I Broke My Surfboard fins So I Remade Them
Vložit
- čas přidán 3. 04. 2023
- In this video, I remake a set of keel fins that I broke. Except for these fins, I built them using maple branches from a tree that fell down and black epoxy resin. To build the fins I poured the black epoxy resin around the branches to make a large block. I was then able to cut out my fin panels from the block. After I had my panels, I went about making the fins as I usually do.
Join the discord to share and talk about home made fins and surfboards
Discord: / discord
Etsy Shop: www.etsy.com/ca/shop/WaveWasters
Get $10 Entropy Resin: entropyresins.refr.cc/wavewasters
Tools and supplies I use:
Dewalt 5" Rotary Sander (DWE6401DS): amzn.to/49cPInZ
Porter Cable Sander/polisher: amzn.to/2UG7H4J
3M Dual Cartridge Respirator: amzn.to/3Ec9aB0
Reusable stir sticks: amzn.to/3kILNIG
6oz Fiberglas
Ice epoxy(casting resin)
Entropy Epoxy(for glassing)
Amazon Affiliate links - I earn a small percentage from qualifying purchases this comes at no cost to you. - Jak na to + styl
I’ve just finished making my first pair of keels after watching your vids, nothing fancy yet just ply and clear resin finish, but dude I’m stoked on them! Thanks for the inspiration and guides, can’t wait to try them out here in the UK! 🤙
That's sick! I'm glad you found the content helpful.You will have to let me know how they surf.
Always happy to see the bell icon light up to tell me you released a new video. Amazing fins!!
Thanks for the support and I hope it was worth the wait! Between freelance projects and over shooting this project it took way longer to finish than I had hoped.
Great video, keep them coming! 🤙🏼🤙🏼🤙🏼
I’m making some keels too
Can you give some more details on how you kept the cant when you cast the base?
Thanks. The can't angle is cut on the inside of the fin, on the tab. I also thinned out the tab so when glassed it would be thinner than the fin tab grove of the mold. The screw is on the outside of the fin(opposite of the cut cant angle. When you screw the in the bolt it pushes the fin tab up against mold and sets the fin angle. When you screw the bolt in its just enough to push the fin against the mold to much and you can deform the mold.
Master of resin!
Thanks! I'm far from a master, but maybe some day 🤞
Peeling the branches reminds me my time as a boyscout withmy pocket knife ^^ Great video ! worth the wait
plenty of neat tricks to take out of this video aswell !
There is a few tricks in there, I had to edit some out too but I'm sure they will show up in other videos.
Trabalho perfeito irmão 👏🏾👏🏾👏🏾🤙🏿😙
Thanks🏄🌊
You should stabilize the limbs before casting.
@@lawrencefranck9417 I'd love to get into stabilizing wood, I just didn't have that type of resin at the time. In the future I'd like to get some to try out
Brilliant as usual! Thx for nice vid mate! Those fins are so beautiful! Btw that fin Cant routing jig is fckn smart idea!!! Love it! :) cheers, Milos / Apatyka
Thanks! Its one of my favourite sets I've made so far even though I had issues with them. The jig works pretty good so far but I'm still trying to find a way to make it better and faster.
The fit tab casting doesn't look much like czcams.com/video/qkVutYonQhM/video.html , can you go into some more detail what the difference is that you did here? Also what is the alan screws for? Also why are you adding cant if they are not glass on's, isn't the cant decided by the Futures box? Thanks.
Same idea these mold are just made from HDPE to make them more ridged and to make them last longer. The Allen screws are used to hold the fin up against a side of the mold so the fin is held at the cant angle that is mill into the fin base.
Futures boxes the cant is in the fin not the box. If installed correctly the boxes should be at 0° in the board. Some shapers may install them on angle to give fins extra can't but typically they are installed at 0°.
FCS the cant is decided by the box not the fin so then your limited to what the shaper puts in the board. Which limits you a bit unless you can find/make FCS fins with cant built into the fin.
shot bro
🌊🏄
Ciao! What’s the last passage?
Do you mean at 20:14. That's the step where I cast the fin tabs. It makes the tabs close to the thickness needed to fit into the fin boxes. After that its just hand sanding the fin tabs to final thickness and cleaning up fins.