Lathe - Rolling tool for perfect smooth surface
Vložit
- čas přidán 22. 03. 2024
- Rolling tool for permanent mirror deformation
• Vice for lathe no vibr...
• Lathe Sharpening Machi...
• Lathe, 360 degree divider
• Lathe - Collet Drill ER32
• Threading - Column Tap - Jak na to + styl
Bravo Maurizio, non c'è niente da fare ma l'Emilia Romagna è la patria della meccanica , persone come te dovrebbero essere assunte nelle scuole professionali a trasferire questi talenti! Buona Pasqua !
Grazie mille Paolo, beh c'è di meglio, Buona Pasqua
Veneto e la patria della meccanica
@@diosdios3307 si, l'Emilia è patria dei motori
Wonderful to see the Master at work! Thanks Maurizio Guidi !!
Thank you very much Gyro
I would give to this video more than one like! Amazing tool!
Thanks so much Mangashare, it works great
Sicuramente proverò a realizzarlo.
Complimenti come al solito e grazie per condividere e per la gentilezza nel dedicare del tempo a rispondere a tutti i commenti. Bravo !!
Grazie Roberto, certo che riuscirai
I started watching to see your clever implementation of the burnishing roller and saw your magnificent implementation of a milling attachment for the lathe, something which I have been contemplating for quite some time - WOW - grazie mille
Thanks so much Sharkbaitsurfer , come on and start building it
Una precisione MAESTOSA. Davvero sopra le righe, un maestro!
Grazie ancora Dario, ma nessun maestro
Grazie di esistere. Sei un grande , seguirti e uno spettacolo.
Grazie mille Andrea, beh...esisto volentieri!!
I really like this tool. I recently made a burnishing tool then I found this video. I think the design you have is the best I've seen. I am planning to make a roller burnisher based on your design. Bravo ! a great video and tool.
Cheers SteveO
Thanks so much Outback, it works great
buongiorno Maurizio, sono un progettista meccanico e guardo spesso i tuoi lavori. Sei un esempio d'abilità, di tecnica artigiana e di pulizia.
Grazie per le tue divulgazioni.
Grazie mille Mario, cerco solo di fare del mio meglio
Eccezionali!❤in risposta ai fannulloni che si lamentano di continuo!!.....bravissimo; questo si' che e' progresso e una lezione di vita ATTIVA !😅😅
@@GiovanniDeni Grazie Giovanni ma non penso di dare lezioni di vita a nessuno, ci mancherebbe!!
You are a real master of your craft, congratulations !
Thank you very much Arachnophob , but not master
Complimenti per i video! Bravissima la regia, meglio di quasi tutti video-lezioni profissionista! Eccelente idea, la proveró di fare quello della sfera. Cordiali saluti dal Brasile. Iscrito e like.
Grazie mille Marcelo, si si vedo che sei iscritto, grazie.
A parte esférica é mais simples, funciona melhor e é mais fácil de substituir, claro que tem limitações.
Saudações aos brasileiros
Felicidades Maurizio, un gran trabajo, lo guardo en proyectos a realizar. Gran calidad en tus mecanizados y proyectos. Tienes un canal que me encanta, por favor sigue mostrándonos estos maravillosos utensilios para torno y fresa. Un saludo
Muchas gracias Estami, muy amable, sí, esta herramienta sería útil para todos.
awesome tool and work quality!
Thank you very much C AR
Great video, and excellent technical level !!
Thank you very much Giovanni , very kind
Sempre video al TOP. Complimenti.
Grazie Carlo, gentilissimo come sempre
Sehr kompetent und sehr sympathisch !
Vielen Dank Traktor
Complimenti davvero Maurizio, Lei è davvero un metalmeccanico super professionale d'altri tempi....avercene di figure cosi nobili e con la passione di trasmettere l'istruzione tecnica.
Seguo con piacere i suoi video.
Buona Pasqua a Lei e Famiglia!!🎉
Grazie mille Marco, dammi del tu per cortesia, d'altri tempi si certo, super professionale direi di no, solo hobbista, Buona Pasqua a voi
That's impressive. Thanks for the tutorial.
