How To Pump A Presta Valve
Vložit
- čas přidán 19. 06. 2024
- When it comes to cycle maintenance, one of the maintenance tasks that is most likely to arise is pumping up a bicycle tyre. This is down to the fact that regardless of how well you take care of your bike, with time and use, the pressure in your tyre goes down. This means at some point you will need to pump the tyres up. In this video we take a look at how to pump up a Presta valve.
Some tyres can be more difficult to pump than others, the Presta valve is commonly known for being a bit of a nuisance. Hopefully after watching our video you will know how to pump up a Presta valve minus the stress.
Thanks for watching. You can also read our guide on how to pump up a Presta valve which covers setting up your pump for a Presta valve and the steps involved in pumping your tyre up.
If you like what you see, head over to our blog to find out more about cycle maintenance:
www.cyclemaintenanceacademy.c...
You might be interested in our online bike maintenance courses for beginners: courses.cyclemaintenanceacade... - Sport
That's awesome! Several years ago I bought an inner tube and didn't realize it had a presta valve. I didn't even know how to pump it with air! I hated it. I just bought a used carbon gravel bike and it had a presta valve. I had to buy presta-to-schrader adapter and pumped up the tires. I really didn't have to buy that adapter because I didn't know two of my pumps had this feature where you reverse the rubber and fitting like you demonstrated in the video. THIS IS A LIFESAVER!!! THANK YOU!
Hey, this sounds very frustrating🤦.
We're really pleased that you found our video useful and that you can enjoy your new gravel bike🙂
I done the same
Common mistake. Hope our video clarified it for you...
Same thing with me. Was going to buy a new pump because my new bike has presta valves. All of my old bikes had schrader valves. I pulled out my super old park tools pump and discovered it could be converted like in the video. Good stuff.
Me four 🤣
I've had an irrational avoidance to presta but just got some holy rollers and the 2.5 tubes only came with presta. I have a little drawer full of adapters and connextors but none of them worked. Turns out I also have two pumps with this feature, a min i and a large so am so thankful to find this video, learn something, get over my phobia (actually a pretty good system once you use it), and save some bucks spending in stuff I really don't need. A guage would be nice, now I can afford one. Happy days, thanks again 😉👍
The fact that I have to watch a video about it means I'm not a fan of it.
Hi, thanks for your comment an opinion.🙂
I have them and hate them. Making something fancy that nobody asked for.
@@mrslap1924I'm sure it's a trickle down from road racing, but it makes it aggravating when all I'm trying to do is put air in the tires.
Exactly! Good point.
Underrated comment.
Dear CZcams Premium, after struggling for hours to pump my bike I’ve seen this video and then could use my bike in a second so it’s the first time i see a useful video on CZcams, please give this guy a lot of money like you do with useless influencers
Hey, thanks so much for your fantastic comment! 🙏 I'm delighted to hear that you found the video helpful. I hope CZcams takes your request into consideration. 😊
With a bit more funding, I could invest in improved equipment like a camera, computer, and SEO software. If you have any more questions or need advice related to bikes, please don't hesitate to reach out. Happy cycling🚴
Spent more time than I’m willing to admit trying to figure out why my pump wasn’t working. I thought the tyres had green goo in them or that something was dead wrong with my bike, but it turned out I had to unscrew the miserable brass washers first to get the pump to work. Brilliant video, I can’t thank you enough.
Hi Sebastian. Knowing that our video helped you to solve your Presta valve problem is such a great reward for all the hard work we've put in making it🙂.
Same here, i switched from DH mountain to single speed road and I never had a presta valve before so I felt extremely silly until this video.
@@Babydoll.official no need to feel silly. It's not the most user friendly item. Unfortunately this design works really well to keep the high pressure air in the slick tyres. That's why it's still around. I'm glad that you found our video useful🙂
Me and my neighbor... felt so dumb for this exact reason.
HATE PRESTA VALVES. PIA!
