Video

Hmm. You should rename the video to what Microinverters can do. This says nothing about what turns them on, how long do they take to turn on, how do they communicate with a hub……..🙄

I need tech support please. Do you have a number I can call. I had a solar system installed on my home. The installer went bankrupt,, please, I need help

String fuses?

Now just to commission 🤔

does it matter which cable goes to which side?

Hey sir am on the job side but this connection you just show how to removed it??

Time of use does not back up breakers right?

@renvu can you explain what the neutral is used for ? Im only familiar with iq7 and iq8 systems which dont have neutrals in the trunk cable. I ran into an old m215 system today and i saw the neutral and it had me curious as to what it could be used for. I assume it could be used for grid sensing maybe but i really dont know. If some light could get shed on this id appreciate it.

It's almost 2024 and solar companies in Northern California are proposing IQ6+. I can't find any videos comparing the IQ6+ and the new IQ8.

can a private person buy from you guys? or its only for Contractors/installers? I tried to create an account but its asking me for Company I don't have a company.

Hi sir, i have problem in my inverter , the varistor of ac output was burning, and the switch on display is open, how the problem occur and how to repair it? Thank you

What battery do we connect the sunny tripower to? What terminal Voltage? Can we use series of gel batteries?

I have a Verizon gateway wireless modem, which is a CDMA cellular service not GSM like T-Mobile. Can I monitor my system with CDMA? If so, how can I do it?

I find all of the RenVu training sessions to be extremely timely and valuable! Please keep them coming!💡

Thanks for the presentation. I have a question for the folks at Enel X. A company called Enteligent announced (back in January, I believe) a residential/commercial "Hybrid DC Bi-Directional Fast EV Charger" which is not only bi-directional, but can charge an EV with DC current coming from PV panels (without having to be inverted to AC current first). It can also charge from AC current only (like most EV chargers) or combine both so that it can charge "up to three times faster than AC Level 2 EV chargers". It does this by integrating with solar inverters (such as the Sol-Ark). I think it is now in beta release/testing. Do you have any plans to provide any such capabilities (the one of primary interest is taking DC current from the panels going direct to the EV without doing a "double inversion" of DC->AC->DC)? The Web page describing the device is here: enteligent.com/dc-coupled-dc-evses

How do you torque the squeeze connector to 7nm?

Where can I get this tool

Useless video - too old should be taken out or replace with new equipment.

is this product even available any longer?

how are the inverters connected for large sstems? Like 3 x 30 KW/480V inverters? Simply join them using a junction box with breakers🤔?

excellent panneaux excellent rendement...

تم

Is there a video for enphase 8 version?

thanks, good to see that a pilot hole is drilled for the lag screw

You should be ashamed the speaker is not familiar with solar and did not answer questions, you did a poor job at passing on questions

Can residential projects be supported now

hi thanks for this video i need know the nameplate of the smawebbox charger

Good, do you have a solar design stimulation software ?

So seen its 67.99 per unit, and it takes 2 of these just for 1 panel. For a molded plastic piece that seems way over priced for a ground mount array. Yea I know some will say it's simpler but I think it's not as simple as stated. Ground needs to be very level to mount. U gotta get material to fill bin. Easier to dig a low rack array set 4 post, level it and for like and set 4 panels for half the price. Just don't see these costing over 25 bucks at most basically a plastic bucket with holes and clips

I have 10 Eflex 5.4K batteries attached to a Sol-Ark hardened inverter. Any idea of how these batteries would do in an EMP event? Will the batteries be damaged or just the BMS or will they all survive? The batteries are in a metal cabinet (underbed truck tool box) sitting on a foam garage floor bad.

what size panel is recommended for this, Can I use the Renogy 320 watt panel? I would need 4 of these for 2 panels right?

I want enough power to expand and be off grid to support 4 buildings and lots of pumps etc. All off grid cost is no problem Just want away from government bills

Hola. Tengo una pregunta pero en español. Podrían atenderme? Cuando el inversor suministrara energía en 480 v a un panel de servicio trifásico conexión estrella, en el inversor se debe instalar un puente entre la terminal del neutro y la de puesta a tierra?

How do you disconnect the cables from the microinverter once it is connected?

Overall an interesting solution. Thanks to Renvu and SimpliPhi for the presentation. Re: the comment that the inverter has a switchover time of "8ms which is pretty much the fastest on the market, as far as I'm aware" : Sol-Ark has 4ms for their 12K model and 5ms for their newer 15K model. I mean no offense, but since SimpliFi sells an product that integrates their battery with the Sol-Ark 12K (SimpliPhi Power AccESS Sol-Ark 12k Inverter / 22.8kWh LFP Battery ESS A-6PHI-SA-12), I would think that you would be aware of this. Question: Where is your inverter manufactured and by whom? Suggestion: Since the Gateway has a "User friendly Linux OS", why not add a simple HTTP server so that users that don't want to use the cloud to view settings or data can just access the Gateway via a specific IP address or URL (like my FiOS router provides), so I can communicate directly with the system via any Web browser (on my desktop, laptop, tablet, etc.)? It's great that your Google Cloud specifies servers in the U.S., but many users want to avoid having our info on "the cloud" altogether. Another suggestion: firmware updates should have the option to be automatic or explicit. The explicit option would be that the user downloads the firmware update via the app (not preferable), or by downloading locally to their PC/laptop/tablet, and then using the above suggested Web interface via HTTP server in the Gateway to install (much more preferred). One more: the end user/homeowner should have the final say over whether they have "Pro" access to the inverter and ESS. If they have to sign a waiver regarding risks of wrong settings: so be it.

Sure seems like a good solar outfit would just install this in the first place for 40 bucks!

Can you please tell me how many gallons of water approximately can fit in it?

Good day, is it possible for you to tell me what settings you had put in to get the inverter to work please? I already have the technician code to enter the settings.

It’s the MIN series stackable? I have a 25kw array and would need two 11.4 inverters. One of the slides showed an install with 2 inverters and 3 batteries but didn’t mention if you could stack or run multiple inverters of a large battery bank and combine their output to one critical loads panel thereby increasing the amp capacity, like you can with a Sol-Ark. Or are you stuck with 2 separate systems, with 2 separate battery banks and 2 separate critical loads panels? Also when the new solution to the current ATS and ARO comes out will the current MIN inverters be compatible? This was kind of asked in the Q&A but not adequately answered. I need to add inverters to my new array and could wait for the whole home battery backup but it would be pretty crappy if I buy new 11.4 inverters today that will be outdated in a couple months and can’t be used with the new whole home backup solution.

Is it an off grid or an in grid inverter?

How does the unit in the panel communicate with the device that's connected to the router?

Where to the AC wires go? Into a breaker on the main panel? Or? Also do you need a special meter or anything from your local utility? Thanks

This was so much fun!

So i can use all the solar installed equipment and not route to my internal home circuit panel?

If batery is totally discharged, how could turn on the BMS?

how much is e gauge , and how can i buy one , am in kenya

What is the price per Wh for your Eguana ESS 5 KW/13 KWH as it is per you say the cheapest energy storage in the USA market?

That's the weirdest way of saying "erm" I have yet to perform an "erm" count.

"E-stop" seems to be the switch name that Greg was struggling for. If you ever want to have some fun, look up ISO 13849 for CE safety circuit requirements of machinery. Been there, done that.... while designing panel building automation equipment ironically. I was a Komax design engineer. Don't hold it against me... Thanks for the information in the video.