it sounds good, one recommendation: reduce the gain and -to compensate that- pump up the volume OR drink water very often, this is to avoid that sticky sound that saliva produce. other than that, sounds good in general (compression, level, eq)
Im a hobbyist pen tester and I love to develop hacking software frameworks and tools. But i dare you to get me wrong, the vibe you get when working with hardware is fr the best
Would a simple oscilator circuit transmitting something resembling a square wave at aprox. 2.45GHz work well as a jammer for WiFi? Or perhaps ramping frequency up and down constantly over whole wifi b/g channels spectrum... If yes, can you "guestimate" approx. how much power would be needed, or how large area would get jammed by, let's say, 1watt output of such transmitter?
That's what I was wondering. You could in theory make a variable frequency oscillator, which would generate a certain wavelength signal, then pass it through a broadband amplifier, and then to an antenna. And then another circuit that controls the oscillator and makes it "sweep" across frequencies. Maybe something like a microcontroller could do this.
You can probably figure out the wattage necessary by looking at the range/wattage of existing routers. My recommendation would be to consider whether or not you want this to be directional or omnidirectional before creating something though.
Checked into the advanced settings on my router, and it turns out it does have a protected management frames option, so I turned it on, and sure enough, deauths no longer work! Thanks Arris Surfboard!
i like that you explain that and not just say here i build a wifijammer noone can use this wifi you get the views and don't care about spreading the correct information.
VOID11 was the Best one. 802.11w Management Frame Protection MFP renders deauth useless on the most part, Support for this is in the ath9k wireless module, so OpenWRT fans with an Atheros chip driven router, activate it… But be prepared that on client side, you need 802.11w support too, so better have a compatible chipset on that side too! but people will find a way to circumvent this as well
That would be the system my school uses... It was annoying as heck trying to set up a quadcopter that uses WiFi for the video downlink when you can't connect to the network it broadcasts. Talked to the system admin after a while and he said it was his system blocking it so it wasn't just me being crazy. Is this legal compared to jamming or how do they get away with doing it?
Can you do a video on the termux app for android. I have no idea how to use it and whenever i find a video about the termux, the person is usually speaking in a different language which i dont understand.
Benn Kern There is a timout checkbox in settings, change that to another number representing seconds or set it to zero to apply no timeout. Happy Becon Spamming!
Hello! My ESP8266 which i programed to be a "jammer" using your tutorial. But if i for example start a beacon list. It will stop after like 4 minutes. And i dont know why, so do you or anyone else here in the commenst have any idea how to fix it like for example write a code? Best regards!
actually you can hide you wireless networks so that the public cant see it and in turn it cant be Deauthered only trouble is its harder to get new users on the wifi network
Let me help you: 1. Put your wlan card in monitor mode make sure to add check-kill 2. Run airodump and look for networks with the name something like 3. Run a deauth attack on that bssid so all clients would be kicked off (in separate terminal) 4. Simultaneous to 3 keep running airodump and as clients reconnect you will see change to the ssid. Profit.
Johnny9 you do realise that all tools these days monitor both SSID Beacons and Client Probes. You can disable the SSID Beacons sure, but the moment a client wanders in range and attempts to connect, it yells out the SSID just as loudly. Kismet for example will listen to this and "unhide" "hidden" SSID networks.
I know it's 6 months after you've posted this comment and I haven't seen this comment before. A deauthor can disconnect a device from the wi-fi and if it's already been booted offline how much more offline could it be?
Only in my vehicle when I turn on my WiFi does a certain hotspot pop up. In a year of having it it has never. Does this sound like someone has put something in my vehicle to track or connect to my phone and steal my data?? Please help I need someone smart that knows something more.
@@colinhabursky9037 ok thx. but can i deauther a wireless connection between laptop and a router connected wirelessly, but the router is used as an amplifier(also connected wirelessly to the main router with a switch).
What is the benefit of doing this via the command prompt? Deleting via the GUI does exactly the same thing in the kernel of Windows. And no, there is no real MS-DOS since windows 7 or so.
