Forward Facing Hyundai Mitre saw - Any Good?
Vložit
- čas přidán 20. 08. 2024
- An affordable mitre saw with forward facing rails from Hyundai?! Let’s find out if it’s any good.
Hyundai did send me this with no charge but did not have any influence in this first impressions video. These are purely my thoughts and opinions and I get no financial rewards if you use my code.
If you want to look into one further - hyundaipowereq...
And use the code WWJ5 to get a small discount (look after the pennies!)
Channel supporters:
Forgefix - www.forgefix.co.uk
Forgefast - www.forgefastelite.com
Ebrasives for abrasives and use code WWJ5 for a discount - ebrasives.com/
Stuff I use - Amazon Affiliate links
amzn.to/3nBpTv4
My links - linktr.ee/wood...
Contact me:
Email - info@woodworkjourney.com
Instagram - woodwork_journey
Website - www.woodworkjourney.com
If you want to check out my 2000w version or the 1500 go here and use WWJ5 if you want a discount hyundaipowerequipment.co.uk/tools-construction/hyundai-2000w-electric-mitre-saw-chop-saw-with-255mm-blade-230v-hyms2000e/
Caveat: I have not been paid to advertise and receive no payment if you use my code
Just used this when buying the 1500w, big thanks
I hope you love it as much as I do!
We have seen some great feedback from our mitre saws, but we have taken notes of some of the feedback you have provided and will apply them going forward. It is really good to hear you have an overall sense of confidence in our product!
I am new to DIY and have only built the confidence to work with wood over the past few years. Most of my tools are Makita and I was going to spend almost double on a Makita mitre saw. But then I watched this video and bought the Hyundai. I have used it twice, the second time getting better results, and I think it is more than good enough for what I will ever need. I was really impressed. Thanks for helping me make the right choice.
Hi Dean. Great review, so good in fact I bought the saw.
When you were referring to not being able to make adjustments to the blade angle once the saw is locked in to one of the predefined regular positions eg 90, 45, 30 deg etc ….. I think you had already solved that problem when you set the fence angle.
If you lock the table in the 90 deg cut position, then square the blade to the back fence you have in effect set all predefined positions. Hope that makes sense. Thanks for the review.
You’re absolutely correct, but you are putting faith in the original machining, that a painted part isn’t too thick, etc etc. luckily this saw is pretty awesome and doing a brilliant job in my workshop
Hi Dean. i am an amateur DIY/Hobbyist and enjoy making things in my garage, after watching your review i have now ordered the Hyundai HYMS2000E miter saw. Hyundai have there Black Friday deals on at the moment and with your discount code, it was a real good bargain. looking forward to trying it out when it arrives.
thank again,
Awesome! I hope you like it as much as I do!
I bought this chopsaw 2 weeks ago (used your discount code too 👌😉) was looking gor something affordable after finally having enough of my over repaired 10 year old makita and im more than impresed.
Cuts square, slides beautifully and isnt too noisy tbf
Awesome saw and review…. Cheers wwj
That was very interesting, thank you. I'm now favouring this over the Evolution 255.
Looks decent for the price. I've got a cheap Screwfix Titan mitre saw with a Freud cross cut high tooth count blade. Does a good enough job for now.
I really don't understand why most manufacturers don't spend a little more time on the dust collection problem!
As far as I can see, it's a fairly easy fix with a simple rummer 'skirt'. I made one with card, covered with duct tape, which directs most of the dust up into the vaccum hose. Not perfect but I'd estimate it catches at least 70-80% more than the tiny standard boot. I don't want a giant box behind the saw for the sake of a bit of dust. As long as it's not giant clouds, I'm happy to hoover up the loose stuff when I tidy up at the end of the day.
Such a cheap & simple fix for manufacturers to include as standard. It baffles me why the all seem to neglect it!
It’s unfortunate that there’s not one company that works on it
Finally someone's done a review for this saw.