As a professional cyclist for 20 years, I can provide a couple of suggestions. In addition to this video. 1. Rotate the wheel so the valve is directly centre on the ground. Inflate the tube closet to the ground as opposite to what is shown in the video. It stresses the cord less and as gravity is working in your favour it doesn’t encourage air to escape as quick. 2. Inflate slightly over your desired PSI limit, when you disconnect the valve it releases some air and a few psi over compensates for this.
Hey Peter, thanks a lot for taking the time to comment and sharing your pro cyclist wisdom with us and the other viewers. Your ideas about rotating the wheel so the valve is in the centre and inflating the tube that's closest to the ground totally make sense. And that tip about slightly overinflating the tyre to compensate for the air release when disconnecting the valve is clever too.
To be honest, though, in the context of our video, the overall difference these suggestions make might be negligible. But hey, I love hearing different perspectives, and I'm sure that these suggestions will be useful to some of our pro cyclist viewers. Thanks again for sharing your thoughts, and I hope you keep enjoying our content!🙂
Thanks Peter I was getting so frustrated and you actually saved me icl ty very much ❤️
This has just saved my day. I was nearly in tears being a complete cycling novice. I had my bike serviced and inner tube and valve replace. I didn’t even know these valves existed let alone how to use them. Thank you!
Hi Keren, thanks for your comment🙏. That's frustrating. I'm so glad that you found the video helpful and that you can now deal with presta valves and maybe even help others who are not aware on how they work🙂.
I only found that Presta valves exist after I bought my bike and eventually had to top off the tires for the first time, so it was frustrating to find out that way and that, additionally, I would have to buy (and keep track of) an adapter. This tutorial is very helpful. Thanks for making a quality instructional video about a topic that many cyclists probably think is a very basic one.
Hey, thanks for the comment and sharing your experience with others. I'm glad that you found our video helpful🙂. If you ever need any more help related to bike maintenance you know where to find our CZcams channel
I just left my adapter screwed on
Invaluable... I don't like Presta valves, but I'm stuck with them for the meantime, and this has been REALLY useful.
Hi Anthony, thanks for your great comment🙏. I'm pleased that you found the video useful. Your negatve feelings about presta valves are shared by many other viewers. I hope that hanks to this video you will find them a bit less frustrating.
i just bought a bike and it had the presta valve and i bought a pump and watched like 3 other videos that didn’t help because i didn’t know that you had to switch the rubber piece inside but once i got that i was able to do it! Thank you!!
Hi, thanks for the comment.🙏 That's great to hear! I'm glad you found the video helpful.
I can understand how watching other videos without that crucial information might have been frustrating. But I'm glad our video provided the missing piece of the puzzle for you. Now that you've got it sorted out and know how to switch the rubber piece inside the pump, you'll be able to inflate your Presta valve without any issues.
Thanks once again for sharing your experience, and I'm glad we could assist you in getting it right. If you have any more questions or need further help, feel free to reach out. Enjoy your rides with properly inflated tyres, and happy cycling!🙂
This video is incredibly descriptive and slow enough that I didn't need to rewind or pause at anytime. Not that inflating the tire is difficult but there are a few steps like turning the internal adapter around. I ended up reading some article written by a third grade level thinker about how there's different valves but they didn't demonstrate how to actually inflate the presta valve. They actually made some really burnt out half a brain cell comment about how if you don't put the cap back on the Schrader valve that somehow your air is going to leak out after 300 yards. That's when I closed that browser and found your video which was a billion times better than that junk article
Hey, thanks so much for your comment. I'm pleased that, after this journey, you found our video and that it was helpful🙂. If you ever need any more bike-related help or want to hear from the leading trade experts then subscribe to our channel and check out our other videos. We post a new one each Friday🙂
Clear, concise and effective tutorial with no waffling.
Before this I didn't know you could switch the pump from shrader to presta, and didn't know about opening the valve on a presta and pressing it to loosen it. Now I know both.
Many thanks. Subscribed!
Hey, you're most welcome. I'm glad that the video was helpful.
Same! I thought it was an external adapter or whole different style pump. I never did like lance Armstrong bikes or 95% of the spandex wearing 5 wide bike pack rats that are common in nice areas.