@@Engineer9736 no it doesn't. You can't delete many folders in windows. One example is winsxs etc. But I think this one even can't be deleted using the command prompt, only via f. Ex. Linux
Make video on Windows Wifi deauther. I have Auth9k chipset wifi card and I want to try deauth attack from Windows. In kali Linux it works flawlessly. I have two NodeMCU deauthers. I just want to try on Windows because I heard windows driver support is very poor but still commview custom drivers enable promiscuous mode somhow (idk bout packet injection), just for educational purposes :)
awesome seytonic few mins ago i finding in google this u read my mind... hahaha, with nodemcu can do an LINSET attack (desauth a concret wireless user, and make a fake wireless(my nodemcu) without password connect it and give the correct password)... xd LINSET ATTACK! xd
Maybe not where you are. Here, we have special cops that do just that. Caught a man with a cell phone jammer on the bus. He didn't like people talking on their phone in his presence. Hand cuffed him and took him to the farm upstate. Wifi is even easier to catch if people complain to the police. They come and triangulate your position to your door step.
Hey guys when performing a dos on a router the first thing is checking the mac address. You can change it constantly or hide the routers mac address(some router can) and boom problem solved!
Btw I got a new mic, so let me know how it sounds.
It sounds good.
Seytonic it sounds the same. I hope you didn’t spend a lot of money on it.
it sounds good, one recommendation: reduce the gain and -to compensate that- pump up the volume OR drink water very often, this is to avoid that sticky sound that saliva produce.
other than that, sounds good in general (compression, level, eq)
Seytonic you mic is sounding same
+Lilwiggy productions Nice troll.
you can protect yourself by using Ethernet wires rather than wifi
well then someone can just use a ethernet monitoring tap or sth else ethernet is just as weak as wifi in terms of security
you could just spam fake arp responses
Scissors.
Im a hobbyist pen tester and I love to develop hacking software frameworks and tools. But i dare you to get me wrong, the vibe you get when working with hardware is fr the best
Yeah, but what's the WiFi jammer password though?
Sam van der Kris You can find it on the deauther's site
Eryk Hanx whoosh
Sam van der Kris he was just trying to help
@@2000jago (he was making a joke)
the default password is deauther
ASUS routers have an option under advance settings to protect management frames .
does it help
Would a simple oscilator circuit transmitting something resembling a square wave at aprox. 2.45GHz work well as a jammer for WiFi? Or perhaps ramping frequency up and down constantly over whole wifi b/g channels spectrum...
If yes, can you "guestimate" approx. how much power would be needed, or how large area would get jammed by, let's say, 1watt output of such transmitter?
That's what I was wondering. You could in theory make a variable frequency oscillator, which would generate a certain wavelength signal, then pass it through a broadband amplifier, and then to an antenna. And then another circuit that controls the oscillator and makes it "sweep" across frequencies. Maybe something like a microcontroller could do this.
You can probably figure out the wattage necessary by looking at the range/wattage of existing routers. My recommendation would be to consider whether or not you want this to be directional or omnidirectional before creating something though.
Checked into the advanced settings on my router, and it turns out it does have a protected management frames option, so I turned it on, and sure enough, deauths no longer work! Thanks Arris Surfboard!
What router do you use?
i like that you explain that and not just say here i build a wifijammer noone can use this wifi you get the views and don't care about spreading the correct information.
I assume that the deauthers can not only block unauthorized devices, but also identify their locations, ip numbers, etc. Doesn't it?
Sounds good. The old videos sounded good but I do hear about 10 to 20% clearer
Deauth for 5.8Ghz soon?
kevin rex yaaaaas
😍
you mean as in 5.8 ghz fpv?
So , in some countries people call Routers “rooters”?
VOID11 was the Best one. 802.11w Management Frame Protection MFP renders deauth useless on the most part, Support for this is in the ath9k wireless module, so OpenWRT fans with an Atheros chip driven router, activate it… But be prepared that on
client side, you need 802.11w support too, so better have a compatible
chipset on that side too! but people will find a way to circumvent this as well
Can you deauther a WiFi jammer tho.
Oof
*So these only work on 2.4ghz?*
yes
That would be the system my school uses... It was annoying as heck trying to set up a quadcopter that uses WiFi for the video downlink when you can't connect to the network it broadcasts. Talked to the system admin after a while and he said it was his system blocking it so it wasn't just me being crazy. Is this legal compared to jamming or how do they get away with doing it?
Eman2000 schools can do whatever they want with their networks. also you have no rights in a school.
circuit esp32D my circuit only shows red light and the phone does not show strong wifi. Please guide me how to fix it. thank you
Thank you so much i got to know how it works and i made one ;-)
what's the radius covered from the "nodemcu cp2102 8266" ??
Can you do a video on the termux app for android. I have no idea how to use it and whenever i find a video about the termux, the person is usually speaking in a different language which i dont understand.
Hey Seytonic. you should do a video on how to make an external/better antenna for the nodemcu esp8266 : )
get an esp-07, comes with an external antenna port.