Regards, Preso in Australia.
Thank you very much Mark
Greetings Australians!
complimenti per i suoi progetti,e' sempre un bene imparare cose nuove
grazie di cuore per il suo impegno
Grazie Andrea, gentilissimo
Mirror finish tooling, really Great Machine works,
The finish with the sphere is a great thought, I enjoyed the whole video.
I was tired enough playing yesterday with Colours, our festival of Colours Holi, being too tired I couldn't ignore the video saw half video yesterday night rest just now....
Grab Love from your Subscriber Suneel Kanda from India Uttar Pradesh Agra The City of Taj Mahal....
Thank you very much Suneel Kanda, yes this tool works very well but it is important to get a good finish before rolling.
Greetings India
Complimenti, ho visto qualche tuo lavoro, straordinario, sei un vero maestro, domani ti copio, grazie per condividere queste preziose conoscenze.
Grazie tante Cenzotat, Gentilissimo!
Salut Maurizio, quel niveau impressionnant ^^ Bravo à toi, toujours de la mécanique de précision et très pointue
Merci Lionel merci, toujours très gentil
Le faccio i miei complimenti. sono rimasto colpito dalla sua visione del lavoro ( in altre parole prima di realizzarlo il pezzo è già costruito nella mente fin nei suoi più piccoli dettagli). Ma anche tutto il resto davvero preciso e ben fatto
Grazie mille Michele, si cerco di tenere allenata la mente, ma non è detto che ci riesca!!
Well done my friend, I really like the first one with the ball barring, hope to see more of your fine work. 👍👍👍👍
Thank you very much Douglas , very kind
Una obra de arte !!!! Excelente
Muchas gracias rancisco , muy amable.
Muy muy muy ingenios, gracias por compartir tu trabajo con nosotros.
Muchas gracias Manuel, muy bueno.
MAESTRO Mauricio muy buena idea y mejor trabajo
salut josep
Muchas gracias josep, pero no maestro.
Bravissimo Maurizio... Bravissimo!!! Grande abraço do Barbosa.
Obrigado mais uma vez Barbosa, muito gentil
Parabéns. Ficou muito bom. Um grande abraço dos brasileiros😊
Muito obrigado Nilton, funciona muito bem.
saudações a todos os brasileiros
Sei sempre un passo più avanti, complimenti. Sei una fonte di ispirazione per progettare e lavorare con testa. Ora aspetto un brocciatore in linea con le tue creazioni. Ciao ciao Alberto
Grazie mille Alberto, gentilissimo ..... è una vita che le brocciature le faccio così, guarda al min 23:47 di questo video : czcams.com/video/9E2Sbra8t3I/video.html
Complimenti ottimo progetto e sopratutto ottimo suggerimento. Ciao bravo!
Grazie Ermanno grazie
Complimenti davvero!
Grazie mille Luigi
Perfect job!!!!!!
Thank you very much Ronald
Truly a skilled craftsman, respect sir.
Thank you very much Uthor
Привет. Отличная работа, в прочем как и всегда. Всё точно и красиво. Респект.👍
Будь здоров.
Спасибо большое Werschkow, я старался работать как мог
@@Mauri59g Вы говорите по русски или это перевод с Google? Как жаль что я не говорю по итальянский. Хотелось бы всё понять. А то читая субтитры, пропускаешь другое. Например хотелось бы повторить вашу фрезерную установку для токарного станка. Но к сожалению на неё даже нет видео, как вы её делали. Так что придётся мне делать что то наподобие вашей установки.
Да, у вас очень много хороших идей. Я обязательно что либо повторю. Например установка для нарезки резьбы, которая вставляется в сверлильный станок. 👍
Будьте здоровы и всего доброго.
You are a master.
Very impressive workmanship…
Thank you very much sm6fie
Excellent skill and presentation.
Thank you very much Multirole, very kind
Bravissimo come sempre Maurizio.
Grazie ancora Glauco
Maestro, Bravo!!!
mille grazie Антон
E' un piacere vedere i tuoi video . C'e solo da imparare grazie di esistere
Grazie mille Sandro, beh speriamo di "esistere" ancora a lungo
Trabalho maravilhoso! Parabéns.
