2017 ZR 9000 Turbo Has Low Compression...Can It Be Fixed??
Vložit
- čas přidán 8. 08. 2023
- In this video Billy and I dig into his sled to see what the issue is with his motor and see if we can fix the reason why it has low compression. turns out the valves were all leaking worse than a screen door on a submarine!! I think with a good valve lap job and a new head gasket Billy's sled will be ready to rip this coming season out on the ice and should run some seriously fast speeds! and our buddy Kerry takes my F7 to get her ready for some grass drag events!! shout out to K&B Performance! the F7 is gunna freakin DANGLE!! 🤣🍻
As always thanks to everyone that watches,supports and subscribes to the channel! we really appreciate it and to everyone checkin out the merch
www.rednecks-dirtyhands.com
I hope ya's enjoy the video! cheers 🍻 - Auta a dopravní prostředky
MGD America gotta love it keep it coming
cheers 🍻
...you forgot the water lol..amen man 🍻
lol cheers 🍻
🔥she’s Gona dangle forsure.. sleds to beat at grass drags we’re the srx 700 triples. This was years ago tho🔥👊🔥🔨🏍⚙️🚜
yessir! cheers 🍻
If Amazon would put a square head on that spring compressor tool, a guy could get a socket on there with the Milwaukee/DeWalt and run them up and down quickly - speed the whole thing up.
not a bad idea right there! cheers 🍻
Can’t wait to see the F7 upgrades!
This Eskimo was haulin ass on his sled right.
Then all of sudden "bang" it quits runnin.
So he takes it to the shop.
The tech takes a quick look, and tells the feller.
It looks like ya blown a seal.
The Eskimo replies, no no that's frost in my mustache.
🤣🤣 Nice One! 🍻
How in the !#&! do you know all of this. You are definitely the Surgeon General of the Snow Machine World! Very Admirable.
Pete your so knowledgeable about what you do. Your f7 is gonna be wild can’t wait to see it 😀cheers 🍺
cheers 🍻
Hey Pete, on my older small block Chevy stuff I just lightly attach the drill chuck to top of valve stem, gets the job done super quick, a guy could probably utilize that on that job as well if there’s room for that, and if not perhaps use a piece of thick transmission hose between valve stem and drill, these are just ideas lol
Good tip! cheers 🍻
Great video Pete, looking forward to seeing your f7 at the grass drags and Billy’s sled back out on the lake!👍
Thanks 👍cheers 🍻
Thanks for my weekly 'happy' fix, Pete! Beats $150/hr on the couch any day of the week😁😎👍
🤣 glad to help! cheers 🍻
Obviously it is a little late to help you guys but I did both heads on a 2000 Dodge 5.9 magnum and I found using a battery powered drill worked amazingly well. it would of taken me forever and probably blistered both hands. Obviously for anyone never lapping valves before I do not suggest trying this but I feel you have enough mechanical aptitude to not destroy the valves. it has been 5 years now and the engine has over 260K (Miles) and if I remember correctly about 6 months ago I checked and the engine had between 143-145 PSi so it is still working great.
thanks for the tip! I'll giver a go 🍻
Nice work dirty hands 👍
Thanks 🍻
Awesome video man can't wait to see that 7 grass dragging. Make sure u video it all.
You have a lot going on in your shop Pete, I wish I had your knowledge.
haha yeah there's always something goin on here!! cheers 🍻
nice to see the sled content ! love watching your vids!
from New-Brunswick 🤟
Awesome! Thank you! cheers New-Brunswick 🍻
Hey Pete I like that guys shirt Polaris lol. That will be awesome Pete see the f7 giver lol.
lol yeah I chuckled to myself when I saw the shirt 🤣 but he will definitely make the F7 Dangle!! should be pretty sweet! cheers 🍻
Awesome video, can’t wait for the next ✌🏻 Cheers 🍻
🍻
Would've been a nice touch if you did the Ghost movie pottery scene with Patrick Swayze on the valve lapping part lol. Who would play Demi Moore?
lmao 🤣 Nice One! 🍻
Keep up the awesome videos! Absolutely look forward to seeing the notification that you uploaded a new video! I would however love to see more skidoos in videos lol 😆
haha I'm sure we'll get a few ski-doos in too!! 🤣🍻
oooww F7 Juice!
Oh hell yeah Pete! Never too early in the summer to get ready for sledding... I started tinkering with the fleet last week. Bring on the snow!!
haha yessir! 🍻
Grass Dangling is gonna be awesome with that fine looking Cat 😎👍🍺🇺🇸🇨🇦
yeah buddy! 🍻
Cheers 🍻 🥂 🍻 🥂 Pete. I love all your video content. Especially the sled stuff. It was because of you that I got my polaris edge 600 going. Pitter patter git at er.
Nice One! that's awesome..Pitter Patter 🤣🍻
I’m doing this same thing on my 2010 nytro right now pretty much same engine it’s going to be my first time I’m in New Brunswick first 4 stroke Yamaha for me
Nice One! cheers New Brunswick 🍻
You mentioned North Bay! thats where i live, i got an 04 pro x2 800 setup with forged internals, jetted, clutched, slp single pipe, geared and its an absolute monster in a 500ft. if you're ever on lake nippising and wanna race im down whenever.
