SOLMETRIC PV Analizer I-V Curve Tracer SPVA-1000S Kit - How To Guide | RENVU

RENVU Solar Equipment Distribution
For more technical info visit: www.renvu.com/Tools/Troublesho...
I-V Curves and PV Performance Verification
PVA-1000S PV Analyzer Kit is a 1000 volt I-V curve tracer with built-in PV performance modeling and advanced wireless irradiance, temperature and tilt sensing. It provides unprecedented measurement throughput and accuracy and delivers deep insight into the performance of your arrays.
For each string, the PV Analyzer measures the I-V (current vs. voltage) and P-V (power vs. voltage) curves with a single button click. The measured results are compared to the expected performance, taking into account the irradiance and module cell temperature at the time of the I-V measurement. The I-V Unit communicates wirelessly to your Windows tablet or laptop (not included), enhancing safety and allowing freedom of movement during testing. Automated data analysis and reporting save you time.
The PV Analyzer is designed to work as hard as you do. High measurement throughput means it can measure 1 MW in less than 2 hours--even in hot environments where other curve tracers shut down. The rugged enclosure is moisture and dust resistant. The incident angle corrected SolSensor is able to make accurate irradiance readings in lower light conditions extending your working window.
I-V curve testing is the preferred method for commissioning, O&M, and troubleshooting of PV arrays because it provides the most complete performance measurement possible. Populations of curves can be analyzed quickly for outliers and data can be archived as a baseline for future reference if performance questions arise.
Included with the PVA-1000S
SolSensor Wireless PV Reference Sensor (included): Irradiance, module temperature, and tilt readings are captured at the instant the I-V curve is measured. Improves effectiveness of expected performance models. The SolSensor has a range of more than 300 ft and includes a module rail clamp and precision mounting system for POA alignment.
PVA Test Leads (included): Alligator-clips enable connecting directly to combiner box bus-bars. more...
I-V Data Analysis Tool (included): Excel macro for analysis of populations of curves and data plus report generation.
Options
Megger MIT430 (option): Find pinched wires and leakage problems before they become dangerous with the Megger® Insulation Resistance Tester. The PV Analyzer software manages your meg-test data. more...
2 year Extended Warranty (option): Extends PVA-1000 warranty from one to two years.
Startup Training (option): 90 minutes of live expert training on how to effectively and safely use the PV Analyzer.
Features◦Measures and displays I-V and P-V curves and key parameter values.
Advanced built-in PV models provide immediate PV performance checking.
Database of more than 10,000 modules, with automatic updates.
Automates data management, analysis, and reporting.
Measures string-after-string, combiner-after-combiner, without overheating or slowing down your measurements.
Clear, colorful, touch-capable software runs on your tablet or notebook PC, providing rich insight into PV performance.
Accurately measures high-efficiency modules and strings.
Wireless interfaces for faster setup, safer work environment, and freedom of movement during PV troubleshooting.

[@amirolfati3723]

Hi friend,
Thank you for sharing valuable knowledge with us. It was literally useful.
Could you please direct me about difination new panel in Solmetric library, as you know, panel datasheet have not some information such as:
Temp. Coeff of nominal current,
Temp. Coeff of Vmp,
Temp. Coeff of Imp,
Vmp at 200w/m2
Imp at 200w/m2
And Identity factor(Aref)
Thank you in advance for your support

[@RENVU]

Hi Amir, thank you for reaching out. We suggest reaching out to Solmetric for support. Their team will provide you with the best answers. Here is a link to their support page: www.solmetric.com/support-info.html. Cheers!

[@amirolfati3723]

Thanks again for your patience ❤️,
All the best for you.
Happy Christmas

[@davidmacminn8658]

that guy should really open his fuses BEFORE he attaches his alligator clips...

[@NoName-rn2bg]

BWAHAHAHAHA - finally someone caught that!! BRAVO for safety!!