You are most welcome 😁
Thanks for the review, ordered one now.
The fact that @HPPUK have responded and seem to take things on board definitely influenced my decision. Downloaded the manual and now there is a page about zeroing the blade, and it also mentions a bolt and nut like you've done to allow trenching.
That’s awesome!
Great review, especially wrt all the possible adjustments, which are sometimes lacking but essential. Looks like a very usable tool. I like how you immediately start customizing.
Replacing that grubscrew with a bolt and locking nut is perfect. I would have maybe liked to see a little bit more “action” and various cut results - those picture frames were a good show.
Hi! Great review! I wasn't sure what chop saw to get as my first one but after watching you video I no longer have that problem 😊 I have just placed the preorder, Thanks!
Glad I could help!
Hi Dean I bought this model 3 months ago and very happy with it. I will put a bolt in as depth guide.
Regards Bill
Cheers Bill!
I bought this saw a couple of weeks ago and my one comes with an adjustable depth stop just like your bolt, but with thumb screws - there is still a grub screw underneath to set the maximum depth - so already implemented your improvement!
Hi Dean. I've not long bought the Excel version of this saw and it is basically identical apart from the colour scheme. I agree that the dust collection is totally crap but as you say it's a brilliant piece of kit for a small workshop. Great vid as always mate.
Thanks Gaz!
Bought one recently so great to see you talk about it and will take some of your ideas on board. As you say great piece of kit for a great price 👍👍
Definitely a good addition to the workshop
Good value. The price of some saws that were released 10 years ago are currently ridiculous. Saws that were £400 when released are now over £600
An honest review - much appreciated! Great ideas on the dust collection and the trenching bolt. This was quite informative Dean - cheers!
Thanks Chip! I’m pleased you liked it 😊
I recently purchased a different brand and I really like the front rails on that one.
Looks like a nice saw for the price.
Nice to see another video from you. Take care
Thanks!
I'm enjoying the home made boot! I'll make one of those for sure!
I like the forward facing guide rails, the saw seems mostly like the verity of other models on the market but I'm still impressed overall and like yourself Dean I've changes one or two things on my saw to suit my needs but your dust boot is very effective though, I'll be looking at doing something so simple and effective on my mitre saw, Thank you Dean.
Thanks! I really like this saw and anything that makes 45 degree mitres more painless is good in my books lol
Check out this video from Inspire Woodcraft, it’s where I got the idea for mine czcams.com/video/7HID6YleVsg/video.html
@@WoodworkJourney Thanks Dean.
Great review, that's why I got my small hikoki because of the fixed rails. Your modification with the dust thingy made a big difference might see if I can do something similar
Check out the inspire Woodcraft channel, he was where I got the boot idea
Good review of a good saw, apparently not yet available in the U.S. (They'd have to invest in a different measurement scale, formerly referred to as "Imperial" measure--guess that's not true anymore!)
I really like my SKIL 10-inch SCMS, though it has rearward rails; I have room for them. Had to add a larger dust boot also, which works extremely well. Thanks, Dean!
Thank YOU! 😊
I've never bought a power saw that I did not have to square it up since the 80's. Seems to me that people in manufacturing this equipment could take a few minutes and do it so you could pop it out of the box and start using it. It used to be that way, but in the 80's it changed.
I think with global shipping these days products get banged about and have multiple temperature changes which will expand and contract the metal a little. All of that throws things out of whack, or soft isn’t tightened so when it gets to us it isn’t broken or impossible to undo.
Oohh, sponsored power tools! Nice! Does this mean you are one step closer to becoming a CZcams Influencer Millionaire?
Joking aside: that was mighty decent of Hyundai to send you this! Cheers mate, happy woodworking!
BTW: made the same adjustment for the trenching feature on my Bosch mitre saw. Don't know why it does not just come like this from the factury?
LOL nah no money involved and not sponsored, just sent to review. I’m very happy I have it, particularly as it’s not something I would have searched for.