Nice One! if we get up there I'll hit ya up! 🍻
@@rednecksdirtyhands sounds good boss! Been a long time watching your vids favourite channel since I started!
Love the vid guys keep the sled s coming sno,s coming lol yeer haaaa!
haha cheers! 🍻
Cheers Pete
cheers 🍻
It sometimes helps to put a small spring under the valve and then it will pop up when you stop rotating . Good call on your joining up with K & B Performance
thanks! 🍻
Well if he beats yo mama you will have some work to do!!! Good stuff as always!
lol yeah it will be close I think but we'll see 🤪🍻
Another great video
thank you! 🍻
Your a good competitive guy. Enjoy your videos, keep them coming
haha thanks! 🍻
Nice one Pete. Keep up the good work. At least you gave up that crappy Bud Light after all the hubub 🤣🤣🤣🤣 I am definitely ready to snowmobile....
🤣cheers 🍻
Great video Pete keep them comming yes snowmobile season is comming
thank you! cheers 🍻
I remember grinding valves in my uncles shop tedious job looks good Pete! Nothing beats an f7
You got that right! 🍻
Hey Pete, your videos are excellent. You are making a big mistake though, you need a different beer, maybe something from the Rockies?😜😜😜
SO CLOSE TO 20K SUBS...LET'S GO PEOPLE!!!
haha we're gettin close!!! thank you for the support!! cheers 🍻
I think the latest ARP kits come with a shorter bolt for that waterpump side one now. Great vid, I gave up on my sidewinder with head issues (not the good kind haha). Hope she flys again! 146 mph is moving pretty good!
yeah i haven't seen if they have a shorter one or not..but that would make sense! glad ya enjoyed the video and I'm sure it will make a good pass this season on the ice 🍻
If those are ARP studs and washers those washers have to go a specific way if there's a taper on one side taper goes to the nut side , that's how they are on my head bolts and studs in my race engine
I fucking love your videos man keep posting!
thank you! cheers 🍻
keep sing that fuel nd you'll have to get new valves and seats.
Rig up a second tank, after a a run you can switch over to regular fuel(whatever grade it will run on), and maybe a touch of two-stroke oil. That is, if the plug will burn it, but it usually do unless you tweked the motor to the limits
The race fuel is also hard on injectors, rings, cylinders, carbs, and fuel pumps, etc as it is very corrosive.
Awesome video. Put a link to the grass race event. I know where it is because my brother lives in Merrickville. My sister and brother all have Cats. We will check out the event and hope to see you and your merch there. 👍🏻
sweet! yeah i forgot to add a link for the event but I'll take a look! cheers 🍻
In 35 years of wrenching, I have never seen a cylinder head tighten from the outside inwards, that would be how you remove a head, always tighten from the middle outwards. I wonder if that picture you used was for removing the bolts?
yeah seemed weird to me too but that's what yamaha says to do in the service manual....I guess we'll just have to cross our fingers and see what happens this winter lol 🤞 I'm sure it'll be fine...those fellas at yamaha seem pretty smart 🍻
60ftlbs final torque
I wonder what was tighter, that head or Pete's sphincter.
🤣🤣🍻
Nice job pete..i wish i could bring the 800 renegade out so u could have a tap at it. Lol.
haha Nice One! cheers 🍻
Awsome to see you guys teaming up .. Will you be posting the f7 content ? Keep up the good work ...
thanks! yeah we will definitely try to get some content of the F7 for sure! cheers 🍻
Is Stan going to write Polaris on the side of the F7?
Hope Yamaha lets Arctic Cat Feature the Turbo 4 Cylinder Underdrive Engine.
now that would be awesome! 🍻
did you notice that the valve springs have a up side. i mean the tighter coil goes down the head to prevent valve float.
To bad I have multiple felonies, I have a zrt 600,zr 600 that's clutched studded and a hot rod chip, and a 2008 efi F7 heavy bore kit 907. Would love to ride with you 🎉😢
You make it look easy!
haha thanks! 🍻
Just remember, if Pete can do it, you can do it
I like using egg cartons to keep the valve parts organized 😎👍♥️🤣🍻
good idea!! cheers 🍻
Great videos Pete! Why not just shorten up the stud near the water pump and thread it down to the same distance as the others?
thank you! yeah I suppose ya could shorten it up and make it the same hight...I gotta put some studs in the motor in YOMAMA so maybe I'll giver a go! cheers 🍻
Hey Pete question for you cuz you know a lot about snowmobiles motorcycles what not what is the standard horsepower on a 650 4 cylinder engine?? If you can please let me know I have one that is 70 horsepower stock
Great vid! Think that cancer will come back however. I dont know if he runs race fuel all the time , but maybe a tune for 92/93, run it every other or something.
yeah absolutely! need to run the regular fuel every once and a while 🍻
Just curious if you made a part 2 of this
not yet...🍻
Boy, Pete sure does crack himself up, doesn't he? Ugh...
haha yessir! if ya can't laugh at yourself then what's the point 🤣 I'm just a happy fella 🍻
Pete locktite is a no no on head studs !
I think the F7 is going to beat your mama ! Slap her silly LOL
lmao 🤣 maybe... 🍻
Canada told me no bueno for entering
i would of cut the seats with my cuter and lapped it in after
Brother how do you know so much shit? Nice one!
haha I don't know it all but I'm always willing to learn and try to fix what I can! cheers 🍻