2 years later & this tutorial is STILL useful & relevant. Thank you, Joe! I didn't even need a new fan, it just needed to be put back in the proper position!
@@Joeteck Hi! I have a slightly different, bigger model (Vicks V5100NS) with the exact same issue, but I opened it and the fan seems to be working fine. Also, it's a very different, bigger fan. It's a white one, the blades are exposed (I can touch them) and it's installed vertically. Do you have any idea what needs repair? I've already cleaned everything with vinegar and water multiple times and removed the demineralizing cartridge. Thanks!
Thank you so much!I bought this one a year ago because my other one went out. But I didn't realize it was the fan. Thanks to your video, I replaced it today!. And since there was a pack of four I went ahead and replace the fan in the other one(different brand) and now I have two really good working humidifiers. My dad was so proud of me, lol. Mind you I'm a 44 year-old woman..lol.
Thanks for doing this! Appreciate your help! FYI the Amazon link takes you to a 0.15A fan that we purchased and found noisy. The original fan was 0.09A.
*We liked it **Fastly.Cool** so much in the basement, we bought a second one for the main level. The amount of moisture it pulls out of the air is astonishing.*
I knew pretty early on that my humidifier needed to be fixed. After 2 years of waiting for it to officially stop working, I was finally able to use this video. My humidifier is back in working order. Thank you so much.
Had mine for years and it just started doing this. I’m 8 month pregnant and need it at night. The fact that I found this video for the exact problem of the exact humidifier was amazing! You saved my husband from having to hear a lot of complaining lol
Wow thanks so much! I contacted their customer service and they couldn’t tell me what’s wrong with it. I’m so glad I found this video and fixed it myself!
Helped me n my 7 wk old at 3 am. I trusted my guts and went ahead to find the fan dirty. Just needed to clean it and it was good as new. Woll still buy a couple new ones to replace if it diea on me. Thanks so so much. Keep sharing knowledge and making the world a better place. 😊
Great video, Just to let you know before throwing that fan away you might want to try and soak it in some vinegar for a half hour, then blow it out and let it sit for a few hours to dry. I figured what do I have to lose, and it worked fine. I also gave it very little wd40. Like I said great video Joe, very informative, thank you.
Thanks much for the info. My fan fins were clogged with dust which was weighing the rotor fins down. Cleaned the fan fins with a piece of small wire and trimmed a q-tip down to size to finish cleaning the fins on the fan. Tested fan b4 put back together. It's working thanks again for the video!
Joe you are the best. My husband was going to make me throw away this humidifier and I knew there had to be a solution but had no idea how to find out what the probem was. Thank you so much for putting this video up. I've ordered the fans and will be humidified by Friday!
Thank you so much for making this video and showing the steps to fix this. I was able to take the fan out clean it with the brush and it started working. Also I ordered the parts from amazon in case this happens again or the fan gets too noisy as we have seen in the past. Wish we had known this trick earlier as we threw away our earlier humidifier due to this problem. Thanks again!!!
Thanks for the great video. I removed the fan and when tried to rotate manually a small elastic band came out. Probably my 2 yr old has squeezed it in...After removing it the humidifier is working good...
Great video. I can get four of those quiet ones for ten bucks? And I was going to take the stupid humidifier out to the garage and treat it with a sledge hammer. Before I saw this, I was looking at other units and trying to find reviews and ratings, with no consensus. And I started seeing cheapo units in "most quiet" ratings, and I started not believing it. So i'm going to give it a shot. This reminds me of all the noisy OEM fans I had in my self-built PCs before I found an Austrian fan and cooler manufacturer, Noctua. The fans are $20 each, but have both lubricated and magnetic bearings and are warranted for 7 years. This little WINSINN unit looks like I might never even need to replace the "builder's grade" cheapo put in the unit to begin with. What an incredibly useful video. Thanks, Joe!!!
First of thank you for this video, it really helped with disassembling the humidifier. My fan works and is blowing but the steam just still isn’t coming out. I took it out and adjusted it, but there is no difference. I got this a month ago and don’t want to replace it so soon. This all started after I cleaned it yesterday with white vinegar as recommended then I noticed that the steam wasn’t coming out but the water was still bubbling at the bottom and the fan was on. So I left it overnight thinking it would take time to reset I guess and this morning the water in the base just stopped even bubbling at all, but the fan is still working. Can anyone suggest anything else?
