I have just bought a 2005 sequoia and am working through getting it road-ready. It is a Canadian car, so the frame has some surface rust. Fortunately no frame rot. It has a very hard black coating that is chipped in places and some rust is coming through in places. I scaled off a section using a cold chisel and then used a metal braided wire wheel on the frame. I used some rust converter liquid and actually it looks very good. I will paint it with POR 15. It will be a herculean task to do the whole frame and also fix the bit of rust in the wheel wells but well worth it and c'est la vie. Then I will have to fix the rear hatch that won't open, repaint rims, clean and detail, change all the fluids, finish doing the rear brakes, polish the headlights, and think about changing the spark plugs. I'm not sure how difficult it is on the 8 cylinder engine to access them and remove them for inspection and I don't know when they were done. Thanks for the great videos! Long-time subscriber and I also have a 2006 Camry with the 2AZ-FE in the family.
Could you go from up under the truck directly to where the tool need to go? Reason i asked is because we seen the view of the tool from the inside going to the outside of the truck where the spot for the tool goes.
What’s ur thoughts on the interstate batteries ? Been seeing a lot of negative reviews about um and how Costco changed the warranty to pro rated…been thinking of going to Walmart to buy a batteryeverstart
Why did you even start to make this video if you didn't have the tools? I don't know if you got it changed or not because I quit watching when you said you didn't have the tools.
I have just bought a 2005 sequoia and am working through getting it road-ready. It is a Canadian car, so the frame has some surface rust. Fortunately no frame rot. It has a very hard black coating that is chipped in places and some rust is coming through in places. I scaled off a section using a cold chisel and then used a metal braided wire wheel on the frame. I used some rust converter liquid and actually it looks very good. I will paint it with POR 15. It will be a herculean task to do the whole frame and also fix the bit of rust in the wheel wells but well worth it and c'est la vie.
Then I will have to fix the rear hatch that won't open, repaint rims, clean and detail, change all the fluids, finish doing the rear brakes, polish the headlights, and think about changing the spark plugs. I'm not sure how difficult it is on the 8 cylinder engine to access them and remove them for inspection and I don't know when they were done.
Thanks for the great videos! Long-time subscriber and I also have a 2006 Camry with the 2AZ-FE in the family.
Much Thanks. Just bought a sequoia and wouldn't you know, no tools. Great tip
Thank you for this video. I bought my 2003 Sequoia realize the spare was flat.
Didn't know where the tool was located to lower the spare.
Fresh squeezed IPA from Deschutes brewery and you drive a Toyota? You have good taste sir.
WOW I wouldn't have figured it out by my self . Thanks for the video
Thank you! Saved my sanity.
Thank you this video just saved me
3 years later 😊 thank you very much! BTW I am exact opposite lol I'm missing the bottle jack..
You can used the extension of the floor jack .
I was today's years old when I fought out this.....thanks 🎉🎉🎉🎉🎉🎉🎉🎉
Thank you! Mysteries avoided!
Could you go from up under the truck directly to where the tool need to go? Reason i asked is because we seen the view of the tool from the inside going to the outside of the truck where the spot for the tool goes.
Hi, Could you please let me know what size exstension rod I need for my 2004 Sequoia SR5 base.
The dealer wants 165.00 over here..WOW.
My first gen tundra is the same. Luckily I have the tools that came with the vehicle when I bought it from the prev owner.
good for you...I need to buy it soon
Nice
Good Job! I always enjoy your videos.
Thank you
What’s ur thoughts on the interstate batteries ? Been seeing a lot of negative reviews about um and how Costco changed the warranty to pro rated…been thinking of going to Walmart to buy a batteryeverstart
Okay, any idea how to ADJUST headlight beam pattern on 2005 Sequoia??
3/8 Extension but how long? is it the 18inch or the 24inch? please help before i buy it
Thanks for sharing this video.
Great video, thanks my friend!!
AWESOME! Just what I was searching for! Many thanks!
my pleasure
That’s a great truck 👍
I just bought mine 195k. 04' 4800.00
Just bought mine also 2002
I really hate spare tires on trucks bc they are so complicated too take off 😫
thanks for videos
Great vlog thank you!
Do you lubricate the chain that holds the tires?
Good ! I like it .
Tell me more about sequioa!
How do you get the 2nd right seat up to access the tool box?
Hello do you have the link to buy this kit with the wrenches to remove the tire? Thanks
Hey! Thanks 4 the info. Whats the tow cap??
Really helpful
My friend.I have question.
How many psi recommend Toyota on spare tire for Toyota sequoia 2005?
Check the tire pressure on the drivers door jam. If the front and rear are different pressures, inflate to the higher of the two.
It's hilarious that you need SAE 3/8th extension for a metric system tools and parts. Lol why not use a 9.5mm extension?
Is it the same for a 2003?
Yes, all first gen Sequoias (2001-2007) are the same.
Squeeze some lube in that cable bud
Why did you even start to make this video if you didn't have the tools? I don't know if you got it changed or not because I quit watching when you said you didn't have the tools.
Fuckiiiiiinnnng boooooooring