Honestly the hardest part was taking the rubber out, which took about 30 seconds. Great video, thank you.
I'm glad you found the video helpful! Thanks for watching, and if you have any more questions, feel free to ask!🙂
Your well-edited visuals, paired with the concise and calm narrative, kept THIS nervous novice to bicycle maintenance from pitching, a fit…AND its brand-new mini-pump (which had been promoted as having a head whose internals needed NO reversal to accept either type). I had broken three small, fragile teeth at the very center, which must have been the “universal” feature. EVERYTHING you illustrated matched with what I discovered about my pump when I followed your directions. Your observations and tips regarding the Presta valve, and the attachment/detachment of the pump were very much relevant and appreciated. I will definitely be exploring more of your content. I have ridden for decades, but never had the confidence to work on my bikes myself. Realistically, I won’t be… I will be using your channel’s guidance, and you can be sure I will recommend your channel to so many friends that share my ignorance. THANK you.
Thank you for taking the time to write your feedback. We really appreciate it and being able to help is exactly why we are doing it. We feel motivated to continue. Thanks for watching 🙏
Awesome you saved me from buying another pump thinking I had gotten the wrong format or something. Real life savers and what youtube should be all about, people helping each other.
I'm so glad to hear that the video helped you out! It's great to know that I could save you from unnecessary hassle. If you have any more questions or need assistance in the future, don't hesitate to reach out.🙂
Thanks for the video, it's such an important and basic thing to be able to do. I had to figure out how to pump up my Presta valve tyres through trial and error and it was a bit frustrating. It's genuinely difficult if someone hasn't shown you how because everyone is used to Schrader valves from cars, motorbikes, and the kind of bicycles we ride when we're kids.
Hey, thanks for the comment🙏. Yes, Presta valves are not as straight forward to use as Schrader ones. I'm glad that you found our video useful and are now more confident in using Presta🙂
Finally I know what a presta valve is. I've always had a mtb with shrader valve. Just got a road bike and have been going through hell trying to pump
the tyres. I asked the guy at the bike shop how the pump woked and he looked at me as though I was an idiot! So many thanks for this well explained video.
Hi, thanks for your comment🙏. Shame that this happened to you. Everytime I share my knowledge with someone I feel happy and proud of myself that I can pass on something interesting. Glad that you found our video helpful🙂
Your video was easy to follow and works on a Presta valve with a standard pump no adaptor needed! Thanks for your video!!
Very helpful. My wife's back tire was repaired and they installed a Presta. Wasn't quite sure how they worked. Makes sense now. Thank you.
Hi Jason, thanks for your comment. They are a bit tricky if you not used them before. I am pleased that you found our video helpful and that your wife can enjoy riding again on a fully inflated tyres 🙂
Exactly what i was missing. Didn't know the rubber and inside needed to be switched around was about to go back to bike shop tomorrow glad i watched this!
Hi, thanks for the comment. I'm so glad you found what you were missing in the video and that you saved yourself a trip to the bike shop.
If you ever need more biking tips or have any other questions, feel free to reach out. Happy cycling! 🚲😊
YOU SIR HAVE SAVED MY LIFE. THANK YOU A MILLION TIMES OVER. FINALLY AFTER WASTING MONEY ON BIKE ADAPTERS THAT DIDN'T ACCOMPLISH NOTHING! YOU SIR ARE AMAZING!
Thanks🙏😊. So pleased that you found it useful.
After watching this video a learned how to use a presta valve although farely easy. I still like old school valve. Im a 90s kid
Hey Samuel, thanks for your comment. I am so pleased to read that you've learned something from our video🙂
I have to pump my bike today by myself for the first time .. thank you so much for this very detailed video ❤️❤️…
THANK YOU SO MUCH😭😭😭I’ve been having trouble pumping a presta valve for a while now. I used an adapter most of the time but I suddenly lost it, and this video was life saving. Thank you so much you deserve more subscribers
Thanks🙏. Glad the video was helpful👍. Maybe one day, thanks to comments like yours CZcams will show our videos to a wider public so we could get more subscribers and help them with their bike related problems.
