*Love the **Bestt.Digital** Label Printer! It was easy to set up and prints super fast which makes it so fun to use. I uproot to make Shipping labels but I’m having fun making sticker also!*
My machine actually didnt come with any instructions, so you just completely saved me from hours of hassle and potentially returning a really expensive machine😭😭😭 Thank you so much!!
I broke mine the same day I got it. Paper kept getting stuck during thermal transfer. Followed many instructions. Had a good photo. Decided to smash the machine into pieces then return it saying it came like that lol
Lol. Did you feed the paper straight? It sucks that you have to eyeball it. Otherwise the paper gets all jammed and messed up. Happened to me the first time. Now I'm always checking to make sure it's straight
I recently bought one of these machines to make thermal master units for my spirit duplicator. I can take a printout from my computer's ink jet printer, scan it with this machine and image it onto a thermal stencil paper, and then run it off on the spirit duplicator (a.k.a. "ditto machine") and make about 30-40 clear and very inexpensive copies in less than a minute.
I always make a line drawing of my tattoo and print it off then put it in the thermal copier. But make sure the lines aren’t too thin or some copiers won’t pick it up as well. Plus use good thermal paper some papers don’t show as good as others.
Nah my stecils come out spotty if I leave the yellow paper on, like if there's not enough pressure on the transfer paper itself if you leave the yellow paper on
So did you draw that picture freehand? I’m only going to do tiny tattoos like a word or small symbol because I’m a PMU artist only. Any advice where I could find some tiny symbols to print?
@@laurennuttall459even if the picture has tones like blacc and grey does it do an outline of the picture or it can only use outlined pictures like how the video is doin
Thank you for you video. I got a question. Can you copy an image from the web print it on regular paper and place it in the transfer machine and will it copy it to the transfer paper and apply it to skin afterwards? I wanna get into tattooing. Just wondering what's the best route to take. Cause I can't draw. 😔
learn to draw and shade before you get anywhere near a tattoo machine. Just because technology exists that allows you to copy doesn't mean you should rely on other ppls work. Your work will be shit otherwise.. jus sayin
All of these replies are major L's drawing and injecting ink with a needle are two separate crafts. I cant draw. But i can fkn tattoo. Hes right about the tracing. And to answer bros question cus not one of yall did YES. You can print on regular paper!
Can you please make a video about the settings. I.e. when you hold the stop button for 3 seconds. I got this stencil that I can't figure out what settings to use. It just colors in everything black. The image has solid lines with light gray but the gray is being printed in flat black
I'm a little confused. How does the printer work? As in, what makes the image transfer to the purple sheet? Could I draw an image onto printer paper using a biro pen/pencil and it'll work? Or does it have to be printed out? I really don't understand
Hey buddy this is probably a dumb question what’s the difference between the two deepnesses? Which one does it work better on? Also what thermal paper do you think works best in it because in some of the reviews I read about it before I bought it said some brands of thermal work for crap in it
You need to use stencil stuff, you can buy it on amazon, you spread it over the skin, let it dry a little bit adn the you place your desing over it, place it like 3 or 5 minutes and take it off. You can use deodorant instead of stencil stuff, some people say it is nice, i havent used it tho
@@Exportlungs but NOT antiperspirant, has to be the green/blue bar style deodorant. Like Speed Stick or old school Old Spice. I always wondered why tattoo shops always smelled that way.
Are you able to do a video on how to not waste the thermal paper like of you're doing smaller tattoos, I feel like I have a lot of scrap and not sure of I can reuse it
Hey mate nice vid , I have the exact same machine and it worked ok about 10 times, now it just prints really weak stencils with lines all across it , have u had any trouble like that ?
I have the same problem but straight from the beginning, it also happens that the blue paper sometimes sticks to the machine ruining the stencil. Is the second machine I had returned to amazon.
Hi Adam, I got one of these and worked as shit. Changed for another one (amazon) and is a little bit better, but far from ok. And I'm doing everything exactly as you. Do you have any advise (special paper, any specific seller,...)? Have you tried more than one or you hit the jackpot at first? Thanks in advance for your help!
Did you try a simple stencil? My simple one came out fine. It's the ones that have gray that a hard. I did notice the paper needs to be flat. The paper that came with the printer was all rolled up
how do you like this machine? I'm guessing you preprint the image on a regular piece of paper first. how is the quality of stencil and machine holding up, does the stencil wipe off easily?
So I've just received my transfer machine a few days ago and tried it for the first time today. My transfer machine leaves horrible lines through the whole page that completely ruin the design, I've tried numerous different types of paper and designs and it all turns out the same! Does anyone know the cause of this, and how to fix it??
