One of the cleanest and most tastefully done bikes I’ve seen. Only thing I disagreed with was you wanting to paint it. It look great in the color. AWSOME job brother
Beautiful🎉. I just came across your channel in my feed actually. I'm happy to support you and other fellow content creators. I look forward to seeing more from you in the future. Keep up the great work and ride safe out there.
Your bike is inspiring my build. It’s beautiful. I’m about to pull the trigger on the continental tire… so just to be clear, that 130/70-18 is basically getting stretched on that 4.5” wide wheel for the super thin profile ? it’s definitely a 130 tire ?
Damn nice looking bike, Chicano Yank. Does your bike ride hard since the wheels are low profile? I intend to put a 21 in the front and an 18 in the rear, so that's why I asked. I rode to Sturgis back in 2012 when my bike was stock and it rode nice with stock wheels. I was wondering how the ride will be once I install low profile wheels. Thanks for the video. As I said earlier, that's one damn nice looking ride.
@@ChicanoYankTV yeah got you mate on that one. I was wondering though how they fit under the clamp cover? I've seen stepped bars that don't quite fit under the cover plate and need a little shaving around the loop area.
I use Polk up fron in the 4” pods that I made custom housing for. The rear is diamond audio 6x9 mid base with a tweeter. I run a 1000 watt 5 channel amp. Sounds amazing
Two questions Did you trim the curves in the bag fillers yourself or did you buy them like that to allow the bag rail mounting to not hit ? Did you say pearl one grips or pro 1 ? What grips are those… they’re fantastic looking.
Way way past beautiful. This is perfection.
Bad ass looking bagger. Love everything you have done!
Nice build, I like the original work you did. She's one of a kind and looking fine!
Very nice Amigo.. From South of El Boarder Ireland 🇮🇪👍🏻
One sweet ride it's gorgeous
One of the cleanest and most tastefully done bikes I’ve seen. Only thing I disagreed with was you wanting to paint it. It look great in the color. AWSOME job brother
I think the revised look is way better. go to chicanoyank on IG to see updated pics
That's a stunner! Well done.
Esta Perrona carnal 👍👍👍
Beautiful bike, I love everything about it. I wouldn't do anything different. My idea of perfection in a King!
Beautiful🎉. I just came across your channel in my feed actually. I'm happy to support you and other fellow content creators. I look forward to seeing more from you in the future. Keep up the great work and ride safe out there.
Wow man, very nice.
Looks great Bro. Nice Job!
Beautiful Bike!🔥🔥🔥
Looks awesome
Really nice work
Sweet
Looks good, like the color
I'm currently looking at the Road Kings.
beautiful bile brother ! one of the best put there. whats the part number on the burly bars ?
My Road king its black
Yeah Man...nice bike.
Like your vicla bro I got the road king classic I got to cholo it out got to get the new tires mine are 15 years old.
Sweet ride
Hello From Brasil
Un saludo desde españa
Bad ass bike
Your bike is inspiring my build. It’s beautiful. I’m about to pull the trigger on the continental tire… so just to be clear, that 130/70-18 is basically getting stretched on that 4.5” wide wheel for the super thin profile ? it’s definitely a 130 tire ?
Yes
Man can you help me do all that to mine? Looks Great!
Of course
nice one
Beautiful man what size and brand are both tires? Also on your air ride where did you order frm n brand ??? Let me know thank you
21 up front with Shinko 90/90
The rear is an 18x4.24 and a Shinko 130/70 18
Drove through a Pep Boys with a magnet. Tacky.
Liol that’s pretty funny.
Damn nice looking bike, Chicano Yank. Does your bike ride hard since the wheels are low profile? I intend to put a 21 in the front and an 18 in the rear, so that's why I asked. I rode to Sturgis back in 2012 when my bike was stock and it rode nice with stock wheels. I was wondering how the ride will be once I install low profile wheels. Thanks for the video. As I said earlier, that's one damn nice looking ride.
it rides great but I do have air ride front and back. I rode to Oregon with this set up
What brand is the air ride suspension. I’d like a quiet one like that for my bike
@cedillocustoms
What was involved to get the bag rails lower ?
