Audi A6 ESP/ABS, TPMS, Parking brake malfunctions fix

Sdílet
Vložit
  • čas přidán 30. 01. 2024
  • Replacing ABS wheel speed sensor on a 2012 Audi A6 (C7) to fix ESP/ABS, TPMS, Parking brake malfunctions
  • Krátké a kreslené filmy

Komentáře • 11

  • @Marvelous711
    @Marvelous711 Před 2 měsíci +1

    This is awesome and thanks for the video. Was having similaelr problems and now I did what you did and its all good. Thank you

  • @jiujitsuhuntsman
    @jiujitsuhuntsman Před 14 hodinami

    You didn't mention the parking brake issue...

  • @perinpanathansancikan7937

    My car has the same issue and it says rear left sensor. I am confused as there are only front right and left. Which one should I buy?

  • @ruibraz4629
    @ruibraz4629 Před 6 dny

    I have a parking brake error and my car doesn’t start (Audi A4 B8).
    Sometimes, my car starts, but sometimes, it doesn’t.
    For example, yesterday morning, it started and I made 2 stops during the trip. Then, when I tried to continue the trip, it didn’t start at all.
    One month ago, it happened and I took my car to the garage, but the mechanic didn’t identify the problem. When he tried to start my car, it worked and the mechanic told me that the car was okay, but it isn’t because now I have the same problem.
    Can you help me? PM me if you prefer.

    • @PoetsTrees
      @PoetsTrees Před dnem

      I would get a second opinion. This sounds like a fuel pump or possible fuel pressure sensor issue. Have them inspect both. Hopefully, this is not the issue, but I also would not be surprised if it is.

  • @kyleman2323
    @kyleman2323 Před 3 měsíci +2

    Could you start the car with all these faults? Im having the samuw issue but the car will not start

    • @luismarin8710
      @luismarin8710 Před měsícem +1

      Did you fix the issue?

    • @elhinho7015
      @elhinho7015 Před 29 dny

      @kyleman2323 did you fix the issue? I have same problem rn

  • @PoetsTrees
    @PoetsTrees Před měsícem +1

    Is it possible that it could be anything else ? Have the same issues, changed speed sensor and wheel bearing, and errors are still active.

    • @ronnbot
      @ronnbot  Před měsícem +1

      Could be the wire/cable to the speed sensor. An ODB-II scanner can help diagnose.

    • @PoetsTrees
      @PoetsTrees Před dnem +1

      @ronnbot Just wanted to give an update. It was corrosion that started on the brakepad wires and transferred into the harness. Once the corroded wiring and the ABS wiring harness were replaced, everything went back to normal.