I got mine today and followed every instruction to the tee, the copy images moves through but the thermal paper doesn't move an inch so it's unabke to even copy it onto the thermal. What do I do ? It's brand new the exact same as this one
Is this design just for tattoo stencils or is it just a typical thermal printer? I have been looking for one for a while but the ones made specifically for tattooing are expensive as hell
So is this just printing a picture onto normal paper with a normal computer printer then this machine transfers it to the tattoo transfer paper? I’m sick of tracing off my phone and the pen not transferring properly :(
So you need to print out a design with a regular printer first and then print it on the stencil? Because I just bought a thermal printer and I don’t have money to buy a whole other printer
If it’s this thermal one then yes. There are Bluetooth ones WiFi ones and usb ones that you don’t need a printer but if yours isn’t one of those then you’ll need a printer to thermal copy it
Can you help me a bit? I bought my printer and some paper, and when I apply the stencil on the skin (with the stencil stuff) even after 15 minutes of drying, the stencil dies when I pass the napkin (with the water+greensoap) :( Can it be some option on the printer? Do I have to use more stencil stuff? Halp T__T
i am watching this everytime i use the printer hah!
sameee haha
me too! idk why its soo hard for me to understand how to use this damn thing!!!!!!! urgh!
@@stephaniemadriz79 this one is golden, i switched to thermal imager and thats where real sruggle began 😅
😂😂 same here
🤣🤣🤣 I'm guessing I'll do the same till it's implanted in my head hahah
Watching 4 years later and still the simplest, best explanation i could find! Stencil came out perfect
*Love the **Bestt.Digital** Label Printer! It was easy to set up and prints super fast which makes it so fun to use. I uproot to make Shipping labels but I’m having fun making sticker also!*
My machine actually didnt come with any instructions, so you just completely saved me from hours of hassle and potentially returning a really expensive machine😭😭😭
Thank you so much!!
This was so helpful and my first stencil ever came out perfect! Thank you !!
Thank you for the straight to the point video.
I broke mine the same day I got it. Paper kept getting stuck during thermal transfer. Followed many instructions. Had a good photo. Decided to smash the machine into pieces then return it saying it came like that lol
🤣
Lol. Did you feed the paper straight? It sucks that you have to eyeball it. Otherwise the paper gets all jammed and messed up. Happened to me the first time. Now I'm always checking to make sure it's straight
Broke mine too
Lmao
I recently bought one of these machines to make thermal master units for my spirit duplicator. I can take a printout from my computer's ink jet printer, scan it with this machine and image it onto a thermal stencil paper, and then run it off on the spirit duplicator (a.k.a. "ditto machine") and make about 30-40 clear and very inexpensive copies in less than a minute.
Omg thank you. I for this machine as a gift and thought it was a dud... Thank you.
Most likely your roller needs cleaned use a damp paper towel or a Lysol wipe and let it dry and try it.
I just got one of these and this video made way more sense than the instructions 😂😂 much appreciated, my dude 😎
You bet! When I first got one I was lost!
It works for me I got the gray one .. finally no more tracing over stencils to move the tattoo two inches to the left
Can you make the image any size
Thanks man you're helping a lot of people
You just helped a whole studio learn how to use this old timey thing 😂
Thanks short and sweet i didnt have to watch 15min of talking thanks man 👍
Thanks for this informational to the point vid!
Thanks! That was exactly what I was looking for dude!
Because of you i bought one thank you!
Thanks buddy for instructions is such good way😍
Thanks man I really needed This I watched like 10 times
Thanks so much! really helpful and straight forward
CrystallizedBear absolutely
Thank you! This was SO helpful!
thank you last video i watched almost broke my brand new machine so this really helped
Bro this video helped soo much definitely got my sub
Thank you for the video it really helped alot...I have the exact printer......
Thanks for the video, the instructions that came with it blows dogs for quarters.
Bruh, I’m late to the party, but thanks I liked And subbed. Simplest explanation on the net. 💯 bro
thank you so much , machines are really unintuitive to me so i needed this bad. super helpful
Bout to order one. 😌 be a time saver for sure!
these do the job well enough
Thank you for getting straight to the damn point haha loved it
You sir are a legend, thank you!
Anytime bud
man i be having to draw everything out by hand it takes almost 30min some times im glad i seen this
so much better then the instructions lmao.thanks man
My boss was tired of me asking him how to use it, LOL. Thanks for saving me!
Maya S lol anytime
so helpful 🎉 thanks!
Thanks for the video!!
Imagine you go to get a tattoo and your artist is watching this before hand
Lmao best comment for sure
Awesome clip bro...thanx..any idea if works with printed images or patterns also?
So if I print out something do I need to trace that also or will the ink from the printed picture be fine to place in with the stencil paper?..
the ink from the printed picture will be fine, just dosn't really pick up anythink that's not dark, so the light shading and such
I always make a line drawing of my tattoo and print it off then put it in the thermal copier. But make sure the lines aren’t too thin or some copiers won’t pick it up as well. Plus use good thermal paper some papers don’t show as good as others.
It actually will come out better if you leave the yellow paper on
Mine just arrived, can you explain abit better?
Agreeed
Nah my stecils come out spotty if I leave the yellow paper on, like if there's not enough pressure on the transfer paper itself if you leave the yellow paper on
Solid ass video 👏🏼
What thermal copier is this and where can I buy one ? I’ve seen ones similar on amazon but they have horrible reviews
Ebay 79 + shipping comes out to about 110 bucks
Thank you sooo much... 🙏🙌🏻
Can u use regular stencil paper or does it have to be thermal?