Excellent work ! Without your video I would have continued to think that both of my air pumps were defective, and/or that the back innertube on my bike was bad. Then today, i couldn't take the slowly-flattening back tire any more, decided to switch in a new innertube, and lo and behold, neither of my 2 new innertubes would inflate either !!!!! That's when I found your video (you made today's ride the best ride I've had since buying this Sirrus a few months ago). Not only did I learn how to correctly assemble my hand-pump, but now I can use my electric pump properly too, and pass on to others what I've learned from you. Thank you !
Thank you so much for your feedback. We're motivated to do more now. 🙏
Thanks for making this video. I had bought a pump from Wally World that adapts to Presto valves, but never thought I would need to switch it out, so I threw away the packaging. I ended up getting a bike that has Presta valves, but wasn't sure how to switch up the pump. I figured it was easy, so now I feel silly for not trying to figure it out on my own. Yes, I'm a dork. 😝
Hey, no worries at all! We're all learning as we go, and it's great that you reached out for help. Glad the video was able to assist you in figuring out the pump situation. Feel free to reach out if you have any questions or need further advice.🙂
@@cyclemaintenanceacademy Right on.
Thanks 👍🏾🇺🇸😎🤘🏾
Great video. Didn’t realise my pump could work on Presta valve tyres until I watched this video. I was about to go to bike shop to buy a “Presta” pump!! Thank you. 👍
Hi John, thanks for the comment. I'm pleased that you found the video usefull and saved some cash🙂
I am not a fan of presta. But Iam a fan of this wonderfully instructive video
Hi, thanks for a nice comment🙏 and I'm pleased that you like the video🙂
Oh my god thank you for posting this, im on holiday in France right now and I could not get the flat tire on my rental bike to re-inflate, without this video it would have destroyed my plans for the day. Thank you so much!
You're very welcome! I'm pleased to hear that the video helped you out, especially while you're on holiday in France. Enjoy your bike ride and the rest of your vacation!🙂🚲
Thank you so much for this video. I had zero clue what a Presta valve was when I got my bicycle and found out (thought) that my hand pump would not work on it, but your insightful video showed me otherwise - I had no clue that my hand pump had multiple settings for different kinds of valves.
You're very welcome Chris! I'm happy to hear that the video helped clear up the confusion about Presta valves and how to use your hand pump with them.🙂 It's great that you discovered your hand pump's versatility. If you ever have more questions about bike maintenance or anything else related to cycling, feel free to ask. Happy cycling!🚴
❤ thanks! Just found this video after trying to use my foot pump and thinking I must be an idiot not to be able to work it!
I'm glad you found the video helpful! Don't worry, we all have those moments when we struggle with something simple. You're definitely not alone!🙂
Brother, you helped me so much, i bought new pump for 25usd and for a week i couldn’t able to ride it. Thanks you i just refunded pump and after few minutes i will ride my bike again😊❤
I'm really glad to hear that I could help you out! Enjoy getting back on your bike and have a fantastic ride! 😊🚲❤
I had previously been pushed to the point of despair trying to inflate the tyres. Your mentioning that the pump has to be reassembled really helped! Thank you and have an awesome day! :)
Hi, I'm so glad to hear that my mention about reassembling the pump was helpful for you! It can be really frustrating when tyre inflation becomes a struggle, but we've all been there!
Thanks for your kind words, and I hope you have an absolutely awesome day too! If you ever need more biking tips, I'm here to help. Happy cycling! 🚲😊
@@cyclemaintenanceacademy Ahhhhh! Thanks for the kind words and the PMA! Awesome! Great channel!😎
Wicked,, just bought a presta valve inner tube for my mountain bike, glad i checked this out before fitting it, luckily my bike pump has the fittings shown in this video,,,,
hey, that's awesome! I'm glad that you found the video helpful just in time for your new presta valve innertube. It's always a good idea to double-check, and it's even better when your pump is prepped and ready. Enjoy your ride with the new tube! 😊
A lifesaver video. Someone changed my pump without telling me. Your video gave me insight on how to change it back! Thanks :)
Hi Dwight, I'm pleased that our video was hepful to you🙂
This was extremely helpfu!
