How to Replace Rear Wheel Bearing and Hub 2003-2007 Nissan Murano

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASHR00251
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2003-2007 Nissan Murano.
This process should be similar on the following vehicles:
2003 Nissan Murano
2004 Nissan Murano
2005 Nissan Murano
2006 Nissan Murano
2007 Nissan Murano
Tools you will need:
• Pry Bar 1aau.to/odA/1AXAA00020
• 14mm Wrench 1aau.to/odD/1AXAA00010
• 19mm Wrench 1aau.to/odD/1AXAA00010
• 14mm Socket 1aau.to/onM/1AXAA00015
• 18mm Socket 1aau.to/ofR/1AXAA00043
• 19mm Socket 1aau.to/ofR/1AXAA00043
• 21mm Socket 1aau.to/ofR/1AXAA00043
• 32mm Socket 1aau.to/ot/1AAST00003
• Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/ok/1AXAA00288
• Pliers
• Air Chisel 1aau.to/om/1AXAA00270
• Ratchet 1aau.to/ooX/1AXAA00016
• Socket Extensions 1aau.to/onM/1AXAA00015
• Torque Wrench 1aau.to/oh3/1AXAA00044
• Anti-Seize Grease
• Hammer 1aau.to/odB/1AXAA00091
• Rubber Mallet 1aau.to/o2/1AXAA00413
• Wire Brush 1aau.to/oa4/1AXAA00079
Subscribe: / @trq
Check out our playlist:
Nissan Murano 2003-2007 1st Generation: • Nissan Murano 2003-200...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*

[@marcusdarnell3348]

Great video can you use a regular ratchet and wrench to get the caliper bolt out?

[@sut3613]

Buen video

[@FifthBoy]

My 2005=35mm spindle nut.