Thank You Sir that is very Useful for me I Think Your Channel is Like a Treasure For Revit Knowledge. I alway watch and Learn by your video. That is more hleping to impove about Revit Knowledge.
Thanks for tutorial . Only a remark through my work experience, naming areas is always requested by the department you submit your work to when you work in a firm so it is not recommended to delete area names...
for this being of any use I would need to know how to do 2 things- 1) I would have to offset the areas to account for plaster, but without actually having to add plaster to the wall family 2) I need a way to comprehensibly show how the areas were calculated is that possible without add-ons? (and without spending 2 days on setting it up)
I'd be interested also: for my first project, I'm modeling my apartment building: 9 floors, with 4 apartments/floor. I started with the 2nd floor which is the lowest typical floor, using room numbers 201,202,203... For apartment 2A, I just assign all its rooms to the same department. Once the 2nd floor is finished, I'll copy it to floors 3-9. QUESTION 1: if I change room 201 to 301, will all other rooms automatically update? QUESTION 2: if I turn each apartment into a group, and then delete a room from the plan and the schedule, will it update on all floors? Really enjoying all your videos! You make it easy.
Please tell me that i need to create different room schedules. That one is for the ground floor, and one is for the first floor.Editing the ground floor schedule area should not affect the first floor schedule of rooms. how???
Vezano za terasu kad je već spomenuta. Ona se računa u koeficijentu površine. Možda bi bilo zgodno izbaciti video kako računati površinu u koeficijentu (elegantno putem formule). Bitna je stvar, a čini mi se da se nitko toga do sada nije dotakao. Podrška za dalje.
Hi, i have a problem that i want to ask you teacher. When i add object, floor is still can be aviable to see. İ thought to paint it with white but i couldnt. Do you know how can i do it? Thanks allready
Hey, do you know a way to create a floor that is higher than te level? The problem I have is If I place a room on a floor that is 400 mm above the level the tag will show up under the floor, and is not visible...
What if it’s a tall building, how to I separate each unit into a group? Right now I have all rooms and balconies properly separated, but I would like to group each units rooms and balconies into one apartment...
I might misunderstand your question but do as he did on the kitchen walls (quick representation of furniture), he went to wall properties and selected room bounding, so you should only check the ones on the perimeter and then it will count only the total apartment as 1 room, I hope it helps
Awesome bro Love from INDIA🇮🇳
Thank You Sir
that is very Useful for me
I Think Your Channel is Like a Treasure For Revit Knowledge.
I alway watch and Learn by your video.
That is more hleping to impove about Revit Knowledge.
THIS IS ONE OF THE MOST IMPORTANT TOPICS IN REVIT.
Hi
Do u have crack file of revit
I need it please send
Thanks for tutorial . Only a remark through my work experience, naming areas is always requested by the department you submit your work to when you work in a firm so it is not recommended to delete area names...
Hi
Do u have crack file of revit
I need it please
really helpful , great tutorial
Best Teachings Ever
Another amazing video! Thank you Mr Balkan
Thank You Mr Balkan...It is very help full video for me...
Beautifully done. Hope to learn lots more.
Hi
Do u have crack file of revit
I need it please
Absolutely amazing. Thank you again!!!
Hi
Do u have crack file of revit
I need it please
Thank you!
sir very important great videio thanks a lot
Amazing...as always xx
Good explanation is it possible to write the text and dimension of the room together like Living Room (15'-0"x17'-0") .....PLz Suggest...
for this being of any use I would need to know how to do 2 things-
1) I would have to offset the areas to account for plaster, but without actually having to add plaster to the wall family
2) I need a way to comprehensibly show how the areas were calculated
is that possible without add-ons? (and without spending 2 days on setting it up)
good question I was wondering the same hoped you have got your answer
thank you! truly helpful, sir balkan can you also make tutorial on multi level with typical floors showing door, window, rooms, area schedule etc..
Hi
Do u have crack file of revit
I need it please
I'd be interested also: for my first project, I'm modeling my apartment building: 9 floors, with 4 apartments/floor. I started with the 2nd floor which is the lowest typical floor, using room numbers 201,202,203... For apartment 2A, I just assign all its rooms to the same department. Once the 2nd floor is finished, I'll copy it to floors 3-9.
QUESTION 1: if I change room 201 to 301, will all other rooms automatically update?
QUESTION 2: if I turn each apartment into a group, and then delete a room from the plan and the schedule, will it update on all floors?
Really enjoying all your videos! You make it easy.
really helpful
Please tell me that i need to create different room schedules. That one is for the ground floor, and one is for the first floor.Editing the ground floor schedule area should not affect the first floor schedule of rooms. how???
Great tutorial! May you please also explain how to join rooms or change a room boundary AFTER it's created (remove a created room boundary)?
Hi
Do u have crack file of revit
I need it please
@@suficonstruction4396
Go to ThePirateBay. They got lots.
can you do a tutorial how to draw 3d curved facade like shanghai natural history museum perkins+will in revit? pliss😊
Vezano za terasu kad je već spomenuta. Ona se računa u koeficijentu površine. Možda bi bilo zgodno izbaciti video kako računati površinu u koeficijentu (elegantno putem formule). Bitna je stvar, a čini mi se da se nitko toga do sada nije dotakao. Podrška za dalje.
Hi
Do u have crack file of revit
I need it please
bravo 👏 👏
How can I have area with decimals and not whole numbers
The best command is the export for dwg....
Hi, i have a problem that i want to ask you teacher.
When i add object, floor is still can be aviable to see. İ thought to paint it with white but i couldnt. Do you know how can i do it?
Thanks allready
Well done
Hi
Do u have crack file of revit
I need it please
Hello sir. Can I ask if how to change the room separator line into black. Mine is the default color which is sky blue.
Not sure why my rooms boundry gos beyond the walls how can Iedit boundries?
How did u crop the plan plz reply
Was wondering how you adjust height of room boundary if it’s a cathedral ceiling for example
Hi
Do u have crack file of revit
I need it please
Hey, do you know a way to create a floor that is higher than te level? The problem I have is If I place a room on a floor that is 400 mm above the level the tag will show up under the floor, and is not visible...
Hi
Do u have crack file of revit
I need it please
What if it’s a tall building, how to I separate each unit into a group? Right now I have all rooms and balconies properly separated, but I would like to group each units rooms and balconies into one apartment...
I might misunderstand your question but do as he did on the kitchen walls (quick representation of furniture), he went to wall properties and selected room bounding, so you should only check the ones on the perimeter and then it will count only the total apartment as 1 room, I hope it helps
hey balkan ,i kinda have question for you
in this video, talk about area and volumen...
I think likewise, colors scheme for rooms is unprofessional. I prefer black&white.
I dont have room ou area tags....crap progam. In autocad the area is so easily calculated...here we need load tags for everithing...its ridiculous
😘😘😘😘😘😘
👌💐
Best Class Ever
Honestly....this program that should facilitate the process the work, does the exact opposite...where do i have the rroom tabs? ridiculous
Beautifully done. Hope to learn lots more.