I'd never seen or heard of a Presta Valve. Your video saved me a trip to the bike shop.
Hi, and thanks for your great comment. I'm pleased to hear that my video was helpful to you! It's always great to save a trip to the bike shop and learn something new. If you have any more questions or if there's anything else you'd like assistance with, feel free to reach out. Happy cycling! 🚴♂️🔧
I wished I had seen this video first .Now I have to go back to the bike shop to pay another fee because I broke the valve😢😢😢😢.
I went to a hardware store thinking I needed adapters and even bought the wrong ones. Found this video and realized I didn't even need any of that to start with. Great video thank you so much
Hey, thanks for the comment🙏. I'm pleased that you found the video useful🙂. It's a pitty that you found it after you spent the money on the adapters.
Thank you so much bruuu! I had trouble pumping my Felt 100 road bick and the bicycle stores are freaking unsupportive. Watching this video I did the fix . Am good now riding. Thanks 🙏
Hey, thanks for your comment. Shame that you had some bad experience with the bike shops. Luckily you have us😉. I'm glad that the video was helpful.
This was very useful as i just bought a project bike with presta valves. I thought i would need a new pump but i just needed to change a few things on my pump. Thanks
They say necessity is the mother of invention, but in this case, it's the mother of saving money on a new pump! Glad you found a solution!🙂
Thank you for your tutorial. My first presto valve and I had no idea how to put air in the tires. Crazy frustrating but with your assistance I was able to do it.
That's great to hear. Hope you have less frustrating cycling times ahead now😁
Thank you for this video, I was about to go for a cycle and had to pump up my tires but someone had left the pump weird and it ended up deflating my entire tire! This was very helpful and to the point
You're very welcome! I'm delighted to hear that our video helped you out of that deflating situation.🙂 Happy cycling
Thank you, that was very helpful as my new bike has presta valves which I had no idea how to use! 👍😊
You're welcome! I'm glad the video was helpful in familiarising you with Presta valves. If you have any more questions or need assistance with anything else, don't hesitate to ask.😊
Same issue.
Thank you so much. I was given a new bike and didn't think I could go for a ride this sunny afternoon because of the stupid presta valve but my pump can do both valves. I did not know that. Thank you!
That's fantastic to hear! Enjoy your ride on this sunny afternoon. Glad the pump came through for you. If you ever need more biking tips, feel free to reach out.🙂
Thank you sir! We had never seeen a valve like this before, nor did we realize our pump was capable of working with it. Keep up the good work.
You're welcome! I'm glad the video helped you discover how to use the valve with your pump. If you have any more questions or need further assistance, feel free to ask. Keep enjoying your rides!🙂
i tried it and worked as easy as demonstrated.. thanks bro
You're most welcome. If you need more halp or have any bike related questions feel free to get in touch.
DUDE!!!! You're a life saver. This was the best tutorial i have watched.
Thanks, what a fantastic comment🤩. We're really chuffed that you found the answer to your problem in our video and we hope that thanks to the comments like yours CZcams will show our video to the wider audience so we can help more people.
This video is amazing! Literally save my bike and pump
Hi Oscar, thanks so much for your kind words! I'm glad my video helped you out and saved your bike and pump. Keep watching for more helpful tips and tricks!
I didn't know about Schrader and presta valve in pumps. Thanks!
You're welcome! I'm glad the information was helpful to you. If you have any more questions or need further clarification on anything, feel free to ask. 🙂
This video made it very easy for me to pump up my presta valve tube for my first time… thank you!
Hey Gary, thansk for your comment and I'm glad that our video was helpful🙂
Very helpful. I didnt realize my bike had presta valves until it needed air. Then i didnt know what to do. Glad I found this video!
