Video není dostupné.
Omlouváme se.
【TAIWAN T-N.T. STUDIO】TERMINATOR HOP-UP Retrofit kit for SIVERBACK-SRS / How to assemble & preview.
Vložit
- čas přidán 14. 08. 2024
- 【TAIWAN T-N.T. STUDIO】
TERMINATOR FULL HOP-UP RETROFIT KIT for SIVERBACK-SRS series
●Introduction：www.taiwangaote...
Developed and produced by TAIWAN T-N.T.STUDIO, the products that everyone expects!
For SILVERBACK-SRS dedicated HOP chamber : [ TERMINATOR ] !!
It's not just changing the type of bucking used, there are so many details!! T-N.T. envision more for you ;)
The following will introduce you to this [ TERMINATOR ] SRS dedicated HOP chamber!!
1. The body is made of aluminum alloy and CNC precision machining. A reference line is drawn at the entrance, which makes it easier for the player to identify when installed, convenient and efficient!!
2. Changed to use the VSR specification TR-HOP bucking, the entry is thick and easy to achieve completely air-sealed without any rework.
3. Precisely calculate the final standby position of the best, the BBs can be positioned more accurately at the initial point of the HOP, to achieve the maximum frictional force, and thus get a more stable and farther effect range.
4. The inner barrel is fixed by 4 points - above/below/left/right, the inner barrel is more stable, and can be completely avoided the deformation of the inner barrel wall. And we designing a shock-absorbing O-ring at the end of the HOP chamber also mitigates the impact after the piston released, more increase stability!!
5. T-N.T. original creation - Fixed point & Positioning "Upper plane / Lower curved" HOP nub design!! Can be completely fit with the HOP lever, so that the HOP nub no longer slip, to achieve the best HOP performance, give full play to the performance of TR-HOP bucking!!
stainless steel hop arm. so that the nub can adjust the front / back / left / right tilt angle. Increased HOP pressing area with tilt adjustable nub, no matter the new player or high-level player, everyone can make the most of your DIY skills and create unlimited possibilities!!
6. The HOP lever made of stainless steel adopts the embedded design, and does not slide back and forth. ●The HOP lever is designed as the maximum torque of the body, and the angle is close to vertical when the HOP is pressed, to improve the short HOP lever - the torque is too short, and the lower pressing surface is offset back and forth, make the force surface more even and get more friction. ●HOP adjustment range is larger, it can easily correspond to more types of BBs (weight). ●The bottom of the HOP lever adopts a return spring design, which effectively avoids the invalid space between the HOP lever and the adjusting wheel, which makes the adjustment of the HOP more precise and improves the overall HOP performance!!
Makes your SRS turns killing weapon in next higher level!!
----------------------------------------------------------------------------
【TAIWAN T-N.T. STUDIO】
●Official website:
www.taiwangaote...
●FaceBook :
/ tnt.studio.tw
●Instagram : _tnt_studio
/ _tnt_studio
○Purchasing methods :
if want to buy any product, or any questions, please pm to our FB ☺
![Airsoft - T.N.T - Kit retrofit Terminator et tête de culasse sur roulement pour SRS [French]](/img/n.gif)
TNT的產品一直都很不錯 ! 尤其氣密的部分，完全無須任何加工 讚喔!
謝謝
Wooooo what a amazing work! 👍🏽👍🏽👍🏽👍🏽
Thanks a lot ;)
can i use any open windowed vsr type barrel with it (like laylax vsr barrel). Is it compatible with standard vsr bucking (if i cut the side nub) ?
Uria 64800 yes.you can try it
hi guys an amazing product you develop there i like the seal i bought me one of the terminator chambers but i got some problems maybe you could help me figure out whats wrong if i put my hop above 4 on the dial my bb's getting stuck and dont shoot any more
and i use an SRS Barrel S+ you made
Hi, we recommend slowly increasing HOP-UP when you test shooting, under normal circumstances you turn to 3 should have pretty good performance. So maybe you can turn back to 2~3 and try again?
Or maybe also need to check if the installation process correct or not?
Hope this can help you, and thanks for support T-N.T. ;)
@@TAIWANTNTSTUDIO i installed it now 2 times over im pretty sure i did every thing in the exact order like u guys did in the video but the same results i can dial it to 4 but not above it im using o.48 gramms from hot shoot and the blue nub but thanks for the fast answer
Hmm... "bb's getting stuck and dont shoot any more" we thought that maybe over HOP cause this problem, we just turn to 2 and shooting 0.4g BB very well... so we think that should not need to turn to 4...
The standard HOP lever is thicker (0.8mm), and we have made thinner lever (0.5mm) too, maybe you can consider it if you needed, thank you :)
I think 4 is too much... With 2.8 Joules I'm lifting .45g BBs with the dial at 2.5. What's your country Joule limit? Cause if it's too low, maybe you just don't have enough power to lift them.
Hello power sir
Thank you ;)
Mine arrived today, with a TNT S+ 510mm bridged barrel too. After trying some configurations and do some tests, i I want to try to solve some of the doubts you may have:
-The airseal with the provided VSR bucking is awesome, perfection.
