Great kit and I was gonna get one for myself for my birthday today but then I saw that it's $740.00 on Amazon!! I might get myself the $240.00 kit, that seems to have everything that I need in it.
I just got the all in one kit with the red torque driver and blue mini torque driver from paramount tactical for $210 oit the door with coupon, I was gonna get the one off Amazon but its $260 and only has the red full size torque driver. You probably already got urs, if so how do u like it?
So this is my luck with Brownell's lately. I need a part, sights, tools, whatever, and I look at Brownell's, and every time it is out of stock. I just looked for this kit, and it is out of stock.
I have a couple of the smaller kits that I have assigned to specific weapons platforms and they are high quality components and a must have on the field
Oh damn, I desire it... Would save me so much time and face on the range, when I'm fixing stuff for other people... My poor beaten up punches and bits... I would add some basic needle files to it, and obviously the irreplaceable automatic center punch... and one of those tiny hammers with exchangeable heads *steel, brass & polymer). And then I guess that's really all one could want from a kit like this... Love it
That's actually on my birthday list. I will probably get it because I have a comp M5S on the list as well. I'm sure the wife doesn't wanna spend 1k on an optic and mount.
What? No hammer? I was gifted a goofy multi-tool a couple of years ago. It has a small hammer as one of the primary tools. I need this Fix-It kit to store it in.
@Caleb Looks like you're getting close to the age of reading glasses! Your arms don't seem to be quite long enough to read the destructions' fine printing
There is a difference between intriduction of new videos. However shall we confirm even if there are more than 1 or 2 videos. We should see or watch. Or it does not required a 30 minutes preview. Of it is required in CZcams I think 1 Notification is enough???
These guys must've been former Snap on dealers because da-yuuam... that's freaking expensive. This is coming from a guy who has Radians, ADMs, DDs, PWS', and a lot of expensive equipment.
I think it's hilarious that Caleb calls them destructions. I've been saying it that way for years. 🤣
Cleaning kit in that outside pouch and a small nylon/brass hammer combo, nice setup.
I have a different set from them and highly recommend it. The quality of the individual components is very high.
Great kit and I was gonna get one for myself for my birthday today but then I saw that it's $740.00 on Amazon!! I might get myself the $240.00 kit, that seems to have everything that I need in it.
I just got the all in one kit with the red torque driver and blue mini torque driver from paramount tactical for $210 oit the door with coupon, I was gonna get the one off Amazon but its $260 and only has the red full size torque driver. You probably already got urs, if so how do u like it?
They are cool tools but they are awfully proud of them.
Buy once, cry once.
@jeffersontool no for what they want for it I would definitely be crying a lot more than once.
About $740 worth of pride.
Think Caleb was out late last night on this one 😂😂😂😂😂, "you know this goes here", "and this is like wow". Lol love the vids!
So this is my luck with Brownell's lately. I need a part, sights, tools, whatever, and I look at Brownell's, and every time it is out of stock. I just looked for this kit, and it is out of stock.
I have the ar kit & use it at work, my wife got it for me for C'mas & she has added to it over the years. Happy customer 👍
It's a nice kit but not $650 nice...
right lol mfs are high as hell. theyre made in Taiwan by slaves
Have you seen the price of any of their kits?
The Field Armorer's Tool Kit for all that? That looks pretty sweet, I tell ya' h'wat🤠
excellent tools - recommend them on all my armourer courses.
I have some of the kits they are great!!! ❤
This would be great for a range bag. Especially if your going out for a day full of shooting with many different guns.
It seems this is Caleb's first look at it too 😂
I really want a closer look at both of those coffee cups. ☕️
I have a couple of the smaller kits that I have assigned to specific weapons platforms and they are high quality components and a must have on the field
Oh damn, I desire it... Would save me so much time and face on the range, when I'm fixing stuff for other people... My poor beaten up punches and bits... I would add some basic needle files to it, and obviously the irreplaceable automatic center punch... and one of those tiny hammers with exchangeable heads *steel, brass & polymer). And then I guess that's really all one could want from a kit like this... Love it
I was thinking along the same lines for additions to this kit, all of which wouldn't add to much more bulk to the range bag.
That's actually on my birthday list. I will probably get it because I have a comp M5S on the list as well. I'm sure the wife doesn't wanna spend 1k on an optic and mount.
They are nice but not priced for the every day average Joe the kit shown is expensive but very nice also
Now I've figured out where I went wrong, I bought a complete kit of BREAK-it-stix
Looks very comprehensive.
Does it have a half moon Sig 226 punch?
Or maybe blanks to make special punches out of?
Perfect!
Are there any brass punches so you don't mare everything up?
I love my fix it sticks torque wrenches but the bits that come with them are pretty low quality
Thanks fellas!
Noticed it has a few empty slots so you can put your own pixie stix in there.
Barbour Creek shooting school like fixit sticks
Oooh, shiny gadgets.
3:09 Steve’s face here haha
I almost bought this(or something mighty similar)...but it was out of stock. Grabbed the Wheeler stuff instead.
Sorry but doesn't a 4lb hammer solve any problem?
$600+ - but still its a nice set
Nope, im out
Hopefully this is better than the gun cleaning kit I bought from them, which was crap.
Caleb, when are you boys @ Brownells gonna get a steady supply of bone charcoal?
And they are out of stock
Caleb must have double brewed the coffee this morning, because he is amped.
What? No hammer? I was gifted a goofy multi-tool a couple of years ago. It has a small hammer as one of the primary tools. I need this Fix-It kit to store it in.
I could retire my old tackle box.
I picked up a set from China for 39.99.
Can it remove the gas plug put upside down in the L85A1?
Did it have an armorer's hammer?
The brass thing attaches to the t-handle to form a hammer.
Would include a nylon, plastic or rubber head as well?
@@DLFerg0369 I have only seen the brass one on the Fix It Sticks website.
What range of torque wrenches?
Out of stock😂
@Caleb
Looks like you're getting close to the age of reading glasses! Your arms don't seem to be quite long enough to read the destructions' fine printing
HEY! Where's the link to buy it on Brownells???????????????????
Sold out
Probably doesn't have a pop-up workbench or gun vise.
You can buy a brand new AR-15 for how much that cost. Nice kit but holy cow. 😮
I drove a 1964 Torque once. Wasn't fast, but man, was it a tire twister.
There is a difference between intriduction of new videos. However shall we confirm even if there are more than 1 or 2 videos. We should see or watch. Or it does not required a 30 minutes preview. Of it is required in CZcams I think 1 Notification is enough???
Way out of my budget. Cool tool set though.
These guys must've been former Snap on dealers because da-yuuam... that's freaking expensive.
This is coming from a guy who has Radians, ADMs, DDs, PWS', and a lot of expensive equipment.
750$
Great piece of kit but at $500+ come on....
Soooooo expensive
Caleb we expect more from you. At least open it and be prepared to talk about it off camera before you press record. Cmon man.
Fish sticks?
Yes, Cod fish sticks.
And all it costs is your first born.
$600??? Nope
$600+ for $50 worth of Taiwan made mini tools…nah. Hard pass.
import steel junk