Just building a bracket where the rail connects to by the bags to lowere the mounting poin like 3 inches
Is it for sale?
what length fish tails? The bike is sharp!!!!!!!
those are 36” but I did a complete makeover on the bike and it now has 42” pipes with extended bags and new paint.
Hey mate, just wondering if you had to shave the clamp cover when you put those 1.25 bars in?
No brother they are stepped meaning the center portion of the bars are 1” in diameter so you can use stock risers
@@ChicanoYankTV yeah got you mate on that one. I was wondering though how they fit under the clamp cover? I've seen stepped bars that don't quite fit under the cover plate and need a little shaving around the loop area.
What kind of speakers did u use are they loud?
I use Polk up fron in the 4” pods that I made custom housing for. The rear is diamond audio 6x9 mid base with a tweeter. I run a 1000 watt 5 channel amp. Sounds amazing
4 channel
@Chicano Yank TV Super mods brother! Where did you get the chrome handlebar controls? thnk you
drag specialties
What Is The Brand Of Air Ride System ?
custom made by Cedillo customs in Sacramento California
Sick. Can you show how you dropped the bag guards
The previous videos shows how I did it
That is a good looking Harley. I have a 2006 Road King like yours. mine is blue. Where can I get bag guards?
These are harley own part but really hard to find China makes a knock off but they are normally crap
Hey thanks for the imput. My question is the name brand of your seat an ware can I find them thanks
It was custom made through Long Beach custom baggers
what length chromite cables did you use? stock or +2
I can’t remember exactly but I think they were 4” over stock. the bars are 39” and they run through the nacelle
Me Like the Seat.. who makes it? ME WANT!!
that’s Long Beach bagger the had them made I won it in a raffle
What brand front wheel is that and where did you purchase it from? Thanks!
The rim is a 60 spoke 21x3 from dna. The tire is a metzler mh90.
I got them on ebay
@@ChicanoYankTV Thanks!
Is that a 60 spoke front? Nice ride man
Yes the rims are 60 spoke 21x3 and 18x4.25
Lets say I wanna bike like this can I just buy it or do you guys build this on your oown from the groud up? Nice bike man👍👍‼️
both
Hey Bro. Hope I didn't miss it but what size continental tire is on front. I love the look.
The continental tire is on the back. It is a front tire 130/70 18. I use an 18x4.25 rim on the back. The front is a 21x3.5
@@ChicanoYankTV hey thanks but what is the front tire size is it 120 70 21
No I run an MH90
@@ChicanoYankTV hey thanks homie. Much appreciate you .an your Horse most Beautiful
21” mh90
@chicanoyanktv What's the brand of bar and seat do you have?
burley beach bars 1.25” the seat is from king beach baggers
Nice bike, the video moves too much?
Are those beach bars or bikini beach bars by Burley?
Thanks
39 beach bars not bikini beach bars
@@ChicanoYankTV thanks buddy, iam planing to put the same on mine.
U got bad ass bike
whats the Rise on the Hurley Bars?
1 inch
Firme af
Two questions
Did you trim the curves in the bag fillers yourself or did you buy them like that to allow the bag rail mounting to not hit ?
Did you say pearl one grips or pro 1 ?
What grips are those… they’re fantastic looking.
Bought them like that
Ok
And the grips ?
Those are pro one chrome grips
What size is the rear tire ?
It’s an 18x4.25
I am running a 130/70 18
Can you tell me where to get that rear wheel
Please ?
Try eBay, DNA specialties or KC International
I am seeing only 18x3.5
Are you 100% sure it’s 4.25 wide ?
E
P
nice, but you can't park it any where for fear that some one will like it more than you
Nice bike! But looks like every other Harley slathered in chrome .The chrome look is played out. Dare to be different!!!
I wish ed those Burley Bars would work on my Road King. They wont work with fly by wire.
they are burley but I’m sure they make fly by wire bars too