Thank you! Still helping in 2024❤ as others have stated, I just needed to unplug it, clean it and plug it back in! It may break again in the future, but I will replace the fan at that point
Genious!! Thank you so much!!! It was hard to find a video but this model and during allergy season and this covid19 pandemic my fan blew out. My order took a month but it was worth the wait!! Thanks so much for saving my $$
Thank you sir! Your instructions were easy to follow and I was able to fix my humidifier. The only issue is that my new humidifier fan has a loud buzzing noise, but I'll learn to live with that. Thanks
Thank you so much for this tutorial, i have a question, mine the fan works perfectlybut the heater dont create mist i see it pushes water but no mist any recommendation?
Thanks for the video. I did as you instructed, but the humidifier still won’t work correctly. It creates the steam, but the steam appears to just bubble as displayed. Very strange
My fan is blowing quietly when it's not put in place but when I set it in the humidifier, there is a loud noise that starts up and no mist comes out the top.
@@Joeteck Looks like the one you are linked to has a USB connector. Any thoughts on how to make this work or will I need the fan with the correct connector??
Hi Joe, I had an exactly same issue so I thought it was a fan so I replaced the fan, however still having the same issue. Unsure what else to check. Thank you.
Hi Joe thanks for the video. In my case I have some problem with ultrasonic mist maker parts( the part that is kept in the triangle cover). Can you please help me with the part description plz?
Just some info for laypeople (like myself) that is not mentioned in this video: this humidifier (at least the one I have in this model) is held together by Torx security AKA “tamper-proof” screws, and you will need a Torx security screwdriver in the correct size to remove them. I ordered some from Amazon and they were too small, so I ordered some larger ones that seemed to fit, however I still have not been able to move the screws at all in order to open the unit and check the fan. If anyone has any other advice I’m here for it, otherwise at this point I’ll probably just get a new humidifier.
Hello Joe and thanks for the helpful video. The blower in the unit is a 24v 0.09A, and I tried replacing it with a 24v 0.10A and it doesn’t turn on. Any thoughts?
Great instructions! I have the model V5100. Appears the fan motor is bad. I cannot find a replacement. Do you know where to find s motor? 120V shaded pole . Thanks
Mine just makes a loud noise, I notice the bubbling too.. but it still blows steam like is always does. Would you replace the fan or could it be something else?
By chance you have a link to that torx bit you used to remove the exterior screws, just want to make sure I get one that’s long enough. Not sure if I want to buy an entire set if I don’t need to
I just purchased this same Vick's humidifier and mine makes a loud bubbling/gurgling sound when it is turned on. I have seen multiple other videos of these humidifiers working silently, including yours! Do you know how to solve this issue to make it not make a bubbling sound when on?
Do you have wiring schematic for the Vicks V4450? The 3 speed power switch fell apart (UV damaged plastic) during disassembly to diagnose why it stopped working. I bought a new switch, but need clear schematic so I can wire it correctly. Thank you.
Hi, Do you know if the same set of new fan work with pure humidifier? I fixed my vicks humidifier. And have an extra new fan which i’m trying use in PURE humidifier
Hi Joe, my cool mist stopped working suddenly. I turn it on, but there's no green light but when I turn it off, it flashes the green light once. Could the fan be faulty?
Nice video, Joe. Is there a fuse somewhere inside the case? I had it on trying to get the transducer going and touched the water level sensor (not the model in your demo. mine is V5100NS) and all power stopped.
@@Joeteck I understand. I know it’s frustrating. But unfortunately by following you link and buying the fan it is way too loud. It’s the type of fan for 3D printing like you mentioned. Video was very helpful and followed it perfectly, problem is the fan I bought from the link.
Hello, I have the same humidifier well it's the 575. I own two of them and the turn dial to turn them on has seized up so I cannot turn it on or off. Do you have any information on this? I haven't tried prying it to turn it because I don't want to break it.
I just ordered the fan from the Amazon link above. I reviewed the specs again and the linked fan is a 12V/.15A fan. I have a feeling that this is NOT the correct fan to order now. Any inputs?
I just successfully replaced the fan, but I discovered a new problem: The shutoff isn't working properly. The ultrasonic element does go lower, but doesn't stop completely, the fan still goes full power, and the LED on the knob stays green instead of turning red. It seems to work by the magnet pulling apart two small bars in a switch-in-a-tube element; maybe over a long time they've somehow gotten too stiff to be pulled far enough apart or something? It doesn't look like a part that'd be cheap to replace...
some one please, mine is not so much a hardware problem. But I used...I think the wrong oils, first eucalyptus oil then the essential oils. now its like the there is a build up that seems like its burnt on the inside and so I thought this will just be how the inside of my humidifier looks...so I just continue to drop the essential oils and turn it on but its like it doesn't blow nice and strong and also It doesn't smell so good. I want to say I have tried everything to get it cleaned but nothing.
