I think the guy that designed these crash bars was probably high! Trying to get a torque wrench in that space was almost impossible. I tightened it by hand with a small wrench, and by the time I figured out how to get my torque wrench in that little space, it was already over-torqued. Their torque table also leaves a lot to desire. I hope the quality of the bars itself is better than their design and installation guides. Thanks for the videos! I did both the crash bars and the USB charger at the same time using your videos.
Thanks a couple dozen times for the installation videos Orb. Difficult anyway. Much easier with full instruction videos. I'm doing everything you've done to yours plus lower crash bars and power to the inside of a pannier. Larger Acerbis tank. Wouldn't have liked it without you!!!
I really appreciate you doing the videos man. I’ve had my T7 since last April and as winter is ending I’m going to add protection/lights and center stand to it and I think I’m just going to use all Yamaha parts.
Hey thank you for your nice Video. Yesterday i installed my upper crashbar from touratech. I have to tell you that you dont need the spacers on the bolts under the headlight. I couldnt believe that you have to bend something. So i contacted Them an they Said this to me.
Hello, very good video!! I'm thinking about to buy this crash bars but I'd like to know if they are compatible with high fender kit from camel adv. Could you help me with this?? Thanks!!!!
According to Camel ADV's website, the fender is fastened to the bottom of the lower triple clamp with a custom aluminum bracket; i.e. the top of the fender is just below the triple clamp. If you draw a line horizontally out from the front part of the bottom of the triple clamp, the distance from the bottom of the Touratech crash bars to that line is 7/8" - 20 mm; i.e. there should be clearance between the bottom of the crash bars and the top of the fender, but it depends on what fender you end up with and how tall the fender is.
I did not like the lines of the original Yamaha bars, the Yamaha bars cover up the Ténéré 700 logo on the side panels. Also the Touratech bars have the cleanest lines.
Thank you so much for this video! My install was flawless because of your work 😊
I think the guy that designed these crash bars was probably high! Trying to get a torque wrench in that space was almost impossible. I tightened it by hand with a small wrench, and by the time I figured out how to get my torque wrench in that little space, it was already over-torqued. Their torque table also leaves a lot to desire. I hope the quality of the bars itself is better than their design and installation guides. Thanks for the videos! I did both the crash bars and the USB charger at the same time using your videos.
Exceptional review , please keep posting any and all modifications. I’m currently waiting for my 2022 T-700 as of January 2022. Thanks
So glad I found this channel!
Thanks a couple dozen times for the installation videos Orb. Difficult anyway. Much easier with full instruction videos. I'm doing everything you've done to yours plus lower crash bars and power to the inside of a pannier. Larger Acerbis tank. Wouldn't have liked it without you!!!
I really appreciate you doing the videos man. I’ve had my T7 since last April and as winter is ending I’m going to add protection/lights and center stand to it and I think I’m just going to use all Yamaha parts.
Great videos and very professional camera work.
Thanks
Great videos, informative !
Mr. Sven and Mr. orbsurfer are my go-to choice for insights and upgrade tutorials on the T7 .
Looks good
Hey thank you for your nice Video. Yesterday i installed my upper crashbar from touratech. I have to tell you that you dont need the spacers on the bolts under the headlight.
I couldnt believe that you have to bend something. So i contacted Them an they Said this to me.
wow, what an amazing video! thank you for sharing...
How have they held up. Solid protection?
Does these crash bars fit T7 explore ?
Do you still use the TT bars on your bike after 1 year?
Hello, very good video!! I'm thinking about to buy this crash bars but I'd like to know if they are compatible with high fender kit from camel adv.
Could you help me with this??
Thanks!!!!
According to Camel ADV's website, the fender is fastened to the bottom of the lower triple clamp with a custom aluminum bracket; i.e. the top of the fender is just below the triple clamp.
If you draw a line horizontally out from the front part of the bottom of the triple clamp, the distance from the bottom of the Touratech crash bars to that line is 7/8" - 20 mm; i.e. there should be clearance between the bottom of the crash bars and the top of the fender, but it depends on what fender you end up with and how tall the fender is.
@@orbsurfer8195 thanks, very good and complete answer!
Great video! Have you considered the lower Touratech crash bars as well and do you know if they are compatible with the OEM upgraded skid plate?
No, I have not, and do not know if the lower crash bars are compatible with the upgraded Yamaha skid plate.
I am just curious, why did you choose Touratech ? and what is your opinion on the Yamaha protection bars?.
I did not like the lines of the original Yamaha bars, the Yamaha bars cover up the Ténéré 700 logo on the side panels. Also the Touratech bars have the cleanest lines.
@@orbsurfer8195 do they seem any different purely in terms of protection? Or is it mostly an esthetic upgrade for you?