Hello Great subscribers! This video is for all the Fathers out there on this special day. This is for those fathers who have or are showing their children all the tricks of the trade on being a little bit more mechanically inclined...Remember dads your kids watch everything you do good and bad. Quote of the Day: ****You have not failed until you quit trying.****
I can appreciate this. Thanks I actually live about a mile from where the guy who invented the grease Zerk. His house was the Zerk mansion and his gate at his house was spelled Dun Movin’. Pleasant Prairie WI. Is where the house is. Kenosha Co. WI
Used to work with an old mechanic that called grease zerks "Alemite fittings". Never heard anybody else call them that. Thanks for the great advice Mike!
Thanks so much! I was about to buy new zerks and considered that they may snap or strip. It took longer to drag out my torch than to fix it on my 40+ year old lawnmower. A big thank you!
Glad to hear Poppy! Thank you so much for watching and sharing your results, we really appreciate it, have a great week my friend. mad Mike the hammer SPC
Perfect timing then Leonard! Thanks as always for being here with us, we truly appreciate our great subscribers like you :) Have a super day my friend. mad Mike the hammer SPC
Right on Alex! Thank you for the view and comment, glad you liked our quote, it's true :) Hope you have a fantastic week my friend, always great to hear from you. mad Mike the hammer SPC
I have one that’s giving me a heck of a time. I tried a heating torch right off the bat but it didn’t do the trick. I don’t really want to take it all apart. Now I’m searching through CZcams. Nice little grease gun you have. I suppose I’ll keep using the best trick I’ve found for problems,, persistence.
Sometimes that's all it takes, Travis, is "persistence". Thank you for watching and sharing, hope you have a great week and all the best on your project my friend. mad Mike the hammer SPC
I was talking to my brother in law (late 20s early 30s) he was working under his truck doing what ever. I asked him if he was greasing the zerks. He slid out real quick and looked at me mean and said "aint no jerks under here"! Oh my lord, the mind is a terrible thing. That was an obvious fix that I never thought of. Hell I don't know if any of my NEW vehicles even have them.
You bet! Thank you for watching and sharing Ben, we truly appreciate all of our great subscribers like you, hope your week is the best my friend. mad Mike the hammer SPC
Never thought about putting heat on a zerk. I have seen tools that you hammer to hydraulicly force hardened grease though but I think your way is better.
We call them grease nipples here in australia. Dunno if they are the same as your zerks but grease nipples have a spring & a ball in them & if you heat a spring it weakens them & the ball wont be pushed back against its seat therefor letting contamination in. I think i will just stick with changing the zerk/ grease nipple.
I honest to God don't know how you guys do this. Not only does My dad have a dump truck company and I grease The trucks and this happens often, I also literally just spent $50 on a new chainsaw bar and chain, because for the last 5 years mine hasn't been cutting right and no amount of sharpening has fixed it to the point where I decided the bar was bad and someone at Lowe's pointed out that I need to make sure it's getting oil and grease and I did not know that that was a thing. I'm buying that grease gun right now
Same to you! We appreciate the view and well wishes my friend, it's always a pleasure to hear from you. Hope you have a fantastic week. mad Mike the hammer SPC
Thank you very much Skippy! We really appreciate the view and great comment, makes all we do worth it. Hope you have a stupendous week my friend. mad Mike the hammer SPC
It's this amzn.to/2OTeLYF and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC
Happy to help Scorch! Thank you so much for watching, we truly appreciate all of our great subscribers like you. Hope you have a great week my friend. mad Mike the hammer SPC
Glad you think so Greg! Thank you so much for watching and for the comment, we really appreciate it my friend. Hope you have a super week. mad Mike the hammer SPC
Glad it was helpful Michael! Thanks so much for watching, we truly appreciate it. Hope your week is the best, God bless my friend. mad Mike the hammer SPC
I have a bluepoint grease gun with a pressure boost switch it pushes threw any pluged fittings😉 I plan on getting a lock and lube kit as per your suggestion for my grease gun in the future as well🤘
Glad it was helpful! Thank you so much for watching and sharing Chris, we really appreciate it, hope you have a fantastic week my friend. mad Mike the hammer SPC
I tried greasing my casters on an industrial cart & on my welder. Oh, my hydraulic press also has those shielded zerks you know the ones that are a bolt on one side & has a nut with a zerk in the middle with a ring around it. My greasegun wont fit into it. Is there a different size tip for them?
If the needle on this amzn.to/2TNYhUf & amzn.to/3zE376N doesn't reach, please send a picture to sweetprojectcars@gmail.com and we will see what we can do to help you. Thanks for watching Tim. Have a great day. mad Mike the hammer SPC
We love them, they are the best we've found and use them for everything. Thanks for watching and asking, have a great day my friend. mad Mike the hammer SPC
Well I have been watching your videos for a long time. Long story short. Cleaned boyfriend dad's car. Now he thinks I should do his truck Not! I tried to explain how to do the headlights and well you know . Women don't know what they're talking about.