@@Joeteck But I've been using oils, and even some coals especially during covid. then I would just clean it then its business as usual. I suppose I should not have changed the type of oil. so devastating.
I have a HuPro Electric static humidifier. Plugged into AC machine will not work outlet works units full of water indicator lights will not turn on using the remote or the display on the machine. have the machine broken down to the circuit boards. Wondering if you can help me find the problem with a multi meter. Thanks.
@@Joeteck yes have put the fan back to the position, it spins fine and air also comes but the ultradisc like element is still giving bubbles and no stream
Well, replaced the fan today, but it seems like the fan blows too hard and no cool mist comes out. Also noticed that the fan blows at the same speed regardless of the knob position. :(
You bought the wrong fan type. Too high of amp rating. I mentioned it in the video. The fan speed should always be the same speed. Just the amount of mist that is released. You shouldn't hear the fan loudly. slight fan noise you should hear.
What's the current/power rating supposed to be on these? I threw the original one away and the replacement is much louder and very little mist comes out. Probably to high of a current rating. But it's not even on the label so don't know what it is.
These types of humidifiers seem to have a problem with leaking. Could you also do a video covering how to fix that issue? I can't find any help online and am afraid to run mine anymore for fear of electrocuting someone and/or causing a lot of water damage to my floor.
After opening the unit and identifying that the blower fan wasn’t working, I replaced it with a new 24v .1a 5015mm fan. However, I’m still not getting any power to the new one. Any ideas why?
Like bad power supply to only the blower fan? Is there a way to isolate what the problem piece is and replace it? I’m getting power to create the mist and I have the green indicator light when the switch is on.
@@aaronblaser8655 do you have the identical humidifier as myself? If so I would need to take mine apart again and reverse engineer the board. Not that difficult, I would need to isolate the 24v circuit.
Hi @@Joeteck Just wanted to check and see if you've had a chance to open yours up to look at the board? Would love to fix the one I have versus throwing it out to buy a new one.
The link in the description is incorrect. Just bought those and the fans are very loud and way too strong. Wondering if you accidentally linked to the first set of fans you got...
Hi Zac. I bought them too and I think I know what you mean. In the video, because they weren't held close to a mic, the impression is that they're silent. When I first turned on the unit before putting it back together, the new fan made a fairly annoying buzzing, but I figured the noise would be softened when I put the unit together, which it was. But I'm going to save the original fan and do what a lot of the other commenters here did: Clean the original and put it back in. I noticed my originale was all gunked up with dust. I also remember that it really wasn't that loud when new and that only after a month or so it started getting all ratchety. But I already reassembled the unit. I know how to do it without looking at the video, so I can replace the new fan with the original at some point. I'm going to hit it with some canned air. Cheers.
@@christopheryochum3602 Yeah I popped my old fan off and tried to clean it and lube it and it must just be a dud. Its rattling all over the place. The new one is so loud for me, the noise is not really reduced by the enclosure at all. I've been searching online for a quiet solution but sadly can't find anything.
@@christopheryochum3602 I can also smell a strong odor coming from the fan, like the motor is burning out or something. All in all not a good setup IMO.
@@zac_holland You're right. It's still disappointing how little the enclosure mitigates the buzzing because I got the humidifier for my dad. It sits about three feet away from his bed, the only saving grace being his deafness to a lot of the frequencies you and I hear. I'll let you know if I find anything out from a legit high-end computer-fan manufacturer, but I'm not seeing any of these little things being made by high-end firms like Noctua. The air speed has something to do with the sound, but I think a lot of contributing noise is from the bearing and fan-blade shape. I have seven Noctua $20 fans in my self-built PC and they're quieter than anything I've ever used before, and what I used before were fans running at the same speed, so it's not just air making the noise. The bearings are combined hydrodynamic/magnetic proprietary designs that make no noise whatsoever. In their case, the air is, indeed, all you hear. They're out of Austria, and all they make are computer fans and coolers. I'm going to write them and see if they have anything in the pipeline. Here's a notice from them that they'd come out with a line of 24V fans for industrial use: noctua.at/en/noctua-introduces-24v-industrialppc-fans However, nothing looks like it would fit the application we need. However, I'll write them anyway. Sometimes there are products out there that are not visible on a vendor site for whatever reason. I'm still going to take an air gun to my original fan and may take the humidifier apart again just to see if I put the original back in what happens. The original honestly wasn't that noisy until a couple months in, so it may have been because of all the dust gunking up the works.
