making electromagnetic knife making vise
Vložit
- čas přidán 21. 09. 2021
- In this video I show how to make electromagnet knife making vise. It base on door electromagnetic locker- works on 12DC current so it safe in use.
hardware parts:
65/75mm pipe (400mm) - (50mm and 350mm pieces)
83/91mm pipe (140mm) - (50mm and 90mm pieces)
100x100x10mm flat bar - hinge
100x500x3mm steel sheet - (covers)
100x100 square (50mm) - "electric box"
180x250x8mm flat bar - base
M10 nut
M10 rod
round M10 "handle balls"
m4 screws
epoxy
wire Conduit
electrics:
electromagnetic door lock www.amazon.com/OBO-HANDS-Fail...
12DC transformer
230AC signal diod
on/off switch (230V)
2m electric cable
cable gland
electic plug
I hope you will enjoy this video:)!
Cheers, D.
-------------------------------------------------------------------------
If you like what I do subscribe the channel:
/ @dbcraftworld
Support me on patreon:
www.patreon.com/user?u=48884865
follow me on Facebook:
/ dbcraftworld-112447110...
follow me on Instagram:
/ dbcraftworld
Follow me on Tiktok:
DB Craft World
Follow me on Reddit:
/ dbcraftworld
#knifemakingvise
#dbcraftworld
#diyvise - Jak na to + styl
David: Knife-Maker, Sword-Maker, and Electro Magnetic Wizard! 😁 I don't mind either one, music, or no music. How about whatever is easier for you to edit with all of the footage of you working?
haha! Thanks Ozzy! You're my Man👊!!
Most people are not aware of how long post-production takes- I totally understand it, cause I was one of them. There was a time I spent 2-3h on searching a music (madness!).
Right now I'm trying to find the most optimal and effective way to do video faster.. I'm just tired of working 14h/7 😅
Great video! The new forum, without music, is much better in my opinion! Thanks for sharing!!! 😎👍🏻🔨🔥🗡️
I'm not sure if we spoke before, so Hi Bob! Thank you:)! If you prefere video without music I'll probably go with new form (without it). It's also less work in post production to me:). Thanks for sharing your thoughts:)! Regards, David
That's a sainthood idea and design! Thank you for sharing it.
haha Thank you Bjorn:)! Oh, and you just remind me that I didn't paste the part list into the description! I'll do it now:)!
That is amazing great job 👍👍👍
Hi Chris! Thanks a lot! Please, tell me, which form (with or without music) you prefer more? Regards, David
Slick idea!
Thanks a lot Mate!
wohohoo,,,...nice build mate,,,
my opinion -no music- 😃
Thanks Goran! There is much less work with video when you don't put music to, so I prefer this convention more:). Thanks a lot for the advice Mate:)!
Keep this form! TFS, GB :)
Thanks Man! I'll keep the form without the music :)
@@DBCraftWorld Oh BTW, neat idea and execution! GB :)
Thank you :)!
What an excellent job, David! That thing looks very handy and will probably be a lot of fun to work with in the future.
On the topic of music: I thought about that in my own videos aswell and started putting in less music because it takes a lot of work to search and sync footage etc. (but you know that 😄) I still decided to keep some music because its fun for me to edit around that rather than throw a bunch of footage after another. In my personal viewing habits I found that I often tend to skip forward on trivial work like grinding and drilling so I figured others will probably do that aswell and maybe some music synced to the task might help with viewer retention. You should probably stick to what works best for you while still being some fun for you aswell. You're banging out a lot of content for us and with how much time post production takes it would be a shame if its just tedious work for you.
P.S. Sorry for the wall of text 😄✌
Have a good one!
"Wall of text is always welcome" 😄!
I wanted to make customize tool. design directly to my needs- It's heavy, solid AND it's got features I couldn't find anywhere. I'll definitely use it on the next video (you will love the next episode - I promise):)!
About the music: I'm trying to find the balance between simplicity of post production and video attractiveness. Right now, I'm checking how audience will respond to video without music. Your suggestion is great and I'll follow it Thanks Sven 👊!
@@DBCraftWorld heavy and solid alone is a win in my books 😄
I‘m excited to see it in action on that project
@@NjordArtisan Cant agree more- HEAVY and SOLID (but most of the time HEAVY=SOLID :P) is enough (lol)
You will see much more than that:)!
came here from your other video.
no risk of shock when the switch is on?
Hey Andrew! thanks a lot for the interest. There is no risk at all- this electromagnet works on 12V so it's 100% safe. But I'm glad that you ask about that:)! Regards, David
How much for one?
This is for me, but I can make another. Send me a private message on dbcraftworld@gmail.com
wow
Hi Robert! Thanks for the comment - I'm glad that you like it! Regards David
@@DBCraftWorld I greet from the Czech Republic, I also try to make knives but I have to buy a belt grinder, without it it's not, I grind it with an angle grinder, it's inaccurate, I had the material from a circular saw plate, it wants better tools, I will make handles from resin, I bought a vacuum pump via ebay but I can't run it at 110 volts ... (: so guut luck
@@robertsotkowsky7974 If you have welder, buy wheels for a belt grinder and make it. You can make simple belt grinder with very little cost.
@@DBCraftWorld I have a welder I am a welder, / electrode, MAG, TIG / but at home I only have a welder for the electrode, yeah a good type but where to get a motor? and what would be good ..?
@@robertsotkowsky7974 I use 1,5kW 2800rpm 3 phase motor. If you are welder making belt grinder should be easy, but you must keep everything straight- so don't weld too much on one side cause the steel gonna bend (even the thick one) during cooling down