Great to hear you can do the same mod on your saw! 😊
@@WoodworkJourney Either way: nice to have a decent mitre saw! Anything else on your immediate wish list?
Excellent review Dean. I have been thinking about a new chop-saw, but didn't want to spend the earth on one. The Hyundai at this price (plus your discount of course) looks like the way to go. Thank you very much and hope to see more from you soon.
Thank you Stewart! There’s always the smaller one as well. I’m really happy with it though
Looks like a interesting saw that. Dust extraction on my cordless festool with the bag is a joke so that’s not doing bad.
Great mod on the boot. Certainly made it miles better. Looks a great saw for little money.
Thanks! Bonkers that you have that experience with the Festool, wayway beyond my budget but I thought they were supposed to be the best for dust collection!
@@WoodworkJourney don’t get me wrong with a extractor it’s better than most but with the bag forget it. Hope the saw serves you well.
Keep up the great videos 👍
Seems to be a decent saw for the price point. As for dust collection, you really can't go past a cabinet with a hefty dust extractor to keep the mess to a minimum.
Nice bit of kit, thanks for the video, very informative. 🛠️
Thank you Arthur
Nice review Dean. It beats my evolution saw. Love the boot extension idea. That made a significant impact and I'll try to do something similar on my machine.
Forward facing is great but I suspect the way the bag sticks out kinda negates the benefit to some extent.
Yeah I had an evolution for a long time, this is more accurate in my opinion.
I never use the bag normally as it gets to my dust collection, I was just showing the difference in boot design. It definitely saves a hell of a lot of space
Hi, the indents you mention which you lock into when moving the mitre to cut set angles are not meant to be adjustable! They are set and MUST not be allowed to be changed by design. Changing the fence is how you get perfect right angles. Once you have done this, then all the indented slots 'should' be dead on accurate. If they are not then send the machine away for your money back. However, you show that it is accurate with your frame mitre cuts, so all good there then!
Good honest review.
Question - what is the max depth of cut for a skiting board in the upright cutting position (i.e. not laid down using the sliding-cut features)?
Seems very good value and great that it’s got the forward facing bars. I watched the Inspire video the other day & he’s achieved a great improvement on his saw, unfortunately I don’t seem to have a lot of room on my Makita to do something similar ☹️.
Never say never! With a roll of gaffa tape and a can do attitude you can conquer the world! Lol
@@WoodworkJourney 😂
Thank you for sharing …. I’m about to buy one. 👍 happy New Year 🎉 almost 😉
Awesome! I still love mine. HNY!
Nice review Dean it does look value for money and I prefer the pull out rail system and it`s pronounced Hunday just like Sunday ;-)
Trying to make my mouth pronounce it properly is another thing though lol
@@WoodworkJourney Same here Dean,it took me two years to saw Huawei properly who would think it`s WAHWEE
Nice bit of kit there Dean, I thinking first Mmmm...... M8 , M6 Hyundai....? I thought Dean's driving a car Down the M8 to get to the M6🤣🤣🤣 It looks a decent saw with a 2 Kw motor It seems to be better with your home made shroud on the back for dust collection that is a good idea That is a good tool review sounds like you like it Great video and take care mate🪚🔧🔨🪛🗜👍👍👍
Thanks Shaun!
So glad I seen this video saved me from buying one. No electric brake and no soft start it's a no no for me.
Fair enough, not things I have issue with in a mitre saw but we all like different stuff 👍
Cool vid Dean. Once you have finalised the extended boot design I can 3d print it for you if you would like. I have some black TPU filament which is quite flexible, it's a bit like stiff rubber. I have printed a couple of dust extraction hose adapters with it and they work just fine. :)
That sounds like a great idea! I’ve not used TPU filament so that would be super interesting. I’ll have to see if I can figure out how to use sketchup or something to get the design and measurements on the computer - don’t hold your breath though lol
@@WoodworkJourney If memory serves you have an ender 3? If so TPU is more difficult to print on it (but not impossible) as it is a bowden style setup which means a long filament path between the extruder to the hotend. My printer started life as an Anet A8 style printer which is direct drive meaning it has a very short filament path so that a flexible filament won't deflect and bend between the extruder and the hotend as they are both in a single unit.