@@Joeteck you’re awesome!! Thanks!!! We made do last night by putting a small fan on the outside of the humidifier. Thanks for helping us with the repair.
Oh good grief, friend.... w/ all that unscrewing, getting the right blower.... I’m going to buy a new unit. 🤷🏽♀️ BTW, would u happen to know the unit’s ‘shelf life,’ if I use it 24/7? I, along w/ My 4yo granddaughter, who comes over 5days/wk, suffer w/ DRY. EYES/NOSES, so it WAS ALWAYS. ON. 🤷🏽♀️
2 years later & this tutorial is STILL useful & relevant. Thank you, Joe! I didn't even need a new fan, it just needed to be put back in the proper position!
It's comments like this that make me continue doing what I do!!!
You have the link for the quiet fan?
@@Joeteck Hi! I have a slightly different, bigger model (Vicks V5100NS) with the exact same issue, but I opened it and the fan seems to be working fine. Also, it's a very different, bigger fan. It's a white one, the blades are exposed (I can touch them) and it's installed vertically. Do you have any idea what needs repair? I've already cleaned everything with vinegar and water multiple times and removed the demineralizing cartridge. Thanks!
Thank you so much!I bought this one a year ago because my other one went out. But I didn't realize it was the fan. Thanks to your video, I replaced it today!. And since there was a pack of four I went ahead and replace the fan in the other one(different brand) and now I have two really good working humidifiers. My dad was so proud of me, lol. Mind you I'm a 44 year-old woman..lol.
Thanks for doing this! Appreciate your help! FYI the Amazon link takes you to a 0.15A fan that we purchased and found noisy. The original fan was 0.09A.
*We liked it **Fastly.Cool** so much in the basement, we bought a second one for the main level. The amount of moisture it pulls out of the air is astonishing.*
I knew pretty early on that my humidifier needed to be fixed. After 2 years of waiting for it to officially stop working, I was finally able to use this video. My humidifier is back in working order. Thank you so much.
Had mine for years and it just started doing this. I’m 8 month pregnant and need it at night. The fact that I found this video for the exact problem of the exact humidifier was amazing! You saved my husband from having to hear a lot of complaining lol
Glad you found my video helpful! And congratulations on your pregnancy!!
Wow thanks so much! I contacted their customer service and they couldn’t tell me what’s wrong with it. I’m so glad I found this video and fixed it myself!
I cannot believe how succinctly this was explained. Most people add so many unnecessary sentences to tutorials lol; thank you! 🙏
Helped me n my 7 wk old at 3 am. I trusted my guts and went ahead to find the fan dirty. Just needed to clean it and it was good as new. Woll still buy a couple new ones to replace if it diea on me. Thanks so so much. Keep sharing knowledge and making the world a better place. 😊
Great video, Just to let you know before throwing that fan away you might want to try and soak it in some vinegar for a half hour, then blow it out and let it sit for a few hours to dry. I figured what do I have to lose, and it worked fine. I also gave it very little wd40. Like I said great video Joe, very informative, thank you.
Bushings are worn out, then burns out due to not moving. So that won't work.
That worked for me too !
This totally worked. Thank you and so great that you posted the link to the part.
Thanks much for the info. My fan fins were clogged with dust which was weighing the rotor fins down. Cleaned the fan fins with a piece of small wire and trimmed a q-tip down to size to finish cleaning the fins on the fan. Tested fan b4 put back together. It's working thanks again for the video!
Joe you are the best. My husband was going to make me throw away this humidifier and I knew there had to be a solution but had no idea how to find out what the probem was. Thank you so much for putting this video up. I've ordered the fans and will be humidified by Friday!
Wow, it's comments like this that keep me helping people like you!!! Pinned comment!
Exactly my problem Joe. Thanks for sharing!
That's awesome!!
Joeteck where in the description
My fan was just dirty, but I would have never have checked it if it wasn't for your video. Runs perfect now!!!
THANK YOU! I didn’t even need to buy a new fan, it just needed a little adjustment!
Thats awesome. Maybe it was dropped and the fan stopped spinning?
What else did you do mine is still not workng
Try blowing into it to make sure it's dry. Also unplug the fan and plug it back in. That worked for me.
Thank you so much for making this video and showing the steps to fix this. I was able to take the fan out clean it with the brush and it started working. Also I ordered the parts from amazon in case this happens again or the fan gets too noisy as we have seen in the past. Wish we had known this trick earlier as we threw away our earlier humidifier due to this problem. Thanks again!!!
Glad you got it fixed!!