Muito obrigado Klingonbr
Spettacolare come sempre 😊😊
Grazie mille Adriano
Magnífico trabajo. Lo felicito maestro.
Muchas gracias Napoleón pero no maestro.
@@Mauri59g no es mi intención incomodar, pero su conocimiento en este arte le da el calificativo. Saludos.
Più che perfette. Grazie
Grazie mille Temyra
I ordered all the parts for my burnishing tool as soon as I saw it on Tangent Jims channel. Still havent made it yet as I am busy upgrading my forging studio.
Forge On!!!
Make chips that dont need dips!
Thanks so much JmBStudio, let's get started
bellissimo video molto interessante e istruttivo. Bravo, bravo, bravo.
Grazie Adolfo, troppo gentile
Bravo et merci de partager votre savoir !
Merci beaucoup Lionel
Non ho parole, veramente eccezionale
Grazie mille Alessandro
Stupendo! Questo te lo copio!!!! 👍🏻
Grazie mille Zaro, sempre gentilissimo
best of the best‼️
Thank you very much Ture, but the best is yet to come
Ogni video mi stupisci sempre di più!!sei un maestro!auguri di buona Pasqua
Grazie mille Maurizio, Buona Pasqua a te
buon rollatore a tutti ^^ Really nice video thanks for that!
Thanks to you Audioventura who followed the video
Sensacional, saudações do Brasil
Muito obrigado Fazer, saudações aos brasileiros
Awesome burnishing tool.
Thank you very much Scott
Nice build and very, very Nice filming
Too bad i dont understand italian but its great to watch anyway
Best wishes from Holland
Thank you very much Bertje , but there are subtitles in English and Dutch.
Greetings to all of Holland
Eccellente! 👍
Thank you very much Gábor
The vice for the cross slide is very interesting. So too are the rolling tools.
Thank you very much John , I am very satisfied with the vice, it is this one: czcams.com/video/NUaTg54ElUI/video.html
bravo super je vais fabriquer celui avec la boule c'est plus facile bonne journée Daniel
Merci beaucoup Daniel, oui la sphère est simple
Parabéns nobre professor.
Muito obrigado Antonio, mas não professor
Este hombre es una máquina
Muchas gracias Alejandro, pero soy un hombre seguro.
muito bom vc é um gênio
Muito obrigado Braulino , tenho boas ideias, mas não tenho gênio
Trés interessant👌Merci
Merci beaucoup MB
che dire sei un artista bravo
Grazie molte Dany
Many years ago before the advent of CNC machine tools, Capstan and Turret Lathes used to use something called a Roller Box. It was a similar idea except that it used 2 hardened steel rollers and a turning tool. The rollers formed two points of a triangle in the form of a 3 point steady with the point of the turning tool being the third point. The surface finish was always better than a simple turned surface plus it relieved most of the side pressure on the Lathe Spindle bearings and so it was also suitable for turning small diameters that would otherwise flex.
Thank you very much mr Myorky, yes with that you could also machine thin and long bars, the turned ridges were crushed but it was still not a mirror surface
Bravo majstore!
Hvala vam puno Zvonko
Grazie!!!
prego
Bellissimo sempre complimenti 😊💯
grazie tante luigi
you make awesome work 😁👌👍
Thank you very much String
Very well designed
Thank you very much Daniel
Boa noite sou fã de seus videos
Muito obrigado Douglas, muito gentil!
Hallo Maurizio, sehr gute Arbeit. Schöne Grüße aus Lübeck ( Hamburg) Horst
Vielen Dank Horst , beste Grüße Hamburg
Perfect 👏👏👏
Thank you very much Kubilay
i like this guy
Thank you very much Robs
Hola Mauricio, como siempre ideas geniales y trabajos extraordinarios. Como se comportaría esta herramienta en el aluminio. ¿Lo has probado? Un saludo
Muchas gracias Jose Luis, claro que puedes usarlo, sale como si estuviera cromado.
Saludos para ti
Grandeeeeee👏👏👏👏👏
Thanks so much Alfred
Sempre grande classe e competenza. Mi aspetto a breve un upgrade di un serbatoietto per la lubrificazione sia del rullino che della sfera.
