First Try Sublimating Tumblers and Mugs With A Vevor 30 OZ Tumbler Heat Press
Vložit
- čas přidán 28. 08. 2024
- Well finally got around to trying to sublimate skinny mugs. Found Vevor had a press that would handle all the sizes I plan on doing and got them to send me one for the video. Well it worked great and here are the first couple jobs done with it. I made some simple errors and hopefully all the following ones will be perfect if I trim the artworks better. I can't believe how easy this sublimation is to do with the right equipment.
Here is an affiliate link to the press and a 5% off coupon code to use at checkout for more savings. Buying from Vevor means free shipping without a membership needed.
Here is the link to the item for a complete description of the capabilities s.vevor.com/bf.... Use this then apply the discount code at checkout.
Here is a sitewide code for 5% off anything to apply at checkout.
VVPROMO to get 5% OFF Sitewide in Vevor
Vevor also has a 30% off campaign on kitchen items. This is for may only. Here is a link
www.vevor.com/...
Here are some Amazon links to the blanks I used.
20 oz tumblers amzn.to/3B1hfZA
11 oz mug blanks amzn.to/41desay
Blue Tape that didn't leave ghosting amzn.to/41d1ycr
Business card blanks I use amzn.to/3nAV4qh
Mouse pads I use amzn.to/3B2XhxH
Sublimation paper I use amzn.to/42uUdpQ
Aluminum Sheets I use amzn.to/42edKuO
These are affiliate links that help support my channel if a purchase is made using them.
I just got my Vevor Tumbler Press. I have ordered my tumblers and is very excited about getting started. Yours looks great. I am very happy with my purchase. I also purchased the sublimation printer. Thank you for this share.......love it.
Hope you have as much fun with yours as I have been having. Awesome personal gifts that everyone loves and the tumblers really make ice last. Have fun. Thanks for watching.
what sublimation printer did you bought?
Beautiful and your blacks came out perfect! Dark colors can be hard to achieve especially blacks and reds.
For that dark line, I've seen folks add heat resistant tape on the backside edge of the paper that touches the tumbler. They wrap the paper around and the tape that was put on the other side prevents the color from bleeding through to the paper now on the bottom therefore eliminating that dark line.
Your wife's work is beautiful! My daughter knits and crochet and has done stuff items too.
Thanks. I did a couple more and can't believe how nice they come out. thats a great idea because I seem to always have overlap. So far this press has done an awesome job. Thanks for watching.
Those tumblers are awesome! Love to watch you "tinker." I do the same thing - tinkering - I have a laser engraver and a 3D printer and a vinyl cutter....
You seem to be missing the sublimination gear 😉. It's amazing how things like this can be made at home. This one caught my grandsons interest and he has some good ideas to make a little extra income. Hopefully Ii can get him started to make gas money now that he is driving. Thanks for watching.
Thanks for sharing this helpful information
They make great gifts everyone loves. Thanks for watching.
Your tumbler is BEAUTIFUL!!!
Thanks. I have done several more and they all are fantastic. So far the mug press is working great. Thanks for watching.
Absolutely beautiful
Thanks. Just amazing how they come out.
Hi 👋, I hope you are all keeping safe and well, That looks amazing, I see that there is a different one, little more expensive , and as a lot better controls , great territorial , keep up the great reviews, I look 👀 forward to seeing your next project.
PHIL FROM THE DARK SIDE OF THE MOULIN FRANCE.
Yes there are others available at twice the price that will handle up to the 30 oz mugs. This one seems to be the best value for what it can handle and worked great for me. Thanks for watching.
@@unemployedredneckhillbilly2023 , good luck with your project, you just give so much inspiration to everyone, .
Stay safe, keep up the great work, PHIL FROM DARK SIDE OF THE MOULIN FRANCE.
This video was awesome and very helpful! I just order one of these tonight was verry happy to come across your channel! Just Subscribed to your Chanel your mugs and tumblers came out Bbeautiful thank you for Sharing! 😊
It did a beautiful job on the tumblers. I am amazed by how easy it is to make professional looking items with sublimation just using a low cost converted printer. Have fun with yours. Thanks for watching.
@@unemployedredneckhillbilly2023 You are very welcome!Thank you very much.😊
Man that is really cool.... Keep it up brother
It's a great way to make awesome custom gifts. Really comes out nice with a proper press. Thanks for watching.
❤ I'm sold ❤
So far everyone has come out close to perfect. Still works great. Thanks for watching.
Love this. Thank you. I’ve subscribed and will check your other videos for some help. I’ve also converted an eco tank and have this exact press. I am not having much luck yet but have only tried a couple of mugs. Will try again using your settings 🤞
I have best results with the tall tumblers. My printer seems to be plugged up now from not using for a couple weeks so be sure to print something every couple days so it keeps working. Thanks for watching
Oh very cool! Thank you
They are fun to make. This press works great. Thanks for watching.
Stunning!!! 😍😍😍
I was amazed how nice they came out and there has been no fading of the colors after many washings now. Thanks for watching.
Amazing video
Still works good. Easy to make really beautiful gifts that stand up to daily use. Thanks for watching.
Wonderful.
It does a good job. Thanks for watching.
good stuff bud. New sub. Ordering mine today based on your video. Thanks very much.
I just did a couple tumblers for Xmas presents yesterday and they came out beautiful. The originals done in this video have seen a beating and still look great so it stands up great. Don't forget the 5% off coupon if you order the Vevor press. Have fun. Thanks for watching.
that mammoth is adorable
It was a special request by our grandson. He loved it. Thanks for watching.
great job bro!!!