Thumbs up! Thanks for pointing out about the fun. This answers a lot of questions why mist is not blown higher (in my humidifier's case).
Thanks for the great video. I removed the fan and when tried to rotate manually a small elastic band came out. Probably my 2 yr old has squeezed it in...After removing it the humidifier is working good...
Thank you for the tips! I just ordered the part for $10 on amazon and I’m going to try it and hope it works!!!
Great video. I can get four of those quiet ones for ten bucks? And I was going to take the stupid humidifier out to the garage and treat it with a sledge hammer. Before I saw this, I was looking at other units and trying to find reviews and ratings, with no consensus. And I started seeing cheapo units in "most quiet" ratings, and I started not believing it. So i'm going to give it a shot. This reminds me of all the noisy OEM fans I had in my self-built PCs before I found an Austrian fan and cooler manufacturer, Noctua. The fans are $20 each, but have both lubricated and magnetic bearings and are warranted for 7 years. This little WINSINN unit looks like I might never even need to replace the "builder's grade" cheapo put in the unit to begin with. What an incredibly useful video. Thanks, Joe!!!
Worked perfectly! Thank you!
Thank you so much for this! Made my life so much easier!
First of thank you for this video, it really helped with disassembling the humidifier. My fan works and is blowing but the steam just still isn’t coming out. I took it out and adjusted it, but there is no difference. I got this a month ago and don’t want to replace it so soon. This all started after I cleaned it yesterday with white vinegar as recommended then I noticed that the steam wasn’t coming out but the water was still bubbling at the bottom and the fan was on. So I left it overnight thinking it would take time to reset I guess and this morning the water in the base just stopped even bubbling at all, but the fan is still working. Can anyone suggest anything else?
Check the float switch, if that’s not it check you wire connection s to everything
Thank you! Still helping in 2024❤ as others have stated, I just needed to unplug it, clean it and plug it back in! It may break again in the future, but I will replace the fan at that point
Genious!! Thank you so much!!! It was hard to find a video but this model and during allergy season and this covid19 pandemic my fan blew out. My order took a month but it was worth the wait!! Thanks so much for saving my $$
Thank you sir! Your instructions were easy to follow and I was able to fix my humidifier. The only issue is that my new humidifier fan has a loud buzzing noise, but I'll learn to live with that. Thanks
Its vibrating, need to find that
It's either vibrating or there is something thin like paper hitting the gan
Thank you so much for this tutorial, i have a question, mine the fan works perfectlybut the heater dont create mist i see it pushes water but no mist any recommendation?
Than you great explanation and very very helpful.
Thanks for the video. I did as you instructed, but the humidifier still won’t work correctly. It creates the steam, but the steam appears to just bubble as displayed. Very strange
Thank you, but I cannot find the blower!
Thanks Joe for sharing ur expertise. It is appreciated!
Thank you for your kind words!!
The fan is unavailable, do you know of a good replacement?
Your Amazon Link is broken. I ordered a .1a 5015. My unit appears to have a user adjustable reostat that I'll try if it's too loud.
My fan is blowing quietly when it's not put in place but when I set it in the humidifier, there is a loud noise that starts up and no mist comes out the top.
Hi Joe. The link for the Fan Replacement on Amazon "Is Currently Available", is there another suitable replacement available? Thanks.
V/R
Grateful
thanks brah!
The screws on the vicks humidifier that we have are tamper proof. No screw drivers have worked to loosen and remove them
My fan is working still no vapor's from the center part. What could be wrong?
I just gave away a nice humidifier for this exact reason, it still produced mist, just no fan...wish I had seen this video yesterday!
How did you find it?
Thanks for the this, I just replaced the fan in mine. Just an FYI it looks like Amazon switched the product you linked to in your description.
Thanks! Fixed
@@Joeteck Looks like the one you are linked to has a USB connector. Any thoughts on how to make this work or will I need the fan with the correct connector??
@@josephstegall4831 Exactly -- I purchased the wrong one. Link is to USB connector, as you mentioned. @Joeteck: updated link?
Hi Joe, I had an exactly same issue so I thought it was a fan so I replaced the fan, however still having the same issue. Unsure what else to check. Thank you.
Hi Joe thanks for the video.
In my case I have some problem with ultrasonic mist maker parts( the part that is kept in the triangle cover). Can you please help me with the part description plz?
Just some info for laypeople (like myself) that is not mentioned in this video: this humidifier (at least the one I have in this model) is held together by Torx security AKA “tamper-proof” screws, and you will need a Torx security screwdriver in the correct size to remove them. I ordered some from Amazon and they were too small, so I ordered some larger ones that seemed to fit, however I still have not been able to move the screws at all in order to open the unit and check the fan. If anyone has any other advice I’m here for it, otherwise at this point I’ll probably just get a new humidifier.