Great! Glad it helped 😁
Thanks! Good tips. Didn't realize I should manually push in the brass stem before attaching the pump. That solved my problem.
You're welcome! I'm glad that our video helped you to solve the problem🙂
I'm 50 years young and I have NEVER seen this type of valve before...CRAZY! WEIRD. I'll take a shrader valve anyway. Thank you for the tutorial
At least when you do come across one, you'll handle it like a pro 😁
Life saver. Pissed me off when I was at a gas station trying to pump it since I figured my pump at home just wasn’t right. Didn’t know you can just flip the rubber
Hey, I'm glad that you found our little tip useful🙂. No more frustration at the petrol station!
Your video is great in spite of my frustration with the Presta valve. You make it very clear and understandable how to air the tire with the Presta valve.
Hi Alicia, thanks so much for your great comment. I'm glad the video helped you navigate the process. If you have any more questions or if there's anything else you'd like assistance with, feel free to let me know. 🙂
Best video ever, first time using presta, also showed pump valve adjustment,
Solid Gold.
Hi John, thanks for the comment🙏. I'm really pleased that you found the video helpful🙂
awesome video i was so confused how to add air to my bike with the presta valves thank you again
Just starting to get out on a bike for fun instead of using it to get to work and back got a new mountain bike that has these fitted thought would be the other type as seem stronger this video is really useful as never had this type before great video I've subscribed and looking forward to watching old and new videos from you stay safe
Hi there! Thank you for your comment. It's great to hear that you're enjoying leisure cycling again. Thank you for subscribing to our channel!🙏 I'm thrilled that you're looking forward to watching both our older and new videos.🙂 Stay safe out there and enjoy your biking adventures. If you have any more questions or need further assistance, feel free to reach out. Happy riding!
Quick, easy explanation of what to do. Brilliant video. Thank you
You're most welcome. I'm pleased that you found our video useful🙂
I found your vid while looking for specific presta valve pump( I thought there is). You saved me, thank you.
Hey, thanks for your comment. I'm glad that our video was helpful and that we could save you some cash🙂
Damn it!! I bought another pump thinking something was wrong with mine. Thank you so much! The bloody valve needs to loosen up a little to let the air in! Thank you!!!
I think that's how pump manufacturers keep going! I'm so pleased the video was useful.
A simple technique that I never was taught but always expected to know. I’ve been yelled at for asking to use someone’s pump and then trying to get it to work but they felt that was inappropriate. YT asked how I liked your video so I said it was life changing with five stars, I liked and subbed so hopefully more people will see your video over others. The first suggestion was sooo annoying and awful. I was thrilled to find your video second, but wish it was the first suggestion. Cheers💛
Hi Robert. I'm glad that you liked the video and that you found the answer to your problem👍. And massive Thank You for sharing your opinion with YT. The support we get from people like you means a lot to us🙏. Cheers🙂
I had to pump for my road bike the whole time and I didn’t know that all you had to do was disassemble the reverse the threads inside and then tighten the washer lol thank you for sharing your knowledge it’s awesome Content
Thank you so much for your feedback, it keeps us going. 🙏
I have a "Specialized" stand pump that works for either valve, with no changing anything. Just hook it up, and pump away. Highly recommend. 💯
Thank you! Just saved me a bunch of time fixing my bike on roadside. Cheers!
You're welcome. It always make me feel good to read that my videos saved someone's time or money. If you need any more help or have any bike related questions feel free to get in touch. Happy cycling ☺️
Nice site! You helped me out with a pump I was having a problem with! Thank you.
And I’m
Not really a fan of Presta valves but it is what it is…🤷🏻♂️👍🏻
Hey, thanks for the comment and I'm pleased that you like what we do🙂. Always good to hear that our video was helpful. I think you're in the majority regarding presta valves. The advntages and disadvantages between presta and schrader valves are debatable, however Schrader have one major advantage: it's easier to use. I think over the time we will see less and less of presta.
Nice video. With this information I can better manage my presta valve inner tubes and keep them fit for the road. Thanks
Hey Ryan, thanks for your comment. It's always super nice to see these kind of feedbacks. I'm glad you found our video useful.