Grazie Mephysto grazie, beh io non devo fare lavorazioni in serie
Complimenti bene
Aceste operati pe strung sunt o adevărată plăcere bay
excelente
Muito obrigado Antonio
I was blown away by the finish this great little tool produced. I'm going to have to copy that I think for my little home shop ( which is about 1/3 rd of the size of yours !) I hope you don't mind if I copy the idea Maurizio? Greetings from the UK
Thank you very much Samrodian, of course you have to copy, I'm happy about it.
the size of the laboratory is secondary to the creativity.
Greetings to the United Kingdom
Hermosa Linda ❤❤❤❤
Muchas gracias Hot Facts
Hola Maurizio ,que gran idea ,un trabajo perfecto y así es la única manera de llegar hasta los topes o esquinas , como menciona también los e visto ,,hay de distintas formas ,pero nunca termina hasta las aristas o topes ni aún dónde el escalón no sea alto ,,,muchas veces pensé fabricar algo similar al moleteador ,con rodillos endurecidos,y rectificados ,formando un conjunto rodillo y eje en una sola pieza y dos rulemanes por detrás del rodillo así permite llegar hasta las aristasporque el rodillo es plano frontalmente ,,con,soló invertirlo trabajaríamos a derecha e izquierda ,,lado del mandril o contrapunta, ,haciendo las cajas de los rulemanes de una sola pieza y pivotantes igual a los moleteadores ,,eso si la fuerza de empuje no estaría al centro de los rodillos, salvo un diseño más refinado de lo que pensaba hacer ,en estas cosas ,o lo sabes de antemano ,o lo haces y ves el resultado ,,para mí caso al menos es así ,,,,,,grasias por contestar,mis comentarios y por sus amables palabras ,,si sería muy bueno compartir algunas cosas ,pero no creo sea algo sobresaliente lo que pueda,mostrar ,pero si algún día no molesta y tiene una dirección de correo ,electrónico le envío unas fotos ,que es por el momento lo que puedo, y se hacer,, con muchísimo gusto se las enviaré ,un saludo Maurizio ,buena jornada ,
Muchas gracias Juan Carlos, muy amable.
En el pasado ya había intentado sustituir las ruedas de la moleta basculante por 2 cojinetes convenientemente biselados en los bordes de apoyo, el resultado fue decepcionante... sólo aplastamiento del metal de forma desordenada, tal vez debido a que el rodamiento es demasiado fluido, parece que para funcionar bien se necesitan 2 componentes, 1) la presión adecuada 2) un esfuerzo de fricción y no de rodadura libre.
la base de soporte de bolas o rodillos crea esa fricción que parece gustarte.
No es fácil de explicar, espero que lo entiendas.
no tengo un correo publico
stupendo
Grazie Ancora Tosisilver
Very nice finish!!
How much material displacement is there to compensate for if your preparing a bearing race section?
I'm assuming you would loose a bit of material during the compression stage.
Thank you very much, it depends on many factors but largely on the degree of finishing roughness of the preparation turning.
1) To have precise parameters, I always use the same insert with a large radius that leaves few crests.
2) I always use 1 tenth of lap pressure, but this pressure depends on the stiffness of the lathe.
3) When polished soft metal I consider + 1.5 cents.
4) For medium hard metals (C40 - C 45) I consider + 1 cent
These considerations apply to my machine/tool complex. and they might be different using my roller on another machine.
B R A V O O O O O!!!! OTTIMO :)
Grazie tante Mark
che dire GRANDE!!!!!! non ci sono paragoni al tuo rullatore ciao
Grazie Massimo, troppo gentile
Beautiful tool and result.
What is the change in size and hardness of say 4140?
Thank you very much Carl , it depends on the steel hardness, but above all on the preparation finishing / turning.
if the turning is good, with medium HRC 40 steel a scaling from 0.6 to 1 cent.
