Thanks Kerry, I used Krud Kudder degreaser and cleaner, it doesn't leave any residue. I get a good amount cleaned off and lightly hit it with 220 grit sandpaper then two good coats of a quality primer and two coats of a oil enriched enamal paint. Works wonders. I literally only spend 2-3 min prepping each door cleaner and sand paper before painting havnt had any issues yet. If you wouldn't mind subscribing and liking the video I'd appriciate it. Thanks for stopping by.
Mo, yes under the spots where the wrap peeled off. I used a degreaser called Krud Kutter to wipe down the bare before painting. It doesn't leave any residue so it's fine to paint after cleaning them. Hope this helps. Thanks for stopping by, if you wouldn't mind liking and subscribing I would appreciate it.
I painted my cabinets with Valspar cabinet and furniture paint in swiss coffee. I primed them first with valspar primer. www.lowes.com/pd/Valspar-Satin-Swiss-Coffee-Cabinet-Furniture-Paint-Enamel-1-quart/5013032927?cm_mmc=shp-_-c-_-prd-_-pnt-_-bng-_-LIA_PNT_219_Interior-Stain-Spray-Paint-_-5013032927-_-Local-_-0-_-0&gclid=5fb0aa50508b187ae832c9ed5acad199&gclsrc=3p.ds&ds_rl=1286981&msclkid=5fb0aa50508b187ae832c9ed5acad199
Hi, do you have a video after you have taken off the vinyl wrap how to paint the cabinets please, your video is great, thank you.
czcams.com/video/cLwIan6f1io/video.html
Yes, it's in this video as part of a remodel series. Enjoy
Great advice. i followed this and it truly works well. What's the best way to remove the excess glue from the doors now i have the foil off?
Thanks Kerry, I used Krud Kudder degreaser and cleaner, it doesn't leave any residue. I get a good amount cleaned off and lightly hit it with 220 grit sandpaper then two good coats of a quality primer and two coats of a oil enriched enamal paint. Works wonders. I literally only spend 2-3 min prepping each door cleaner and sand paper before painting havnt had any issues yet. If you wouldn't mind subscribing and liking the video I'd appriciate it. Thanks for stopping by.
Good advice for removing but
Tell pasting this with hands.please make a video.
Does this work with "eco-friendly PVC coatings" on MDF?
Do you remove the backside also?
Will this method work for brand new thermofoil that was recently applied to the wood?
Yes it'll come right off
What are you using to remove left over glue?
Id would like to know too please
Degreaser worked for me
Ok now how to replace it
How do you remove the laminate setting from the frame
Did you run into any grease marks? What color did you repaint the cabinets?
Mo, yes under the spots where the wrap peeled off. I used a degreaser called Krud Kutter to wipe down the bare before painting. It doesn't leave any residue so it's fine to paint after cleaning them. Hope this helps. Thanks for stopping by, if you wouldn't mind liking and subscribing I would appreciate it.
I painted my cabinets with Valspar cabinet and furniture paint in swiss coffee. I primed them first with valspar primer. www.lowes.com/pd/Valspar-Satin-Swiss-Coffee-Cabinet-Furniture-Paint-Enamel-1-quart/5013032927?cm_mmc=shp-_-c-_-prd-_-pnt-_-bng-_-LIA_PNT_219_Interior-Stain-Spray-Paint-_-5013032927-_-Local-_-0-_-0&gclid=5fb0aa50508b187ae832c9ed5acad199&gclsrc=3p.ds&ds_rl=1286981&msclkid=5fb0aa50508b187ae832c9ed5acad199
I don't think I would use my kitchen worktop for this.
Oh man. You lost me at your misogynistic ‘wife’s hair dryer’ comment 🥴
🙄🙄🙄
He is just saying don't use the hair dryer women mostly have more hair and use the dryer it's fine to say that stop it now