eBike Tuning SpeedBox 2.0 for Yamaha PW Installation Instruction
Vložit
- čas přidán 11. 03. 2020
- SpeedBox - Remove Speed Limit of your Yamaha PW drive!
Available at 👉 www.speedbox-tuning.com/p/spe...
Our social media:
FB: / speedboxen
IG: / speedboxtuning
TT: / speedbox_tuning
TW: / tuningspeedbox
0:01 Introduction
0:28 necessary tools
0:35 Removing the cover
2:03 SpeedBox installation
2:45 Tuning control
4:08 Cover assembly - Sport
Good to see that you guys have a chip for the new PWX2.. i think is one of the easiest and cleanest install you can get with a chip .All plug and play with original connectors. I am very happy with mine, no problems so far and i have put almost 4000km on my Haibike. Good job guys ;)
Thank you. We appreciate your feedback.
01ĺw00
Just bought a speedbox2 for my Yamaha PW. Just 2 small questions, that not used free connector on the vid is that for the lights 36volts? If so guess, that when U switch on the light, the bike is also in speedmode? Thx 4 the good installation vid. Pretty straight forward.
Hi, just ordered one of these, great video, looks really simple.
I just have one question.
You know when you are showing which cables NOT to disconnect, one of them seems to be not connected to anything, what is that one used for?
Would a throttle connect to that??
Thanks
Will speedbox work on my lapierre overvolt 5.5? I'm desperately needing to go quicker on it!!
Hi. I have a 2021 Haibike Hardnine 8 with the 630wh Yamaha PW-ST. Will the Speedbox 2.0 work on my bike?
hi martin do know where the fuse is on the synk drive pro?
Is it compatible with the new app i want to use the ghost modus and bought today a haibike allmtn 2
Do I need one of those big displays screens? I’ve only got the original controller? Thanks.
Will this work for a pw 2015 engine?
0:01 Introduction
0:28 necessary tools
0:35 Removing the cover
2:03 SpeedBox installation
2:45 Tuning control
4:08 Cover assembly
If i get a speedbox installed on my Yamaha motor and something happens to my bike and i need it repaired is there anywhere i can make it so Yamaha cant tell if i have used a speed box ? Any response would be greatly appreciated.
Just remove the chip, they cant tell you had a chip installed, as the chip is plug and play, no wire cutting is ivolved :)
Is there eny risk to the motor breaking down much sooner when you tuning a Ebike motor like this or when you do the trick by moving the magnet an sensor to the crank??
Our experience is that mid drives like Bosch, Yamaha, Shimano and many others can easilly handle the tuning. So no risk. Speed limit is there because of the law, not because of weak motor.
With the current generation of Yamaha motors there are no worries about anti tuning measures like with the newest Bosch motors?
Fortunately, there are no anti tuning measures from Yamaha. We can tune all the Yamaha motors.
@@SpeedBoxTuning not the pw-x2 in the YDX Moro
I have a Lapierre Overvolt 5.5HT 2021, Yamaha PW Series TE Engine & Yamaha Display, the buttons on the display are for lights if fitted ( they are not ) & the Assist switch, will this work for my E bike? Also if I decide to remove the Speedbox to have my E Bike repaired or whatever, will the manufacturer know a Speedbox has been fitted? Thank you.
Following
hello, which speedbox is possible for the GIANT entour E+1 2021 with Yamaha engine. I'd love to hear it, thank you so much
Same question here.
Light button does not do anything on lappiere overvolt yamaha PW TE , up down method works fine. Is this normal? no lights fitted. walk button still works fine.
There is activation by the Walk button on some types of Yamaha displays and then there is activation by the Light button on other types of Yamaha displays. So what you're saying sounds just fine. For all the types of Yamaha displays there is the alternative activation by arrows.
gr8 product..... can this be used for the YAMEE/RATTAN XL FAT TIRE EBIKE ?? if so link me plz
I regret to inform you that SpeedBox is not compatible with your eBike, sorry.
@@SpeedBoxTuning yea thanks ...figured tht alil late ..smh
Will I be able to use the 3.0 in a Yamaha motor ?
Unfortunately not, there is no SpeedBox 3.0 for Yamaha motors.
My bike is a 21 giant explore E+2 gts …….the Speedbox 2.1 is good for me ?
Hello. Yes, it is, but SpeedBox 2.1 is obsolete. Please check newer version www.speedbox-tuning.com/p/speedbox-3-0-for-giant#1687 🙂
My bike is Yamaha Pas Brace, can i use SpeedBox for this bike?
I regret to inform you that SpeedBox is not compatible with your eBike.
Hi, I only seem to be getting 22mph max, I've downloaded an app on my phone to see correct speed.
31 mph is the maximum speed you can reach.
Hi I am getting this too did you manage to fix this ?
@@nicholasmarshall1825 never got it sorted on the end, just left it as it is
Does anyone know which 'speedbox' works for 'Giant grandtour E+ 500 watt (2018)'?I know this Giant Ebike is using a Yamaha Motor, but I don't know which one. Giant also made some small change to it and called it 'SyncDrive'.
By the way, I moved the magnetic gadget to the crank or pedal, but the 25 Kmh speed limit is still there, that's why I'm looking for a 'speedbox'. Thanks for any advice and help!