You can do it! Great job, thanks for watching and sharing your awesome results! You do know what you are doing, our videos are for "Guys & Gals"! Hope you have a stupendous day my friend. mad Mike the hammer SPC
Hello Great subscribers! This video is for all the Fathers out there on this special day. This is for those fathers who have or are showing their children all the tricks of the trade on being a little bit more mechanically inclined...Remember dads your kids watch everything you do good and bad. Quote of the Day: ****You have not failed until you quit trying.****
I can appreciate this. Thanks
I actually live about a mile from where the guy who invented the grease Zerk. His house was the Zerk mansion and his gate at his house was spelled Dun Movin’. Pleasant Prairie WI. Is where the house is. Kenosha Co. WI
Interesting. Thank you for watching and sharing my friend, we really appreciate it. Hope you have a fantastic week. mad Mike the hammer SPC
Used to work with an old mechanic that called grease zerks "Alemite fittings". Never heard anybody else call them that. Thanks for the great advice Mike!
P.S.: You didn't thank Hoolio..
Our pleasure! Thank you for watching and sharing, we really appreciate it mwpahl38! Hope you have a fantastic week my friend. mad Mike the hammer SPC
Alemite is a brand name for grease fittings and related items. It’s the same as everyone calling tissues Kleenex.
Mike, I had no clue how to repair. Thank you for the secret again.
Our pleasure my friend! Thank you for watching and sharing, always great to hear from you Kyle, hope your week is fantastic. mad Mike the hammer SPC
Thanks so much! I was about to buy new zerks and considered that they may snap or strip. It took longer to drag out my torch than to fix it on my 40+ year old lawnmower. A big thank you!
Glad to hear Poppy! Thank you so much for watching and sharing your results, we really appreciate it, have a great week my friend. mad Mike the hammer SPC
This worked great on my backhoe . I had one zerk that water pools up in and I haven’t been able to use it for a bit. This worked like a charm
I've got a couple of 4-wheelers with a few jerk zerks....I needed this video....Thanks Mad Hammering Mike!
Perfect timing then Leonard! Thanks as always for being here with us, we truly appreciate our great subscribers like you :) Have a super day my friend. mad Mike the hammer SPC
That's a great quote for the day, Mike, and I got another neat little trick to add to the old memory banks 👍
Right on Alex! Thank you for the view and comment, glad you liked our quote, it's true :) Hope you have a fantastic week my friend, always great to hear from you. mad Mike the hammer SPC
I have one that’s giving me a heck of a time. I tried a heating torch right off the bat but it didn’t do the trick. I don’t really want to take it all apart. Now I’m searching through CZcams. Nice little grease gun you have. I suppose I’ll keep using the best trick I’ve found for problems,, persistence.
Sometimes that's all it takes, Travis, is "persistence". Thank you for watching and sharing, hope you have a great week and all the best on your project my friend. mad Mike the hammer SPC
I appreciate the input. Following your lead I did essential the same thing with a heat gun.
Nice, jonny mo! Thank you for watching and sharing, we really appreciate it, have a fantastic day my friend. mad Mike the hammer SPC
I was talking to my brother in law (late 20s early 30s) he was working under his truck doing what ever. I asked him if he was greasing the zerks. He slid out real quick and looked at me mean and said "aint no jerks under here"! Oh my lord, the mind is a terrible thing. That was an obvious fix that I never thought of. Hell I don't know if any of my NEW vehicles even have them.
LOL, thanks for watching and sharing Sam! Hope you have a great weekend my friend. mad Mike the hammer SPC
Happy Fathers Day Mike..................................................
Why so many periods?
And bam just like that ya save a guy a ton of time and headaches! Sweeeeeet! And thank you very much! Happy father's day!
You bet! Thank you for watching and sharing Ben, we truly appreciate all of our great subscribers like you, hope your week is the best my friend. mad Mike the hammer SPC
Never thought about putting heat on a zerk. I have seen tools that you hammer to hydraulicly force hardened grease though but I think your way is better.
We think so too! Thank you for watching and sharing Adna, we really appreciate it. Hope you have a great day. mad Mike the hammer SPC
We call them grease nipples here in australia. Dunno if they are the same as your zerks but grease nipples have a spring & a ball in them & if you heat a spring it weakens them & the ball wont be pushed back against its seat therefor letting contamination in. I think i will just stick with changing the zerk/ grease nipple.
Thanks for watching and sharing, we really appreciate it. Hope you have a fantastic day my friend. mad Mike the hammer SPC
Another great tip Mad Mike.
You are one of a kind.
Thank You.
I appreciate that SPT! Thank you so much for watching, we truly appreciate it my friend. Have a stupendous week. mad Mike the hammer SPC
Very nice trick guys. Thanks for sharing and have a great week. Dutch regards, Nico.