Thank you so much! I didn't know I had to unscrew the little top screw before pumping. I was wondering why my new pump wasn't working.
You're most welcome! Those little details can make all the difference. If you struggle with anything else and you can't find the answer on our channel then feel free to reach out. Happy cycling🙂
Thank you, I learnt something useful
Hi Kevin, great to hear that. Hope you enjoy our other videos:)
I am 53 yrs of age Thank god for this Video :---)
Hi Richard, thanks for the comment and I'm glad you found the video helpful. If you need more advice or have bike related questions feel free to get in touch.🙂
Thank you for the tip about pressing the valve down to loosen it before putting the pump on. I thought my pump was broken, but that solved it.
Hi Barmy, great to hear that it wasn't your pump and that our video was helpful🙂🙏
Your video was really helpful, l had never come across this type of mechanism ! Thanks 😊
Hi, and thanks for your comment. I'm glad the video proved helpful! Presta valve can be unfamiliar to many, so I'm pleased I could assist you in understanding it. If you have any more questions or if there's a specific topic you'd like me to cover in future videos, feel free to let me know. 😊
I thought this wasn’t thing but I guess I’m wrong, I bought a new floor pump because I couldn’t figure it out but this video helped me out so much can’t thank you enough.
Hey, thanks for your comment and sharing your experience with others. I'm glad that you found this video useful🙂
Thank you! Other tutorials didn’t effectively show or explain with the clear detail and visuals that you provided.
Thank you for your feedback. We try and make it as clear as possible, so it's great to hear we achieved this. Let us know if there's anything else we can help you with 😁
Thank you so much. You made my weekend. 👏👏👏
You’re welcome 😊. I am really pleased that our video was helpful to you. Have a great weekend🙂
I am new to road cycling and this video just saved my wife travelling 40 miles and coming to get me haha! Thanks 🙏 🚴♂️
That's great to hear. 😂 Glad to save your wife the trip
this is a video that everyone should see at least one time in there lifetime.
Hi Paul, thanks so much for your kind words!🙏 I'm genuinely flattered by your comment.
I'm pleased to hear that you found the video helpful. If you have any questions or if there's anything else you'd like to see in future videos, feel free to let me know. Happy cycling!🙂
Thanks for taking the time and making this.
Hey, our pleasure. Glad the video was helpful🙂
Did NOT know about that brass screw bit. Thank you!
Hey Joe, you're most welcome.🙂 I'm pleased that you found the information about the brass nut helpful. If you need any other bike-related guidance or have any questions, please feel free to reach out.
👍👍👍 awesome explanation on the 2 types an i never knew that about the pump , also if you break the Presta valve it's not useless, 2 things you can do:
* use for repair patches
*cut in half an place inside your bike tyre as extra protection from punctures 👍
Thanks for sharing your tips👍 and thank you for your comment 😁
Thank you so much now I can bike to work tomorrow 😎
Hey Austin, we're so pleased that our video was helpful. Have a nice ride to work 🙂
You are my hero. The best video on the topic.
Wow, what a statement. Thanks🙏😊. Glad you found the video useful
Thank you I thought I had to buy a hole new pump but I just had to change mine this helped A lot
Hi, thansk for the comment. Good to hear that the video was helpful and that it saved you some cash🙂
❤🎉thank you so much, very useful, clear instructions, well articulated . I bought a 40 year old vintage british race bike and was struggling with it. Still a bit but atleast i now know i am not doing anything wrong!
Hi, thanks so much for the comment🙏. I'm pleased that you found the video helpful🙂. I'm also intrigued, what vintage bike did you get? Is this a restoration project or is the bike fully working and you already enjoy speeding on the tarmac?
@@cyclemaintenanceacademy it is a 1980s Raleigh Londoner with down tube shifters. Single owner from New! Most parts made in Britain or EU. Indeed a project but even as is, not a bad ride for its age. Nothing compares the charm of a classic. Besides it won't be the envy of the thieves!