Hello Joe and thanks for the helpful video. The blower in the unit is a 24v 0.09A, and I tried replacing it with a 24v 0.10A and it doesn’t turn on. Any thoughts?
Great instructions! I have the model V5100. Appears the fan motor is bad. I cannot find a replacement. Do you know where to find s motor? 120V shaded pole . Thanks
What about the steam sensor/heating element? I fixed the fan but now the mist is intermittent.
Mine just makes a loud noise, I notice the bubbling too.. but it still blows steam like is always does. Would you replace the fan or could it be something else?
I have this same issue did you figure it out?
@@BlackRoses187 it was just the fan in my case. If you want to avoid a noisy room, Please make sure you buy a fan with the correct current rating.
By chance you have a link to that torx bit you used to remove the exterior screws, just want to make sure I get one that’s long enough. Not sure if I want to buy an entire set if I don’t need to
Can you please let me know what model of "ultrasonic mist maker" does this device use because for me that is giving problems
I just purchased this same Vick's humidifier and mine makes a loud bubbling/gurgling sound when it is turned on. I have seen multiple other videos of these humidifiers working silently, including yours! Do you know how to solve this issue to make it not make a bubbling sound when on?
Do you have wiring schematic for the Vicks V4450? The 3 speed power switch fell apart (UV damaged plastic) during disassembly to diagnose why it stopped working. I bought a new switch, but need clear schematic so I can wire it correctly. Thank you.
My problem is that my vicks pads don't seem to work. I put them in the slot but I cannot feel the fragrance. Any solution?
Classic 👌 and helpful
Hi,
Do you know if the same set of new fan work with pure humidifier? I fixed my vicks humidifier. And have an extra new fan which i’m trying use in PURE humidifier
Hi Joe, my cool mist stopped working suddenly. I turn it on, but there's no green light but when I turn it off, it flashes the green light once. Could the fan be faulty?
Has anyone had problems with the floater not raising up? Anyone know were to buy the floater? Thanks!
Thanks... where I can get the rubber washer my tank is leaking
Nice video, Joe. Is there a fuse somewhere inside the case? I had it on trying to get the transducer going and touched the water level sensor (not the model in your demo. mine is V5100NS) and all power stopped.
Thank you... it worked for me..
Sweet! That is awesome!
You made it super easy to repair my humidifier but it's still.ouder than it was before I needed to fix it. Any suggestions?
Hey Joe! I agree with this post, the fab you link is way too loud, like you talk about in the video. You didn’t link the quiet fan.
I did, they keep changing it which is a pain in the ass to keep up with it.
@@Joeteck I understand. I know it’s frustrating. But unfortunately by following you link and buying the fan it is way too loud. It’s the type of fan for 3D printing like you mentioned.
Video was very helpful and followed it perfectly, problem is the fan I bought from the link.
Where do I purchase the fan for the humifiers? Thanks
Hello, I have the same humidifier well it's the 575. I own two of them and the turn dial to turn them on has seized up so I cannot turn it on or off. Do you have any information on this? I haven't tried prying it to turn it because I don't want to break it.
Have youve taken it apart? Thats just a speed control and power switch. I would love to see 👀 what it looks like.
I just ordered the fan from the Amazon link above. I reviewed the specs again and the linked fan is a 12V/.15A fan. I have a feeling that this is NOT the correct fan to order now. Any inputs?
The manufacturer keeps changing the link to the correct product. Make sure it says "quite"
The Amazon link for the fans the original high volume fan.
They continue to change it, I have no idea why
I just successfully replaced the fan, but I discovered a new problem: The shutoff isn't working properly. The ultrasonic element does go lower, but doesn't stop completely, the fan still goes full power, and the LED on the knob stays green instead of turning red. It seems to work by the magnet pulling apart two small bars in a switch-in-a-tube element; maybe over a long time they've somehow gotten too stiff to be pulled far enough apart or something? It doesn't look like a part that'd be cheap to replace...
Email me pictures please: joeteck@joetecktips.com
Your link for the fan seems to be for a 12 VDC fan, not 24 VDC. Maybe something has changed on the seller's site.
amzn.to/3EaW1KY yes, they continue to change it
@@Joeteck just installed this from this same link you posted. And it’s still loud. Any other’s in mind?
