Revell/USCP: Ford Shelby Mustang GT500 Custom Part 1 Bodywork & Paint
Vložit
- čas přidán 10. 02. 2021
- Thank you to Squarespace for sponsoring this video! Head to www.squarespace.com/scalemode... save 10% off your first purchase of a website or domain using code SCALEMODELING
GT500 Custom bodykit
uscp-ua.com/index.php?route=p...
Revell GT350H kit:
amzn.to/2NPeaXr
Streetblisters paint: www.ebay.es/usr/streetblister...
www.spotmodel.com/index.php?m...
www.ebay.nl/itm/254739014272
www.ebay.nl/itm/254739073779
www.ebay.nl/itm/254738973359
Tape:
amzn.to/2MEByXa
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
Sanding sponges: amzn.to/2xGMKtY
amzn.to/2xPVsq8
Respirator: amzn.to/2yn8rfA
Panelline scriber:
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Spray stand: amzn.to/2z9Y2D9
✖ Want to support the channel, become a channel member:
/ @thescalemodelingchannel
Links to the products i use are bellow
✖My Amazon shop for US viewers: www.amazon.com/shop/thescalem...
✖Want to support this channel, why not become a patron!
www.patreon.com/thescalemodel...
✖ Shopping links for a lot of the tools i use:
My Workbench:
www.hobbyzone.pl/
My airbrushes and setup:
1BAR(14PSI) of air pressure through the gun.
amzn.to/2xGv8JT
amzn.to/2xHccdW
I use a Eurotech 20A Aircompressor
A Spray booth i recommend:
amzn.to/2yp5T25
amzn.to/2J8l1n1
The booth i made myself:
• How To: Build a Spray ...
Zero paints store locator:
www.zero-paints.com/Dealer_Lis...
General Tools: amzn.to/2xGdDOB
Sanding sticks:
amzn.to/2JDydEt
amzn.to/2l1FWOV
Tape:
amzn.to/2xGHWQk
amzn.to/2yplZZE
amzn.to/2ypqUKa
amzn.to/2yp9IEH
Tape with plastic sheet: amzn.to/2hIy82f
Knife:
amzn.to/2xGMvz4
amzn.to/2ypq3sT
amzn.to/2yxGC6J
Tamiya Weathering Set: amzn.to/2Aj0n07
Cutter: amzn.to/2xHd6qQ
Cutting Mat: amzn.to/2znJ0dT
Clearparts glue: amzn.to/2EQMTyt
CA Glue: amzn.to/2zb0jhg
Plastic Cement: amzn.to/2za8KJX
Respirator: amzn.to/2yn8rfA
Gloves:amzn.to/2ypuTqd
Tweezer: amzn.to/2hIxj9F
Brushes: amzn.to/2xG77r3
Decals Solutions:
amzn.to/2ylIPzQ
amzn.to/2ypuRP7
Panelline scriber:
amzn.to/2hGDElS
amzn.to/2gXsrOl
amzn.to/2JmKDRH
amzn.to/2Lxp1if
amzn.to/2MbulJl
amzn.to/2Mb9cyI
amzn.to/2M6vu4V
Permanent markers: amzn.to/2zptYoa
amzn.to/2z8WREd amzn.to/2zFEgjS
Sanding sponges: amzn.to/2xGMKtY
amzn.to/2xPVsq8
Spray stand: amzn.to/2z9Y2D9
Parts holders: amzn.to/2ypbjtT
Panelline accent color: amzn.to/2xGB7OA
BMF: amzn.to/2EYoP8k
Proxxon Micromot 50E: amzn.to/2H4D7cw amzn.to/2HemhFE amzn.to/2uNDGlQ
Hand Drill/Pin vice: amzn.to/2IwW58I
Hole Punch:
amzn.to/2ELyvTk
amzn.to/2IQJMEf
amzn.to/2EOL944
amzn.to/2GYgbwa
Camera Gear:
GoPro: amzn.to/2DDfRgz
Head Strap: amzn.to/2DHiiio
Links
www.uscp-ua.com
In my videos I'm showing all sorts of tips and trick about model car building. I do tutorials( how to's ),model kit builds, unboxing reviews and all sorts of other scale model related stuff.
If you have any suggestions or questions at all just post a comment or email me at info@thescalemodelingchannel.com
Also don't forget to like us on Facebook & Instagram for project updates and news.
/ thescalemodelingchannel
/ thescalemodelingchannel
Music copyright ® by CZcams Audio Library
&
ampletunes.com/
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites - Jak na to + styl
Beautiful colours and the masking on those white lines is superb! 👏
I really like that blue, gorgeous painting on the body alone, must see more!
The color is so damn great, especially with the white stripes! Amazing work!
Love the paint work. Nice job.
Very nice. Love the colors and the Super Snake Style stripes!
Amazing work. Congrats on almost 200k subscribers.
Great color job and those lines are CRISP!!!!!!! It does look satisfying watching you pull the tape lines......
Perfect finish like always 👌👌👌👌👌
New subscriber getting back into the hobby now being retired I have plenty of time on my hands do to COVID. I’m looking forward to following your channel. Thanks again for sharing your info and knowledge. 👍 Artie
Nice Blue!!! Body looks Great!!! I'll be watching
Looking good!!!
Nice job you are doing on this man !!!!!
Great tips nicely done.
Awesome paint.
Nice color combination love it 😉
awesome dude!
Awesome color choice !!!!!!!!!!!!!!!!
Very nice!
AWESOMENESS !
WOW 😳 .