I already knew the difference but watched the entire video anyways
I bought a LTE Hotspot today and it got WLAN Protected Management Frames (or PMF). I´m pretty surprised.
Note that openwrt custom router firmware supports 802.11w.
Jakktutorials sent me BTW u earned a subscriber
could you do a tutorial on isdt charger? for lipos
i have a problem when i start the beacon spam or the death the chip crash after exatcly 5 min pl help i come from germany???!!!???
Benn Kern There is a timout checkbox in settings, change that to another number representing seconds or set it to zero to apply no timeout. Happy Becon Spamming!
nice thanks you are my hero
wifi deauther pretty much only work on 2.4Ghz? Is 5Ghz safe then?
yes
Nice video. When you try make a keylogger with arduino micro?
Does it also works on routers with captive portals?
Hafid El
Hello! My ESP8266 which i programed to be a "jammer" using your tutorial. But if i for example start a beacon list. It will stop after like 4 minutes. And i dont know why, so do you or anyone else here in the commenst have any idea how to fix it like for example write a code? Best regards!
Can I reuse it normally after use it as a jammer?
Im pretty new to all this but, how do I get the root@kali thing?
Hey please make a video on the wemos
GUYS GUYS The password is : JAMMEEER
Did you know that Malduino...
So which is better?
The Problem is the OSI Layer 8 ...
actually you can hide you wireless networks so that the public cant see it and in turn it cant be Deauthered only trouble is its harder to get new users on the wifi network
Johnny9 What do you mean by saying harder? It requires only one more input from you.
@eryk i guess its harder as you have to manually type out the whole wireless network name correctly instead to just entering and typing the password
Johnny9 But assuming you would have set hard SSID
Let me help you:
1. Put your wlan card in monitor mode make sure to add check-kill
2. Run airodump and look for networks with the name something like
3. Run a deauth attack on that bssid so all clients would be kicked off (in separate terminal)
4. Simultaneous to 3 keep running airodump and as clients reconnect you will see change to the ssid.
Profit.
Johnny9 you do realise that all tools these days monitor both SSID Beacons and Client Probes.
You can disable the SSID Beacons sure, but the moment a client wanders in range and attempts to connect, it yells out the SSID just as loudly. Kismet for example will listen to this and "unhide" "hidden" SSID networks.
Does having multiple deauthers running at the same time increase the effect?
I know it's 6 months after you've posted this comment and I haven't seen this comment before. A deauthor can disconnect a device from the wi-fi and if it's already been booted offline how much more offline could it be?
Only in my vehicle when I turn on my WiFi does a certain hotspot pop up. In a year of having it it has never. Does this sound like someone has put something in my vehicle to track or connect to my phone and steal my data?? Please help I need someone smart that knows something more.
Park car down the street come back to where car was parked scan for wifi if it shows up then not in car but if it dont.....
@@readabookwithdaddy3055 car got totalled in December. Thanks for the late reply.also phone is hacked as well
It's always good fun to perform a deauth attack on kali at starbucks for about a minute. Looking at the confused faces always gets a laugh out of me.
Do apps for android like arcais netcut or wifikill use the same steps?
Mose Bejarano I don’t know about those but an app on the iPhone uses arpsoofing (mimicking MAC addresses)
Just waited for this :)
You should do a tutorial on how to actually change someone's wallpaper with a badusb because that would be fun af and I can't find a tutorial.
If you dont know how, maybe you shouldn’t be doing it at all? Why would you mess with anybody’s computer like an asshole?
@@StopFear StopFear? More like... StopFun!
Cant you just deauther WiFi secruity cameras, or shut down a whole smart - home ?
Secured networks are of no interwst to TPTB.
Does someone know if i can turn on/turn off rf controlled lights etc with the raspberry pi fm transmitter???im first! Pls help!very good video!!👏👏
Remo Crapstuff Seems doable. Look this up in google 'raspbery pi fm radio comunication'
can a deauther work with a LAN network, like a router connected to a switch and then use a WLAN. plz reply to me. i need this knowledge.
Imperial Recker no sorry it only works on wireless devices and it also only works on 2.4ghz WiFi not 5.8ghz
@@colinhabursky9037 ok thx. but can i deauther a wireless connection between laptop and a router connected wirelessly, but the router is used as an amplifier(also connected wirelessly to the main router with a switch).