-As they say, you can fit an AEG bucking in your AEG barrel when you assemble de chamber, but you won't be able to use your rifle! I couldn't move the bolt entirely to the front, I had to change the bucking (ML Macaron 60º) for the provided one. The lips of an AEG bucking are shorter, and this causes the inner barrel to move backwards in the hop up chamber, so the nozzle will touch the bridge of the barrel. Could I fix this moving the barrel to a forward place inside the chamber? IDK... maybe, but since this chamber it's designed for working with VSR buckings, I ain't even tried.
-Tried a ML Decepticons VSR bucking as well... once installed, i saw that the seam was partially out of the S+ barrel window because of the bridge. Curiously this doesn't happen with the provided VSR bucking.
-It's a chamber clearly made for lifting heavy bbs, with regulation at number 2, .40g bbs were flying like hell. At number 3 lifts .45g too. Amazing.
No field tests yet, I'll try to update soon!
Cheers and lots of BBs Airsoft mates!
UPDATE 1:
-In the video, they say that the chamber doesn't wobble left/right when you install the outer barrel... it wobbles, just as the standard chamber. And my SRS is new so there's no play/wear in the steel BB feeding tube.
UPDATE 2
1rst FIELD TEST:
The results are breathtaking... 95m effective range (measured with a range finder) with .45g at 2.8 Joules, laser shots. BBs go exactly where you're aiming at. What most surprised me was that I didn't had to touch the dial to readjust the hop during the whole game!!!... and I shot like 100 rounds in total. Can't say the same of my other two fully upgraded snipers (AA T-10 and Well L96).
All this was achieved with WASP piston and a Silverback M160spring too. This chamber It's worth every money, congratulations TNT!!!
have you tried a ML crazy jet barrel in this chamber combined with a ML vsr bucking?
@@streetss94 I suppose that you're asking that in terms of fitment, right? I haven't tried a VSR standard inner barrel in this chamber yet. I have a fully upgraded Action Army T10 rifle, with a DeepFire 6.04 VSR inner barrel and a ML Decepticons 60ª bucking, maybe one day I'll try to fit those two inside de chamber. Something makes me think that TNT products are made to be 100% compatible with other TNT stuff only
@@dant3330 yes, I have a srs and now i am wondering whether a ML crazy Jet will also fit in the chamber since TNT claims unbridged barrels also fit.
Thx for your answer. Also have a feeling tnt will fit 100%. But In will let you know how the ML fits👍🏼
@@streetss94 Great! The only variable I see is the pressure point of the nub, because I compared both buckings (TNT & Maple Leaf) and de ML seam seems to be in a more advanced position, idk how this can affect the performance. Waiting for your feedback!
@@dant3330 new comment above
Does this work well with the stock barrel or pdi inner barrel?
stock barrel is AEG spec, if you really want to use stock barrel on TERMINATOR, you will need to machine the inner barrel first - make around groove like GBB barrel, thanks.
想問如果是用pdi aeg管 是否通用這座和膠？
您好，這組TERMINATOR HOP座 我們已經更改其為使用類VSR規格的膠皮，所以無論您要使用哪個品牌的內管，只要它能安裝VSR膠皮就能使用，但前提是需要先確定內管的HOP窗口是否足夠大以容納安裝TR-HOP膠皮。
希望以上能幫助到您，謝謝
Does this work with other brands of barrels like PDI?
Hello, of course no problem, thank you :)
@@TAIWANTNTSTUDIOWithout any modifications? So just using the nubs and bucking included with the terminator I can fit everything just like in the video?
Because the TERMINATOR is using similar VSR type bucking, so if using GBB/VSR spec. unbridged inner barrel is compatible, or we have full kit include bucking, S+ inner barrel and TERMINATOR HOP chamber :)
Of course the T-N.T. inner barrel series is common platform, can use on GBB/AEG/VSR ;)
can be used with TNT aeg barrel?
Hello, all the T-N.T. inner barrel series is common platform, can be used on AEG, GBB, VSR etc, just replace the bucking according the gun type.
Of course T-N.T. inner barrel can support all of T-N.T. HOP chamber products, thank you :)
Thank you for the new hopup chamber. I have already ordered. When will you add subtitles?
Can u please let us know if it's good? Thanks
subtitles done, thanks :)
Where did you order about?
@@JamesKMuirhead www.taiwangaote.com/terminator-full-retrofit-kit.html
How much will it cost?
www.taiwangaote.com/terminator-full-retrofit-kit.html
www.taiwangaote.com/terminator-hop-chamber-kit.html
How can I order here in the UK?
please contact skirmshop.thanks.
When can we buy this please?
www.taiwangaote.com/terminator-full-retrofit-kit.html
www.taiwangaote.com/terminator-hop-chamber-kit.html
thanks.
This does not tell the release date for sale :(
NOT worth the price at all! It performs well but not better than the FAST unit. The hop Up arm is not fixed to the unit so if you pull it out the out barrel the arm and the spring will fly all over the place. there is no extra spring included and the spring of a ballpen will not fit into the hole of the unit where the spring must be placed.
But it will fit maple leaf buckings and maple leave crazy jet inner barrels
Thank you for your criticism, we believe that after fine-tuning, there will be very good performance.
We are also very grateful to everyone who supports T-N.T. , we will continue to develop better products for everyone who love airsoft :)
EDIT: Maple leaf Barrels & buckings fit but Not without Modifications of the bucking. I have extreme Hop Up issues. Have to Figure Out how to fix it