Very nice!👍👍
Excellent job with the stripes, I'd done the opposite, white primer then blue. Anyway the rendering is beautiful. Cheers.
great job
Estupenda primera parte de la construccion de este Ford Shelby Mustang GT500, muy buena la realizacion de la carrocería y pintura, mis respetos y saludos desde Venezuela.💯👍👊🤘
very nice thanks for the links cool dou love the vid scooter d
love it
Perfect
Nice job ....
How is your car paint so clean and smooth ? Any tips?
I LIKE THE STRIPES TOM
personally I love resin models
When I used zero paint over Tamiya primer, it destoryed it. Like if the paint was shrinking, making crazy wrinkles and revealing imperfections that were well covered by primer. Had to strip it and start again with a different primer...
Love your work. I am looking to buy a scriber but don't have a lot of money. Which scriber and tool would be the best for mostly cars and trucks? Thanks in advance.
The best is the tamiya engraving blade 0.2
Th best cheap solution is a Trumpeter scriber
Looks great Tom , how does the clear from streetblister compare to the clear from ZP that you used before ?
I like streetblisters better.
Great Videos!!! What do you mean when you say you have to apply thin layers for plastic models? What happens when the color bites into the plastic?
Thank you once again!
The thinners in laquer paints are quite aggressive and can bite in to and potentialy melt plasic. Resin and matel are much harder and the thinners can’t attact those materials as much
@@TheScalemodelingChannel great thank you for your response :)
lookin fantastic so far !!!! what kinda scrber is that. / make ? cant for the next 1👍😎👍
As shown in the video and linked in the description. Tamiya engraving blade and holder
Hi Tom, great video as usual! Interesting to see that the white primer worked well. I’ve had a good experience painting white stripes on a darker colour with Tamiya’s LP paint.
I’m curious as to how the Street Blisters clear compares to Zero 2K. Would you say that the SB paint is easier to use/achieves a better finish out of the gun in comparison?
Just as easy to use, i personaly like the way it cures better(smoother)
@@TheScalemodelingChannel Awesome, thanks for the info!
Absolutely beautiful!
Great job, I used the Tamiya tape but still get paint bleed in some area's. Not a whole lot, but small bleed area's..Any suggestions?
Make sure it is pressed down properly, and have no tention on it anywhere
@@TheScalemodelingChannel Thank you sir
How do you gauge what pressure to use for painting? I tend to use 20psi. Noticed in a few of your videos that the psi ranges change.
Different airbrush different settings. I just keep trying untill i find what feels good
can you show a side by side before and after comparison of the panel lines. i want to see how big a difference it makes.
In the video you can still see the panel line on the other headlight a little bit. Maybe that helps for now.
It does make a massive difference in my opinion
@@TheScalemodelingChannel I'm saying next time, like an up close photo. personally its hard to see a big difference so it would help.
Nice vid, love the colors and you showing howto :)
I Like It, have a Blessed Week.
Any plans on building a resin 2021 'Vette?
Did not know there was one?
Hi I've been using my H&S Silverline Evo 0.2mm for 2 days from now. I'm having a problem on it. It splatter paints whenever I pull the trigger to the max but when I pull it just in the middle it won't splatter. Do you know how to fix it? I find the paint dripping whenever I pull the needle.
Make sure the air is always pressed when spraying. And also when not spraying. Remove the crown. As that tends to build up paint.
Possible newbie question... If you're using the same acrylic ZeroPaints paint you've used on plastic kits, can you help me understand how heavier coats "bite" into plastic more than resin?
Zero paints are not acrylic. They are laquer.
The thinners in laquer paints are quite aggressive and can bite in to and potentialy melt plasic. Resin and matel are much harder and the thinners can’t attact those materials as much
@@TheScalemodelingChannel Understood -- thanks for clarifying!
How long did you wait between clear coat , and why did you change the clear coat?
An hour or so.
I got offered to test it. And like it. So i still use it
@@TheScalemodelingChannel thnx so much
$100 body kit,???well the $24 dollar amt kit im having problems getting the front end on but man im gonna do the strips idea,badass
you sure have more patience than me with those strips
I love that blue color. Reminds me of Tamiya Mica Blue and Telefonica Blue. Great job masking those stripes. I couldn't even do that if I had the patience. I'm just a sucker for decals lol
When ordering from the Ukrane to the USA does it require paying tarifs or anything else special? Thanks
Im not from the us, so no idea.
Quick question for you, Tom. Did I hear you right when you said you waited “a couple of minutes” before unmasking the stripes?? Every automotive show I’ve ever watched seems to unmask once the paint is dry - is there an advantage to unmasking whilst the paint is still wet?? Love the channel, mate - wish my models turned out even half as good as yours do!!! : )
the paint is touch dry in a couple minutes ;) thats the same way they do it on the shows
@@TheScalemodelingChannel thanks Tom, appreciate the info, mate. : )
Is streetblisters better than zero 2k Diamond?
Quite the same.
He said he prefers Streetblisters better than Zero.
already watched the whole video in the 7 seconds its been up
Sure wish it was easier to get zero paints in the US.
been a month and a half and still on backorder from new jersey.....
streetblister paint dont ship to usa....
Как с завода классика рулит
Hello
the video came out a minute ago, amazing
Well Tom.. You have the patience and the experience 😁👍
first
John wick car vs BMW m4 🙏🏻
hey duch I have seen a tool on BARBATOS REX channel to cure the paint he used a dehydrator
for fruits , And I got one too and it works! just check it out.