THSPD Throttle Delay Function on RC6GS V3/RC6GS V2/RC6GS/RC4GS V3/RC4GS V2/RC4GS
Vložit
- čas přidán 29. 05. 2022
- THSPD function applies to all RadioLink transmitters such as
RC6GS V3, RC6GS V2, RC6GS, RC4GS V3, RC4GS V2, RC4GS and so on.
THSPD, called throttle speed or throttle servo delay. It’s a commonly used function in RadioLink transmitters such as all versions of RC6GS and RC4GS.
As we all know, sudden trigger operation on a slippery road may cause the wheels to spin and the vehicle cannot accelerate smoothly. Setting the throttle speed can reduce wasteful battery consumption and make smooth throttle operation.
The MODE of THSPD defaults to OFF. Speed1 or speed2 can be selected.
For SPEED1, the delay setting works for the whole throttle travel. It defaults to 100, which means there is no delay. 0 means the slowest throttle speed(full delay)
For SPEED2, it divides the whole throttle travel to 2 parts, which means you can set different speed for the front part and back part of the throttle travel. LOW means the front part. I set it to 0, the slowest throttle speed. High means the back part. I keep it 100, which means no delay. And TGP means the cut-off point of the travel, which defaults to 30. I set it to 50.
Now, let’s check the servo display. Throttle goes very slow in the first half , but goes with no delay in the second half.
For more details of RC6GS V3:
www.radiolink.com/rc6gsv3
Purchase link of RC6GS V3:
www.radiolink.com/rc6gsv3_whe...
You can send mails to after_service@radiolink.com.cn if you have any questions during using our products. - Auta a dopravní prostředky
Road link should be very proud To have a representative such as yourself.You are so Perfect to explain these products.. Great job once again.
Thank you so much. It is my pleasure. If you want know any other tutorials on function of our products, please feel free to contact me. Our email is: after_service@radiolink.com.cn
The throttle speed function on the RC4 was key to getting my serpent 998e drag car dialed in! Very hard acceleration with out traction loss can be achieved with proper tuning of this function. 3 other local racers have now purchased a radio link after seeing my success with them. Keep up the good work!
That sounds wonderful! I guess you are a brilliant racer. It will be wonderful if we can see how you use the function in video.
Try this on my drag and speed run setups. Thanks for explaining this.
Hope it will be helpful to our users. If any question when using our products, please feel free to contact us. Our email is: after_service@radiolink.com.cn
Perfectly explained and made simple. Thanks
Thank you. If there is any question when using it please feel free to contact us.
Thank you for making this video this video helped me out a lot my car performs a whole lot better 💨
Great to know that it's helpful to you. If you have any questions when using our products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Absolutely love this transmitter thanks you ❤️
Great to know you like it. Any question when using it please feel free to contact us. Our email is after_service@radiolink.com.cn
Useful info!
I need to set this up on my speed run car Great how to video
Great to know it's helpful. If any question when using our products, please feel free to contact us. Our email is: after_service@radiolink.com.cn
hello Radiolink people you need to teach all the options from number 1 to reset I'm from Brazil and we don't have resources here please put audio we videos and subtitles we Brazilians thank you
Hello, sir. We'll take more tutorials on it. You may keep an eye on our channel. And you can also check the detailed manual of RC6GS V3 on our official website first. It also introduces all the functions of RC6GS V3: www.radiolink.com/rc6gsv3_manual If any question when using our products, please feel free to contact us. Our email is: after_service@radiolink.com.cn
But can you make so there is no delay when you release throttle and the return back to neutral. That delay on the throttle return is very hard to use when drag racing or speed running.
Hi, sir. Are you using RC6GS V3 transmitter? Could you please download and install the latest firmware V690, the throttle delay function is already improved and updated in the latest firmware. If there is still any question about RC6GS V3, could you please take a video to us? Our email is: after_service@radiolink.com.cn
I have rc4gs that come with a v3 receiver i bought a few v4 but they dont work as well as v3 do i need to update my transmitter
Hello, sir. Do you mean R6FG V1.3 and R6FG V1.4? R6FG V1.3 and R6FG V1.4 are the same receiver, with the same function. Both of them can work with RC4GS transmitter. It has nothing to do with firmware update. We recommend you to test RSSI of your receivers. Here is the tutorial on how to test RSSI for your reference: www.radiolink.com/newsinfo/561239.html If there is still any problem, you can also send email to after_service@radiolink.com.cn
Why is it only for Throttle channel? For example, I would like to speed down movement of servo horn between positions. Why not just provide consumer with ability to specify the same settings for any channel, not just for Steering and Throttle? To use or not to use - it is up to consumer.
Hi, sir. Thank you for your feedback. Many users use delay for throttle and steering. There is less need for delay of other channel now. But I can send the feedback to our enguineer and hope it can be achieved in the future. If any question when using RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
What does the Fwd-VTR funtion do?
Hello, sir. FWD-VTR is similar to FWD-EXP. For FWD-EXP, you set one rate for the whole travel. For FWD-VTR, you set one rate for the whole travel, but there is one demarcation point in the whole travel. Here is detailed manual of RC6GS V3, which includes detailed introduction for all the functions. You may have a check: www.radiolink.com/rc6gsv3_manual If there is any other question when using it, please feel free to contact us. Our email is:after_service@radiolink.com.cn
My motor is still too fast can anybody help me figure out how to get it to stop rotating so quickly?
Hi, sir. THPSD is for throttle delay. If you want to slow down the motor speed, you need to set EPA or D/R function. Here is a video tutorial for your reference. czcams.com/video/IunGUACFDlo/video.html czcams.com/video/CjvbySByvvw/video.html You can check more details from the detailed manual of RC6GS V3. www.radiolink.com/rc6gsv3_manual If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Lo que no te explican es que cuando vas a frenar frena igual de lento que lo pones para acelerar !!! Si estás usando la opción para drag, preocura que tengas un espacio prudente para
Para frenar
Hi, sir. We have already updated the firmware. When you set the throttle delay, there will be no delay for brake now. Here is the link of the firmware for your reference. www.radiolink.com/rc6gsv3_firmware If any question about RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
how to adjust reverse throttle?
You can set the throttle reverse from the menu "Reverse". there is the user manual of rc6gs v3 for your reference: www.radiolink.com/rc6gsv3_manual_download
@@Radiolink_official thank you
@@Chris-vc1dh Our pleasure. If any question when using RadioLink products please feel free to contact us. Our email is: after_service@radiolink.com.cn
Apa bisa di upgrade ke 6 chanel
Hello, sir. For 4 channel transmitter, sorry you can not update it to 6 channel transmitter by updating the firmware, because there are not 6 switches. Are you using RC4GS V3? Actually, many functions of RC4GS V3 are the same with RC6GS V3, such as THSPD. If any question, you can also send email to after_service@radiolink.com.cn