Amazing how beautiful a job the sublimination does. Thanks for watching.
Ich habe mir auch die Vevor Presse zugelegt. Danke für das sehr gute Video🙏🥰
Mine still works great. Vevor makes nice affordable products. Thanks for watching.
were can i buy heat pads for this press?
they say (I'm sorry we don't sell pieces separately)
If it is under a year old they should replace the unit under warranty. If older, things like that can often be found on ebay. Thanks for watching.
Where did you get the tape dispenser???? Thank you for this video.
It was from Amazon. They doubled the price I paid so I didn't think it was a good buy anymore with how the spools needed tape wrapped around them to keep the tape from falling off so I didn’t put a link. Thanks for watching.
What printer do you use
I converted an Epson econo tank in another video. Works great once you figure out how to calibrate the colors. Thanks for watching.
I got this as a gift and have despised it I have used a mug press and convection oven and always had good results I tried this and have had bad results on every cup there manual is awful it says 360 f for directions so I ruined many items due to that and have got assistance on time temp and better results but they have bad customer service as well and not to mention the pad swells when heated in 2 spots and smokes I just got end of April it’s been a nightmare hoped this video would help but I’m doing what u did and half the cup will barely have color or burns
Boy that stinks. Mine works really good. My A sub paper said to use 400 degrees and it came out perfect with the machine set at 400 but the band was 20 degrees cooler then the setting at 380 when pressed. No smell at all. Check the band temperature and pressure you're using. Have the buyer send customer service pictures of what was happening? They should replace the heater band. Have the purchaser see if they can get help with the original order number . I cant help you seing it wasn't an order number through my links but will let them know about the problem. I'll watch for feedback from others because I just did the last 5 tumblers and they also came out perfect. At 5 bucks a pop that would be very frustrating. Thanks for watching.
How do u get the timer to countdown I set it and temp but anything I push or turn it won’t countdown I’m having to set a alexa timer
one quick push takes it to the time set screen and a second push starts the count down.
I have this same press and I love mine!
Finally have the right settings and it’s working ok but it does smoke when using it and has a large bubble in the press which has been like that since I got it
i there a difference in the pink and orange one you show here thanks
I have no idea. Probably made by a different vendor. Vevor just buys and resells items from other manufacturers and the only way to know if they're the same is to compare them side by side. Thanks for watching.
❤❤ good
Thanks for watching.
For a 15oz mug..what temp would you use? And 3 to 4m? Thank you! Just got mine!
I haven't tried big mugs like that. I use 400 and go by the time the paper specs for mugs. You probably will have to turn it halfway if the artwork is full coverage. You could also check with the mug manufacturer and see what they recommend. 2min and turn then 2 more may be a good starting point. Different manufacturers mugs don't always take the same settings I have found. Thanks for watching.
What's the temperature for the mugs? And did you get any coloring correctly on the edge? How many turns to get to the medium pressure on 15 oz mugs?
I used the 400 degrees recommended by the paper. Can't turn mugs much with the handles and must be sure the artwork is back some from the handle. I have only used 11 oz mugs so not sure what a bigger one would require because the heating element would be short and require turning without burning the center. Thanks for watching.
Great video. What temperature did you do the mug?
Set at 400 degrees f. Measured temp was actually 20 degrees less at 380. Thanks for watching.
How much seconds
Very nice! What kind of printer do you have?
I am using an Epsom ecotank that I converted in another video. Just bought a bunch more of the skinny tumblers I used that are on sale for Prime days because they make great gifts that everyone loves. The heatpress still works great. Thanks for watching.
Thank you for sharing ☺
Thanks for watching.
Got mine today
I just bought one but having trouble getting true colors, comes out faded and light.
Not sure what ink or printer you are using but use the color calibration file they supply for printing. I am using the settings on the paper box that I use and set it a couple degrees higher because that's where the temp was when I checked it with the thermometer as I showed. Check the temp of yours and adjust if it is a little low. Maybe try a little longer time . Mine have all come out beautiful so far with the A sub paper, Epson conversion, and the blanks I have been buying off Amazon. Thanks for watching
Mine were doing the same I put my temp to 400 and do tumblers for 60 seconds and mugs for 4 minutes and now colors are good
What is the measuring or the size to put it in the computer for a good two a coffee cup? Or consume one help me how to set up the computer to the coffee cup mugs.
I just measured my cup to get that. Doesn't really matter just make it the size you want. You can cut a piece of paper and wrap around to check its what you want.
Did you use the same temp. on all sub. blanks but just change the time?
Yes I did. Thanks for watching
What size do we use for the coffee cup
I used 11 oz cups and just size the artwork to fit. Measure your cup to get the exact size. Thanks for watching.
What temperature and how long do you heat press a mug?
I use the temperatures and times that come with the sub paper. Usually a minute each side but the paper recommends a range to start with. I use the IR gun to check because the controller numbers are a little high. For some reason tumblers from different manufacturers need different times so do a sample and record it for the future. Once you get the settings right they come out beautiful. Thanks for watching.
If you don't rotate does it leave a gap ?
About a quarter of it will have nothing and the tumbler becomes garbage. Thanks for watching.
Is it us plug?
Mine is. I think it depends on where you order it from. Check with Vevor. Thanks for watching.
muy mal hecho..
It works good. Thanks for watching.