@@fezzaid18 that's the correct one. No Idea
I try to do the same and change that’s but still Nothing 🥺
Will you help me fix my Because I have asked
HOW?
some one please, mine is not so much a hardware problem. But I used...I think the wrong oils, first eucalyptus oil then the essential oils. now its like the there is a build up that seems like its burnt on the inside and so I thought this will just be how the inside of my humidifier looks...so I just continue to drop the essential oils and turn it on but its like it doesn't blow nice and strong and also It doesn't smell so good. I want to say I have tried everything to get it cleaned but nothing.
You broke it. It's a humidifier for water, not oil.. I guess you didn't read the instructions..
@@Joeteck 🥹🥹🥹🥹🥹
@@Joeteck But I've been using oils, and even some coals especially during covid. then I would just clean it then its business as usual. I suppose I should not have changed the type of oil. so devastating.
The link to Amazon given shows 5v fan, not 24v as requred.
Ok, thank you. Ill change it
Hey joe your link defaults to 12v set of fans. Should i get the 24v or is the 12v the best option?
No, 24v.. the company may have changed the product
Hi , Please share the link where i can buy the fan for my humidifier
Its in the description, but here it is: amzn.to/2qyelv4
I have the same one but it makes a weird eeeeeee sound how can I fix it
Fan is probably bad, just open it up and look for the eeeeeee sound.
I got the new fan, the humidity doesn’t travel up, also it’s leaking. I’ve been trying find videos to help and I’m having trouble finding anything.
Yeah me too I changed the blower but it didn't fix it
I have a HuPro Electric static humidifier. Plugged into AC machine will not work outlet works units full of water indicator lights will not turn on using the remote or the display on the machine. have the machine broken down to the circuit boards. Wondering if you can help me find the problem with a multi meter. Thanks.
See if there is a board mounted fuse. It will be labeled "F1"
@@Joeteck I'll check and get back to you
can I send you a photo of the board itself?
@@josephvictor9141 Yes... JoeteckTips@gmail.com
Good video, but waht are the specs for the fan?
Need to watch the video
Replaced the fan but same problem it is giving only bubbles no stream, can you please let me know how to fix?
Is the fan spinning, and did you put it back in the same location location so the air flow is blowing into the tube?
@@Joeteck yes have put the fan back to the position, it spins fine and air also comes but the ultradisc like element is still giving bubbles and no stream
What's the proper link for that fan?
amzn.to/3JGy0MM
My fan works ok but unit
Makes loud gulping noise?
Water going into the humidifier section
i love the beat on the back... what the name of the song ?
As a content creator, CZcams gives us music to use royalty free. I would have to go through all of my music to tell you the name of it.
Well, replaced the fan today, but it seems like the fan blows too hard and no cool mist comes out. Also noticed that the fan blows at the same speed regardless of the knob position. :(
You bought the wrong fan type. Too high of amp rating. I mentioned it in the video. The fan speed should always be the same speed. Just the amount of mist that is released. You shouldn't hear the fan loudly. slight fan noise you should hear.
Joeteck I bought the one that was linked in the description. Is there a different type we should try?
Hey Joe, when trying to use ours on full power, it only mists at full power if we apply pressure to the knob. Any thoughts on what is wrong?
What's the current/power rating supposed to be on these? I threw the original one away and the replacement is much louder and very little mist comes out. Probably to high of a current rating. But it's not even on the label so don't know what it is.
0.10 amps, maybe 0.15 Amps. Should be listed as Quiet fan
amzn.to/3IVQGHw
@@Joeteck thank you, I'll give it a shot.
I tried this fan and it blew to hard.
Where do we buy the fans for the humifiers per your show?
Don
Link in description
Joeteck where. Is the description?
The problem with mine is that it makes loud noise when I turn it on, a loud kind of winding noise
Fan is bad. That's the problem.
These types of humidifiers seem to have a problem with leaking. Could you also do a video covering how to fix that issue? I can't find any help online and am afraid to run mine anymore for fear of electrocuting someone and/or causing a lot of water damage to my floor.
After opening the unit and identifying that the blower fan wasn’t working, I replaced it with a new 24v .1a 5015mm fan. However, I’m still not getting any power to the new one. Any ideas why?
Bad power supply probably.
Like bad power supply to only the blower fan? Is there a way to isolate what the problem piece is and replace it? I’m getting power to create the mist and I have the green indicator light when the switch is on.
@@aaronblaser8655 do you have the identical humidifier as myself? If so I would need to take mine apart again and reverse engineer the board. Not that difficult, I would need to isolate the 24v circuit.
@@Joeteck not identical, it’s model VUL520W. However, the interior looks damn near identical to yours
Hi @@Joeteck Just wanted to check and see if you've had a chance to open yours up to look at the board? Would love to fix the one I have versus throwing it out to buy a new one.
