Vintage hunting knife Restoration. Full Restoration
Vložit
- čas přidán 22. 08. 2024
- In this video, I am restoring an old hunting knife.
A little background to this project. After the hunting knife project, a good friend of mine contacted me.
Previously, the story was interesting: “After watching my video about the restoration of a hunting knife, he called me and said that he had the same hunting knife. But his condition is slightly better than in the video. He advised me to restore the hunting knife, wanting to preserve as much of the original knife parts as possible. A few days later, the knife was on the table in my workshop.
The video shows the entire restoration process, starting with dismantling the remnants of the knife handle, cleaning from rust by electrolysis, leveling the surface with sandpaper of different grain sizes, polishing the tool to a shine, restoring the missing parts of the knife. Restoration of the bone neck of the knife. Also, for the first time in my projects, cleaning of parts with oxalic acid is used. And much more.
Special thanks to Alexander Weingart for providing the Intro. www.weingart.d...
My camera:
SONY DSC-HX300
Thanks for watching! :)
Check out my other recovery videos!
Here's my playlist:
• German WWI rare ersatz...
#AnDIY_Handmade_Restoration
#Vintage
#hunter
#knife
#lathe
#Restoration
#alexander#weingart
My father had the same type of knife, a pair, in fact. One was a big bowie and the other a smaller one for lighter tasks, just as the one you worked on.
The inscription on my Father’s blades said “solingen steel” and both were meant to be carried together on a double leather sheath.
An important detail to keep in mind is that these knives were takedown knives. No glue or solder was intended to be used to fit the handle. That’s why the end of the tang is threaded, it is not pinned and the pommel has a screw bolt.
To release a rusted pommel of this kind without damaging the horn of the handle with the heat of the torch, a rust penetrant solution and patience (maybe a lot of it) should have been enough. Another thing to keep in mind is that torches are not suposed to be used on heat treated blades unless you are using it as part of the heat treating process, you are willing to repeat it, or loosing some of hardness doesn’t bother you. Torch for the pommel and for the guard is two times too many.
Being honest, I like the content of your channel very much and you are impressively skilled, but didn’t enjoy this video in particular.
Others are great 👍🏼
All the best.
Excellent job. Nice to see someone not go directly to a side grinder, and to leave the pitting. We're all pitted in some way or another.
Really like how that came out...........still vintage but restored. Well done!
The only reason I watched this video was to watch your process with the stacked leather, and you left half of that out. The obnoxious amount of "like and subscribe" reminders will ensure that I will absolutely not do that.
Great work
Yeah we get it already....you want your bell rung
Yes indeed great work👍👍
Hi, do you ever use a ultrasonic for cleaning? Cheers Andy.
That’s a superb restoration, very good craftsmanship 👍👏🙏
Thank you!!!
Great work, Bro
Great Video! And i love that Electro process, pls more of that!
хорошая работа 👍
Спасибо за вашу оценку
Новый клинок, гуд. Лайк 👍 👍👍👍👍
Спасибо бро👍👍👍
C'est Magnifique 👍🌷👏👏👏👏👏👏👏
Great job!!
Great work 👍 👍
Thank you very much!!!!
super!
Thank you very much!!!!
Great work bro 👍👍👍
Very nice video! If I may do a suggestion, would be to try and keep video relaxing. The music in the beginning and the subscribe sounds are very against the nature of the video.
Thank you so much for your criticism. In the following videos, I will take into account your offer. Thanks again.
Lindo trabalho parabéns 👏🇧🇷👏
Nice video. I could hear what sounded like heavy breathing at times though.
I have this same knife!
При съемке данного видео ни один палец не пострадал.
No finger was hurt when shooting this video.
Та да так сэкономил на маникюре))))
Ай да красава
Спасибо большое👍👍👍
Хорошо 👌 поработал
Следующий экспонат??
🤝🤝👍👍
Маленький заказ, 😉😉😉
Следующий тоже будет тоже нож, но очень интересный.
@@AnDIY_Handmade_Restoration будем ждать 👍👍
Время появится обязательно запущу.
Mr AnDIY Handmade Restoration ; I have a question for you , what do you call that type of Nut that tightens down the Pommel
and do you know where I can purchase one ?
Nice job, may I ask what happened to your left thumb?
👏👏👏👏👏
I have exactly the same type of knife and the bone handle is loose and so is the aluminium pommel. Apparently it is German made by Jul Herbertz Solinger. I would like to restore it following your method. What liquid did you use to "refrigerate" your knife and would ice water work instead? Also, what was that grey paste you used to fix the knife stop (video:12min 03)? I've never seen that kind of screwdriver before to release the brass nut on the tang. I've since learned that it's called a snake-eye or a spanner screwdriver.
I will answer some of your questions. As for the paste, it is for brazing copper pipes. I made the screwdriver myself. Metal cleaning is carried out using electrolysis.
This was so relaxing!
I have a knife like that it's a sullinger and it has a tiger on it
Класс!
Спасибо тёзка 👍👍👍
OH PLEASE!!!! NOT THE STEIN. WHERE WILL I HAVE MY BEER?
I found a knife from that company what would it cost to get it restored?
Is free
Andre, при случае подкину ещё щавельки, а то лежит без дела)))
Пасибо, буду рад подгону 👍👍👍👍
Просто золотые руки!
Me: No way he can restore this
AnDIY Handmade Restoration: Hold my 🔧
👍🏿
Thank you very much!!!!
trop lent la video
Хотел фотку прикрутить, не умею ((( к коменту, у меня левая рука с такими же пальцами, удивительно!
К сожалению у ютуба непридусмотрина такая функция.
@@AnDIY_Handmade_Restoration я понял ну не важно
На ветер выброшеное время .
Great vid. I enjoyed watching it. I'm curious tho, are the howls real or added? lol
Thank you, yes, I put the sound of the night forest on the video separately.
Я технику безопасности помню как свои два пальца !
Да, сочувствую вам)))
Я с вами полностью согласен,👍👍👍
Ребята , это шутка такая заводская )"Я технику безопасности помню как свои три пальца ". Я думал вы знаете )))....
@@user-en2fo7vh1m помню, ведро искры принисти или в кампресорной набрать воздуха)))
Aluminum parts on an antique knife? Heh ... How old is this knife really?
from about 50 to 60 years old, maybe a little older.
What got your thumb? Bandsaw got mine....
The work was great, the knife didn't help much.
What is tis 12:8
I fix the part with solder.
vraiment trot trop lent
I could be wrong, but, the knife looks like he took a modern knife and aged it intentionally so he would have something to 'restore'.
He wouldn't be the first CZcamsr to try it.
An interesting assumption, only this knife was found in the forest. I can give a link to the channel of the owner of the knife.
And by the way, I don’t waste time how some famous bloggers first age, and then spoil the story with kilograms of putty and welding.
j arrete avant la fin
Jowika ?
I will not say for sure, since the manufacturer's stamp was absent.
yes I think it's Jowika, I have one restored by me and it's very similar
А РК, она же вся в раковинах?
Как луна
Вот непойму. Зачем тровить от ржи? Если потом шкурить и полеровать?
Скучно ему вот и делает)),а как вы делаете???
@@romandirksen1700 какой смысл травить если потом шкурить?
Интересное предположение, а зачем тогда пескаструить, потом шкурить и полировать?
@@AnDIY_Handmade_Restoration вот именно, шкурь и полеруй. Зачем кислотить,для кадра? Типо всё чётенко у меня!?
Ответ можно получить на заданый вопрос?
Игра не стоило свеч.
Цена вопроса 150 евро