That's great, it sounds like you've got a real gem. Enjoy riding it:)
Thank you so much for making this very informative video it's helped me a lot!
You're welcome Eric! I'm pleased to hear that the video was helpful for you. If you ever have more questions or need assistance with anything else, feel free to reach out.🙂
You're a godsend! Thanks sooo much for making this excellent video 😊
Hey Judith, you're most welcome! I'm pleased to hear that you found the video helpful.🙂 If you have any more questions about bike maintenance or anything else, feel free to ask. Happy cycling!
Once shown never forgotten! Live saver, thanks.
Hi Frederick, well said! Thanks for watching the video and we're pleased that you found it useful🙂
nicely explained video, exactly what I was looking for
Hi, and thanks for such a nice comment! I'm happy to hear that the video was helpful to you. If you have any more questions, feel free to reach out!🙂
thank you I needed this just in time.
Hi, and thanks for your comment. I'm glad this video could help you out when you needed it!🙂
Thank you! Finally managed to pump the tyre after completely deflating it 😅
You're most welcome! I'm glad the video was able to help you out, especially with the challenge of fully deflating the tyre. If you have any more questions or need assistance in the future, don't hesitate to reach out. Happy cycling!
This video is SUPER HELPFUL!!!!
Hi Derrick, thanks for such a nice comment. I'm thrilled to hear that the video was helpful for you! Pumping Presta valves can be a bit tricky at first, but once you get the hang of it, it becomes second nature. Happy riding and keep those tyres pumped up!
That’s exactly what I needed to know
I'm glad I could provide the information you were looking for! If you have any more questions or if there's anything else you'd like assistance with, feel free to ask. 😊
Thank you so much!! Very useful info! Helped me a lot
You're welcome🙂. It's good to hear that our video was helpful.
Excellent video.. really helpful and save me some money
Fantastic Jonathan, that's what we want to hear,👍🙂
Not a fan of the presta. My spare bike just has them fitted. glad I've not damaged the valves yet as I'd no idea how to inflate them,m just winged it. My pump has both S & P valve holes, so no pump adjustment needed. Your video put me straight, thanks.
Hey, thanks for the comment! I'm glad the video helped you out with inflating Presta valves. If you have any more questions or need tips, feel free to ask.🙂
This helped me so much. Easy steps. Formal and explained great.
Hi and thanks for such a great comment! I'm pleased to hear that the video was a big help to you! 😄 Thanks for the kind words and for appreciating the easy-to-follow steps and clear explanations.
If you ever need more biking tips or have any other questions, don't hesitate to reach out.
Happy cycling! 🚲😊
No valves were harmed in the making of this tutorial
I can confirm that not a single valve filed a complaint, and our legal team has verified that they are all in one piece. We've even provided them with a VIP pass to the Valve Spa for some well-deserved relaxation after the tutorial shoot. They're living their best valve lives!" 😄🚲
Oh, God, thank you so much and you have no idea how some of those details had alluded me and now it’s just so easy! :-)
Thank you for your feedback, it makes us happy to hear that the video helped. 😁
Thanks!!! Straight to the point!!!
Hi, and thanks for your kind comment! I'm glad you enjoyed the video. If you have any bike related questions or need assistance in the future, feel free to reach out.🙂
Excellent vid for this old dude. Let's ride again!
Thanks Doug🙂
Thanks a lot mate. You just helped me millions!
Hi, thanks for the comment.🙏. I'm pleased we could help🙂
No, I'm not a fan.
I wish I had seen your video first before I bent my valve😢.
This is by far "THE BEST VIDEO." All other videos mentioned to open the valve a little. It was mentioned not to open the valve ALL THE WAY!
Thank you! I'm not a fan of the Presta valve
I'll be taking my bike back to the repair shop to exchange for the original tube.
Hi, sorry to hear about your experience with Presta valves! It's frustrating when things don't go as planned. I'm glad my video was helpful to you, and I appreciate your feedback. If you have any more questions or need further assistance, feel free to reach out.🙂