Ya I think you can still Deauth ur laptop
@@colinhabursky9037 ok thx for the knowledge. i am going to mass deauther my school.😂😂😂
Imperial Recker ya I wanna do that too (I am 13) but if u watched the video he said most enterprise networks can’t be Deauthed
BUT the question is
WHAT THE FUCK IS THE PASSWORD ???
goddamn i get ur clueless but look on the github
ƒuck please tell me you are joking
great video
lol dude I knew that, anyone that has ever used the airmon-ng utility suite should've figured that out
Dont. Thank God this video isn't just for you then!
hear**
Thanks!
Nice video man
Great video!
Does someone know if i can turn on/turn off rf controlled lights etc with the raspberry pi fm transmitter???
lethargic Seems doable. Look this up in google 'raspbery pi fm radio comunication'
couldnt you just deauth someone with a wifi card in kali with aireplay?
yes
I have found a very good cooler for the chip on amazon would recommend to everyone. Maybe you can imagine that in a viedo
LEDE is a router firmware that ships with 802.11w enabled. But it only works on about ~20% of routers.
_The link to your Deauther video:_
*VIDEO UNAVAILABLE.*
Am stuk, whats the jammer password? I’m suck.... also where do I plug the Wemos DI mini into the MCU?
Why is there my code in here
Guys I know it might come as a shock, but Corey in the house isn’t an anime.
LIES
IT IS
What if anime isn’t anime and non anime is anime. Therefore, Cory in the house is anime .... 🤔
NeoFeenix _ wiggy for PRESIDENT!
It really makes you think. 🤔🤔🤔🤔
JUST GO TO THE COMMAND PROMPT AND DELETE SYSTEM32
Yeah and then you can't even have a pc
@@zhaoruiniu23 sure. Just use Linux
I have ubuntu linux ind i can use aircrack
What is the benefit of doing this via the command prompt? Deleting via the GUI does exactly the same thing in the kernel of Windows. And no, there is no real MS-DOS since windows 7 or so.
@@Engineer9736 no it doesn't. You can't delete many folders in windows. One example is winsxs etc. But I think this one even can't be deleted using the command prompt, only via f. Ex. Linux
Pls make a wifi dopescope!!!!!!!!with deauther and monitor mode!!!!!!!
My name is Seytonic, Malduinos stay poppin. Yes I can hack, no I'm not mr. Robot. England is my city and you know this meme's over.
Vector Reyes lol nice one
Make video on Windows Wifi deauther. I have Auth9k chipset wifi card and I want to try deauth attack from Windows. In kali Linux it works flawlessly. I have two NodeMCU deauthers. I just want to try on Windows because I heard windows driver support is very poor but still commview custom drivers enable promiscuous mode somhow (idk bout packet injection), just for educational purposes :)
Szczerze to nigdy nawet nie byłem 😂 to się opierało na złych założenia i jedyne co możecie mi zrobic to mnie zabić albo zmianic zawodnika. Proste
The disclaimer in the description always makes me piss my pants a little
awesome seytonic few mins ago i finding in google this u read my mind... hahaha, with nodemcu can do an LINSET attack (desauth a concret wireless user, and make a fake wireless(my nodemcu) without password connect it and give the correct password)... xd LINSET ATTACK! xd
Hi
credit card rfid skimming?
What about it? You’re just throwing up random words unrelated to the video?
But this deauther never works for me with an Apple Device. (On my FritzBox router). On Android and Windows it works. Why?
I experienced the same. I`m curious about it too.
seytonic likes anime?
Don't.
+Seytonic lol
+Seytonic lol
cool
Seytonics my dad
What the hell is a rooter?
The real word for router
damn you sound better!
SO I CAN USE MY PHONE AS A DEAUTHER?!?!?!
yes
❤❤❤
or 1st ... IDK : )
if i can't auth, i can't fucken get a lan ip!
Will they kick people connected with ethernet?
billna billy no
#DiscordGangg
Hi Discord!!
Use this if you want to end up in jail.
Nobody can really track you down when you do this though. Basically unknown.
Maybe not where you are. Here, we have special cops that do just that. Caught a man with a cell phone jammer on the bus. He didn't like people talking on their phone in his presence. Hand cuffed him and took him to the farm upstate.
Wifi is even easier to catch if people complain to the police. They come and triangulate your position to your door step.
Hey guys when performing a dos on a router the first thing is checking the mac address. You can change it constantly or hide the routers mac address(some router can) and boom problem solved!
4th : _ )
Them dank memz
First 💗
sick of yr malduino thing..
naveen kumar BOOOOO
SICK OF YOU COMPLAINERS!