
2005 Nissan Murano
2006 Nissan Murano
2007 Nissan Murano
Tools you will need:
• Flat Blade Screwdriver 1aau.to/ooI/1AXAA00013
• Pry Bar 1aau.to/odU/1AXAA00020
• 22mm Wrench
• 17mm Socket 1aau.to/ooD/1AXAA00015
• 19mm Socket 1aau.to/ogf/1AXAA00043
• 21mm Socket 1aau.to/ogf/1AXAA00043
• Ball Joint Press
• Snap Ring Pliers
• 1/2 Inch Air Impact Gun 1aau.to/oaV/1AXAA00252
• 1/2 Inch Breaker Bar 1aau.to/oaZ/1AXAA00078
• 1/2 Inch Ratchet 1aau.to/ogf/1AXAA00043
• 3/8 Inch Drive Ratchet 1aau.to/ooD/1AXAA00015
• Torque Wrench 1aau.to/oiC/1AXAA00044
• Rust Penetrant
• Floor Jack 1aau.to/oeb/1AXAA00068
• Hammer 1aau.to/odR/1AXAA00091
• Jack Stands 1aau.to/odU/1AXAA00065
Subscribe: / @trq
Check out our playlist:
Nissan Murano 2003-2007 1st Generation: • Nissan Murano 2003-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Great job with the high quality video and commentary. Wow! That Murano was a rust bucket. Doesn't have many more years left before the frame crumbles.
Wow that was so easy.. if you have a lift and the fancy tools! Tip if you don’t be prepared to pay $80 bucks an hour labour! Haha
Might as well jus change the whole control arm then because it comes with a ball joint on the new ones. Most don’t have that tool and would lead to renting that tool out at the price of a whole new control arm. Rent gets the money back but still. Great video otherwise👍🏽
Love the videos show more please
So if it's not straight than it means needs change if the ball joint bent like this in video means change time right tha KS for video you earned subscriber
So if I understand this correctly, I need to remove the lower control arm to replace the ball joint?
I can change control arm with ball joint together right I don't ha e to take ball joint out
Sneaky, you did this when you replaced the control arm video. I thought you need to add grease to that ball joint?
This is a lower control arm replacement.