My fan runs am not sensing air flow, I could not see any mist
Make sure it didnt fall out from the outlet. Could have been dropped.
The link in the description is incorrect. Just bought those and the fans are very loud and way too strong. Wondering if you accidentally linked to the first set of fans you got...
Hi Zac. I bought them too and I think I know what you mean. In the video, because they weren't held close to a mic, the impression is that they're silent. When I first turned on the unit before putting it back together, the new fan made a fairly annoying buzzing, but I figured the noise would be softened when I put the unit together, which it was. But I'm going to save the original fan and do what a lot of the other commenters here did: Clean the original and put it back in. I noticed my originale was all gunked up with dust. I also remember that it really wasn't that loud when new and that only after a month or so it started getting all ratchety. But I already reassembled the unit. I know how to do it without looking at the video, so I can replace the new fan with the original at some point. I'm going to hit it with some canned air. Cheers.
@@christopheryochum3602 Yeah I popped my old fan off and tried to clean it and lube it and it must just be a dud. Its rattling all over the place. The new one is so loud for me, the noise is not really reduced by the enclosure at all. I've been searching online for a quiet solution but sadly can't find anything.
@@christopheryochum3602 I can also smell a strong odor coming from the fan, like the motor is burning out or something. All in all not a good setup IMO.
@@zac_holland You're right. It's still disappointing how little the enclosure mitigates the buzzing because I got the humidifier for my dad. It sits about three feet away from his bed, the only saving grace being his deafness to a lot of the frequencies you and I hear. I'll let you know if I find anything out from a legit high-end computer-fan manufacturer, but I'm not seeing any of these little things being made by high-end firms like Noctua.
The air speed has something to do with the sound, but I think a lot of contributing noise is from the bearing and fan-blade shape. I have seven Noctua $20 fans in my self-built PC and they're quieter than anything I've ever used before, and what I used before were fans running at the same speed, so it's not just air making the noise. The bearings are combined hydrodynamic/magnetic proprietary designs that make no noise whatsoever. In their case, the air is, indeed, all you hear.
They're out of Austria, and all they make are computer fans and coolers. I'm going to write them and see if they have anything in the pipeline. Here's a notice from them that they'd come out with a line of 24V fans for industrial use: noctua.at/en/noctua-introduces-24v-industrialppc-fans However, nothing looks like it would fit the application we need. However, I'll write them anyway. Sometimes there are products out there that are not visible on a vendor site for whatever reason.
I'm still going to take an air gun to my original fan and may take the humidifier apart again just to see if I put the original back in what happens. The original honestly wasn't that noisy until a couple months in, so it may have been because of all the dust gunking up the works.
@@zac_holland Gee...from the newly installed fan?
Link shows a high speed fan but doesn’t say quiet. Is it still quiet?
No.. manufacturer keeps changing the link
Quiet version: amzn.to/3Beyrtd
@@Joeteck you’re awesome!! Thanks!!! We made do last night by putting a small fan on the outside of the humidifier. Thanks for helping us with the repair.
@@clarrisabartholomew5163 you're welcome!! Anytime, just ask, I am here!!
@@Joeteck they probably changed it again. Following the link you get the open blade type, not the turbine style.
Hey there my fellow dads
Joe where do I get the fan ?
Link is in the description
Joeteck where
@@donaldkirchberger5791 amzn.to/2qyelv4
Where the eBay link?
Go find it. Sorry
@@Joeteck it didn’t fix the problem. I think it’s the heater that not heating it up anymore
I get the new fan but isn’t working well very poor low steam.
Actually its should be a cool mist not steam.
Joeteck cool mist * no working it all .
@@jecplumber5889 probably not the fan
We're u get the part. E mail me
Its in the description. Listed as quite 24v blower
My humidifier quit working but my fan is still going I can hear it
Thats not the fan.
Omg get another humidifier
Some people like to fix their products. Have you priced them lately? A fan is $10
On no mist just soun
Edit comment and be a bit more descriptive
Joe this mist not a yr old come on little bubble no mist and humming sounds call me 4235256566 sam
Oh good grief, friend.... w/ all that unscrewing, getting the right blower.... I’m going to buy a new unit. 🤷🏽♀️
BTW, would u happen to know the unit’s ‘shelf life,’ if I use it 24/7? I, along w/ My 4yo granddaughter, who comes over 5days/wk, suffer w/ DRY. EYES/NOSES, so it WAS ALWAYS. ON. 🤷🏽♀️