Normally with TPU you have to slow the printer right down to just 20mm/s which makes TPU prints take an eternity. My printer is very heavily modified which means I can print TPU at 200mm/s without print quaity degradation.
I am also in the process of upgrading the hotend which in thoery will allow me to double my print speeds.:)
a great review. was going to get a makita ls1219 but this was too good a bargain. just got mine today and yes, the dust collection sucks. do you have a template for the boot you made or some closeup pics?
Great video love the review
First impressions rather than a review but thank you!
Excellent review
Just my first impressions, but I’m certainly very happy with it!
i have the identical machine but its branded excel more than happy with mine and was cheap from an ebay seller
Great stuff
With regard to the adjustment of cutting angles, if this is like the dewalt setup, then you slacken and move the graduated scale on the bed to suit the detents then adjust everything else to suit. Hope that makes sense?
I’ll have to look but I’m not sure that’s a thing on mine. I will report back if it is
Thanks
Welcome
I have a triton forward slide saw which is amazong for me.
Cool!
Thanks a lot for a great video and some great tips. i wonder if you could (or anybody) confirm that the trench components are on the 1500 watt version as it doesn't say on the web site. thanks again Colin
Great video.
Thanks Frank
I just bought one using your code and got 5% off thank you, regarding the saw, same as yours it needs setting up to be fully square I haven't done that yet as I have encountered what I believe to be a negative point or even a flaw in the design, when the saw is bevelled to 45 degrees you cant get a timber under the bars any bigger than about 40mm which is probably why in the specs they leave that measurement out, possibly going to return it, as a side note they have put a trenching bolt in
Just to add my laser is totally useless it points down the back of the workpiece, did yours work?
Hi I'm a new subscriber in Ireland and I loved your initial review as I have been thinking about buying this mitre saw but the lack of a trenching option was putting me off but I was wondering did you have to drill down from the top to put the bolt in or was the hole already there going all the way through? Do you think it would be possible to cut the dust port so as to shorten it? I've also being looking at the Lumberjack 12" mitre saw as it also has the sliding bars to the front.
Thanks Patrick. I didn’t have to drill down, it was threaded all the way through.
As for cutting down the dust port, possibly but a 90 degree elbow will only take up maybe an inch at the rear
Thanks for the reply, that's made my mind up I'll be going ahead with buying that mitre saw. Thanks again.
If there was a dust extraction hose it would be a lot less dust flying around
As I mentioned, it’s normally attached to my extraction system. The issue though is that the standard boot gets very little of the dust created. I recorded and watched what this saw did many times in slow motion, it’s why I started working on the boot that works well for this Saw
Good review. Can you buy a stand for it?
Thanks, I don’t know if Hyundai do one but there are plenty of aftermarket ones available. I finding making your own works better for most spaces though
Never new Hyundai maps power tools. I know they make industrial machinery.
Are they branching out to power tools.
They make a few tools but that’s all I know
How easy is it to change the blade possibly a short video
👍
Why is it 31.6 degrees? Why that and what's that used for?
I’ve never needed it but Google says this….
“31.6 degrees, which is the standard miter angle for certain compound rafter cuts in many common stick home roof construction situations. Because it is so common, most compound miter saws feature several quick settings like this, to save time and ensure repeatability over dozens or hundreds of cuts.”
@@WoodworkJourney you're better at using Google than me. I couldn't find anything (using Google Bard though). The old man said 'something to do with roofing' ha. Cheers!
Hi, can i ask what the height is off the bench of the plate where the wood rests? Thanks
I’ll try to measure when I remember