Hello. It is easy :) You can choose www.speedbox-tuning.com/p/speedbox-3-0-for-giant#1687 or www.speedbox-tuning.com/p/speedbox-3-0-b-tuning-for-giant#1711. If you have other questions, you can contact us at any time via speedbox-tuning.com, FB or IG.
@@SpeedBoxTuning Thanks for the help. One costs 209 Euro, the other costs 309 Euro. That's too much for an 2018 E-bike.
@@zhonggonghao7440 It depends. SpeedBox 3.0 is currently compatible with motors manufactured in 2017-2022. If you buy another e-bike in the future, there's a good chance you'll be able to use the SpeedBox again 🙂
I bought this for my haibike and the connections are completely different,not very happy.
SpeedBox 2.0 for Yamaha PW captured in this video is meant for older type of Yamaha motors (Yamaha PW). Yamaha doesn't produce them anymore. I think that you probably just bought the wrong SpeedBox. If you want us to help, please contact us on info@speedbox-tuning.com
Warum geht bei der speedbox 3.0 beim yamaha hinterher das normale Licht nicht mehr??
Hallo. Wenn Sie Ihre SpeedBox und die Beleuchtung separat steuern möchten, verwenden Sie die Tastenkombination ↑ ↓ ↑ ↓. Durch Drücken der Pfeile in dieser Reihenfolge können Sie die SpeedBox unabhängig von der Lichtsteuerung jederzeit aktivieren und deaktivieren 🙂
Will this work on a pw x2 cheers
Hello. Yes, it works, but only with motors produced by 2018. For newer models we recommend www.speedbox-tuning.com/p/p-speedbox-3-0-for-yamaha#1336 🙂
It is available for giant fathom 2020 e+ 2 ?
Don’t get a badass box, they don’t work on giant fathom 2020
SpeedBox 2.1 for Giant is fully compatible with your eBike.
Is it possible to Turn Off the light Button and only using the +- combination? And when yes, how? Ist it working with giant syncdrive pro/pwx2?
www.speedbox-tuning.com/p/speedbox-2-0-for-yamaha all the answers are on their web page :)
Does this work for PW-ST?
Yes, it does work.
so what is the use of this?
you get motor assistance after 25kph, so you can go faster with the motor assist. When activated, the motor wont cut off the assintance above 25kph, so you can go up to 50kph or more, deppending on how good are you on pedalling..lol
Will this work on the new yamaha 2020 motor
Yes, it will work on 2020 Yamaha motor.
will this work on my yamaha pw series st
they have a chip for all yamaha motors..check their web page :)
Is it the same process for the PW series ST?
yes it does- i just found out
Yes, very similar. You can find the installation video here on our channel.
Dose this stil work on the new generation of pw-st
Hello. Unfortunately, no.
@@SpeedBoxTuning what device would i need then mate?
@@magnusdamstuenpettersen8669 We originally recommended the SpeedBox 3.0 for Yamaha, but there were problems with the PW-ST motors. It is possible that the motor is not suitable for high loads in combination with tuning and there have been cases where the motor overheated.
@@SpeedBoxTuning do you think somthing like the VOLspeed v3 would work?
@@magnusdamstuenpettersen8669 We don't know, ask Volspeed 🙂 But note the sensitivity of the PW-ST motor..
Will distance be better..
No, it won't.
Tänään pitäisi asentaa speedbox omaan pyörään
Move the speed sensor from the wheel to the crankset arm, you have unlimited speed and it's free...
That approach does not always work plus ...your speedometer/odometer (if you have one) reads incorrectly. Also...in an area where the police are cracking down on eBikes , while writing a speeding ticket will ask why the wheel sensor assembly is languishing on the left crank arm. They are not stupid. Answer truthfully or you will get in further trouble. They may iimpound a modified eBIke. In a world where many people hate eBikes, (non-eBike riders included.) it is best to remain stealthy in such matters.
I gained like 5-6 mph. I was expecting more.
dont blame the chip or the bike, blame your legs.. lol im joking... it all deppends on the mode you are and how hard you are pushing the bike. I got double the 25kph speed that my Full FatSix Haibike did originally ... :)
We suggest to change front sprocket for other one with more teeth. SpeedBox is capable to unlock your eBike up to 31 mph. If you are not able to ride that fast, SpeedBox is not what holds you back, the front sprocket is. Please reconsider it and eventually try.
this product is rubbish is not compatible with shimano e 6000
SpeedBox 1.0 for Shimano E6000 is fully compatible with all the E6000 motors. No exceptions. If you need our help, please don't hesitate to contact us on info@speedbox-tuning.com.
Yes, you could spend thousands of dollars on an eBike czcams.com/users/postUgkxUiL0GnyDjP32RJdd660sP8mZk4CRLTCJ and get something much higher quality. However, if you're looking for a basic model to try out eBiking this is a great choice. The assembly is easy as far as bikes go (took about an hour for me to do, I'm not an expert). All tools needed are included. I added the plastic mud guards you see and a more comfortable seat. The other reviews are correct that you're probably going to want a better seat (Giddy Up! Bike Seat is what I got - super comfortable). The battery easily handles a 2-4 hour ride if you add some of your own pedal power. I haven't even gotten it up to top speed yet - it is very fast. Components are not top of the line, but decent for the price and work just fine. It works great on dirt roads and singletrack and pavement although too heavy to do tricks or any serious technical mountain biking. I'm looking forward to using it a lot over the summer. Tons of fun!