Excellent
Thank you very much Hossein
👍👍💪💪non ci sono parole
Grazie Fabio, sempre gentile
Bravissimo come al solito un ottimo lavoro .Ho un po' di dubbi sulla durata della sede della sfera, anche se il maggiore sforzo va sul cuscinetto ,un po' di sforzo quando vai verso il mandrino lo riceve il porta utensile e ti potrebbe fare consumare l'acciaio che non è temprato.
Grazie mille Arigliano, si il porta utensile non è temprato volutamente per non rigare la sfera, non è nemmeno acciaio adatto alla tempra, ma la sfera è talmente liscia che ci vorranno un pò di anni per sboccolare la sede, tanto più che la sfera dove si appoggia crea una nuova sede e sempre lì rimane con l'avanzamento. ad ogni modo un commento interessante.
Che bellezza!
Grazie mille Francesco, ti giro il commento.... come lascia bello!
complimenti dei video e delle idee....😊.
volevo chiederti per il lato con il rullo HSS hai usato il bronzo?
grazie
Grazie tante Johnny
Si una barra di bronzo da 31 mm e il rullo in HSS, fai molta attenzione alla piccola curvatura di smusso, è lei che forma la deformazione
Ottima realizzazione, con grande risultato finale!! Hai idea di come realizzarne uno per rullare internamente delle sedi di un carter dove vanno inseriti dei cuscinetti?
Grazie mille Marco, se passa come diametro potrebbe già funzionare questo rullino sistemato in testa invece che di lato, che ne valga la pena non saprei
CALIDAD DE TRABAJO SALUDOS DESDE EL SALVADOR
Muchas gracias Rudy
Saludos a El Salvador
capisco grazie mille ottimi video...,?
Si, devi considerare che il rullo non è adiacente al pezzo, ma lavora solo sulla stondatura dello spigolo emulando il lavoro che compirebbe la sfera, ma che questa ha il limite dell'ingombro.
Grande !! purtroppo mi rendo conto che non sono in grado di realizzare questi tuoi progetti e immagino che non è neanche possibile ordinarli. Comunque complimenti !!
Grazie mille E G, con un pò di impegno è fattibile sopratutto il lato sfera che poi è quello più usato
Percebi que você tem vários dispositivos pra ser usados no torno mecânico,vc fábrica pra venda esse dispositivos?
Muito obrigado mas não estou vendendo nada, desculpe.
Veramente fatto bene!
Grazie mille Conrad
@@Mauri59g Avete un email?
@@Grappa96 no purtroppo non ho mail pubblica, mi dispiace
@@Mauri59g capisco!
nice
Thank you very much Jack
Bravo questi aggeggi sono molto utili in tornitura , lo devo provare su dischi in ghisa o volani dopo la rettifica vengono un minimo ruvidi , hanno un grip troppo alto appena mondati , ma la rettificatrice gira a48 giri muto , pensi funzioni? ,
Grazie mille Giuseppe, i "normali" dischi freno per automotive generalmente sono in ghisa grigia e appena un pò su di livello in ghisa sferoidale con aggiunta di componenti mirati, ma comunque ghisa che poco o nulla si presta a deformazione plastica e in più essendo altamente abrasiva danneggerebbe questo utensile in breve tempo
Interesting. Thanks. I see someone else makes use of old beer cans like me.
Thank you very much Greg , yes cans but without beer, empty, and they work wonderfully
Hi Maurizio, love the things you are doing, I'll be looking at building one of these in the future. I'm certainly glad you put the English translation on as a subtitle, my Italian is not so good, despite visiting on numerous occasions for holidays and work. I’m a little confused by your use of the word “doily” though. A doily is a cloth or paper napkin that you might put cakes on, on a tray when you have afternoon tea. Have a look at the English version of Wikipedia. If you could clarify I’d really appreciate it. Cheers, Bill.
Thank you very much Bill, very kind, Italian is full of words with many meanings, an accent is enough to change everything.
I'll give you an Italian site that sells a doily:
www.betafer.it/it/punte-da-ferro-maschi-e-filiere-beta/4220116-centrino-tornio-trapano-beta-422.html
@@Mauri59g Thanks Maurizio, that is what we would call a centre drill. The short stubby drills used to make a centre point would be spotting drills or stub drills.