Our pleasure Nico! Thanks as always for being here with us, we really appreciate it. Hope you have a fantastic week my friend. mad Mike the hammer SPC
Always best hacks from you... Sweet Projects. 👍👍👍👍👍
It's our pleasure to share Tonny! Thank you so much for watching, we really appreciate it. Have a great week my friend. mad Mike the hammer SPC
I honest to God don't know how you guys do this. Not only does My dad have a dump truck company and I grease The trucks and this happens often, I also literally just spent $50 on a new chainsaw bar and chain, because for the last 5 years mine hasn't been cutting right and no amount of sharpening has fixed it to the point where I decided the bar was bad and someone at Lowe's pointed out that I need to make sure it's getting oil and grease and I did not know that that was a thing. I'm buying that grease gun right now
Awesome! Thank you so much for watching and sharing EC, we truly appreciate it. Hope you have a great week my friend. mad Mike the hammer SPC
Sweet project cars hey Mad Mike happy pops day!!👍👍🇺🇸🇺🇸🇺🇸🙏🍺🍺
Same to you! We appreciate the view and well wishes my friend, it's always a pleasure to hear from you. Hope you have a fantastic week. mad Mike the hammer SPC
Great Tip! Thanks Mad Mike! you always rock 👍
Thank you very much Skippy! We really appreciate the view and great comment, makes all we do worth it. Hope you have a stupendous week my friend. mad Mike the hammer SPC
What's a blaster
It's this amzn.to/2OTeLYF and just a reminder, all of the products/tools we use in our videos can always be found in the ...MORE of the videos description, see here 3c5.com/4u6dj if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC
Hi where'd u get the little grease gun and the long tip to fit in the zerk??
Great tip right there! Thanks Hammer!! :)
Happy to help Scorch! Thank you so much for watching, we truly appreciate all of our great subscribers like you. Hope you have a great week my friend. mad Mike the hammer SPC
so why didn't you add fresh grease after or was it still cloged?
Very Good!... #81 ✝ {10-10-2023}
Thank you Carl! We appreciate the view and comment, hope you have a fantastic week my friend. mad Mike
That was a nifty tip 👍👍
Glad you think so Greg! Thank you so much for watching and for the comment, we really appreciate it my friend. Hope you have a super week. mad Mike the hammer SPC
Great tip , thanks for sharing , God bless !
Glad it was helpful Michael! Thanks so much for watching, we truly appreciate it. Hope your week is the best, God bless my friend. mad Mike the hammer SPC
I have a bluepoint grease gun with a pressure boost switch it pushes threw any pluged fittings😉
I plan on getting a lock and lube kit as per your suggestion for my grease gun in the future as well🤘
Awesome! Thank you for watching and sharing Willy, we appreciate it my friend, hope you have a fantastic week. mad Mike the hammer SPC
Great tip 🤙
Glad it was helpful! Thank you so much for watching and sharing Chris, we really appreciate it, hope you have a fantastic week my friend. mad Mike the hammer SPC
I tried greasing my casters on an industrial cart & on my welder. Oh, my hydraulic press also has those shielded zerks you know the ones that are a bolt on one side & has a nut with a zerk in the middle with a ring around it. My greasegun wont fit into it. Is there a different size tip for them?
If the needle on this amzn.to/2TNYhUf
& amzn.to/3zE376N doesn't reach, please send a picture to sweetprojectcars@gmail.com and we will see what we can do to help you. Thanks for watching Tim. Have a great day. mad Mike the hammer SPC
Sweet Project Cars I have a needle greaser from snap-on. Didn't think it was for them, they are regular zerks just shielded. 🤔
Thank you!!
Absolutely, it's our pleasure to help. Thanks for watching. Have a great day. mad Mike the hammer SPC
We call them grease nipples not zerk here in Australia
Thanks for watching and sharing Graham, we really appreciate it. Hope you have a fantastic day my friend. mad Mike the hammer SPC
Good
Happy to help! Thank you for watching, have a fantastic week my friend. mad Mike
Mike, how do you like those Harris spray bottles?
We love them, they are the best we've found and use them for everything. Thanks for watching and asking, have a great day my friend. mad Mike the hammer SPC
Are there no rubber O rings in a zirc fitting?
We've never seen them. They seal by using NPT threads which is pipe thread. Thanks for watching Ender. Have a great day. mad Mike the hammer SPC
@@SweetProjectCars Oh, I was thinking where the spring load ball seals at the nipple end. Thanks Mike.
Helloo!
Hello! Thanks for watching, we appreciate it. Hope you have a great day. mad Mike the hammer SPC
👍
Thanks for watching and for the thumbs up Vintage, we really appreciate it. Hope you have a fantastic day my friend. mad Mike the hammer SPC
😎👍
These are called grease nipples in the UK
Interesting! Thank you for watching and sharing Mongol, we really appreciate it. Hope you have a great week. mad Mike the hammer SPC
Sweet Project Cars Thank you your team too in Sunny Florida all the best
Well I have been watching your videos for a long time. Long story short. Cleaned boyfriend dad's car. Now he thinks I should do his truck Not! I tried to explain how to do the headlights and well you know . Women don't know what they're talking about.
You can do it! Great job, thanks for watching and sharing your awesome results! You do know what you are doing, our videos are for "Guys & Gals"! Hope you have a stupendous day my friend. mad Mike the hammer SPC
👍
Thanks Kerry! Appreciate the view and thumbs up my friend. Hope you have a great week. mad Mike the hammer SPC