Thank you for you video very helpful
thank youu!!
So did you draw that picture freehand? I’m only going to do tiny tattoos like a word or small symbol because I’m a PMU artist only. Any advice where I could find some tiny symbols to print?
@@triggamortis1 thank you
So does it work with printed design?
@@skylerchan7746 yes
@@laurennuttall459even if the picture has tones like blacc and grey does it do an outline of the picture or it can only use outlined pictures like how the video is doin
Works well
what does the photo function do?
Thank you for you video. I got a question. Can you copy an image from the web print it on regular paper and place it in the transfer machine and will it copy it to the transfer paper and apply it to skin afterwards? I wanna get into tattooing. Just wondering what's the best route to take. Cause I can't draw. 😔
Shouldn't be tattooing if you can't draw.
@@nelsonkai I can trace if the image is premade. That's why I asked if the transfer machine works with images printed from a printer.
@@Sniperop36 yes it will, but it's only really good for outlines
learn to draw and shade before you get anywhere near a tattoo machine. Just because technology exists that allows you to copy doesn't mean you should rely on other ppls work. Your work will be shit otherwise.. jus sayin
All of these replies are major L's drawing and injecting ink with a needle are two separate crafts. I cant draw. But i can fkn tattoo. Hes right about the tracing. And to answer bros question cus not one of yall did YES. You can print on regular paper!
Does it work if you have drawn on the stencil paper instead of regular paper ? And does it only work for pen drawings or pencil as well ?😢
Thx a bunch thought I wasted my $ lol & almost threw the damn thing away😉
Hey, thank you!
Did yours come with a power cord cause mine didn’t
does it also work when i use just a drawing made with a pencil?
Yes, I've tried with a black drawing. Blue I don't know.
Does this work if the image is printed or only if it was drawn with pen or pencil?
It works with printed also
The answer I've been looking for
what do u do if it’s leaving like (3) roller marks??
Thanks mate!
Can you please make a video about the settings. I.e. when you hold the stop button for 3 seconds. I got this stencil that I can't figure out what settings to use. It just colors in everything black. The image has solid lines with light gray but the gray is being printed in flat black
It's for lined drawings not pictures.
I'm a little confused. How does the printer work? As in, what makes the image transfer to the purple sheet? Could I draw an image onto printer paper using a biro pen/pencil and it'll work? Or does it have to be printed out? I really don't understand
U don’t have to
I don't understand it either
Not all heros wear capes!
Is it possible to use thicker paper to copy or does it have to be regular printer paper?
It can work with paper a little thicker than original printer paper but not too much thicker.
Is there a way to use tracing paper with the drawing in pencil or marker, or does this only work with a photocopy or printed paper?
Can you use a printed image like from standard printers or does it have to be hand drawn to be printed on thr tattoo transfer paper
Yes you can
Thats exactly what i was wondering
Sounds silly but what is the gsm for the white paper for the printer for the design?
Thank you!
Quick question can I use my printer to print off a outline then run it thru or does hit have to be a stencil from a drawing?
I use my hp printer to print off out lined stencils then run them through this all the time.
@@TheBeardedTattooer okay thank you so much!
Hey buddy this is probably a dumb question what’s the difference between the two deepnesses? Which one does it work better on? Also what thermal paper do you think works best in it because in some of the reviews I read about it before I bought it said some brands of thermal work for crap in it
Brandon deepens 2 is darker and spirit thermal copier paper
Awesome thank you
How do you transfer the image onto your skin? Thank you for the video! You were very easy to follow along :)
You need to use stencil stuff, you can buy it on amazon, you spread it over the skin, let it dry a little bit adn the you place your desing over it, place it like 3 or 5 minutes and take it off. You can use deodorant instead of stencil stuff, some people say it is nice, i havent used it tho
you need to learn saftey of tattooing first if you asked this question , you need to learn from a tattoo artist all the basics of hygien
Most deodorant sticks work
@@Exportlungs but NOT antiperspirant, has to be the green/blue bar style deodorant. Like Speed Stick or old school Old Spice. I always wondered why tattoo shops always smelled that way.
Could you use a iron?
Question can this thermal printer work with an image printed off of an ink jet printer??
When using a thermal printer does your design need to be inverted?
you have the option "Mirror" which solves that problem
Are you able to do a video on how to not waste the thermal paper like of you're doing smaller tattoos, I feel like I have a lot of scrap and not sure of I can reuse it
Hey mate nice vid , I have the exact same machine and it worked ok about 10 times, now it just prints really weak stencils with lines all across it , have u had any trouble like that ?
I have the same problem but straight from the beginning, it also happens that the blue paper sometimes sticks to the machine ruining the stencil. Is the second machine I had returned to amazon.
Another person said try leaving the yellow sheet on I guess. I have no idea
How old are the same machine had the same outcome blue streaks all across the thermal paper sent back to Amazon!!
Hi Adam, I got one of these and worked as shit. Changed for another one (amazon) and is a little bit better, but far from ok.
And I'm doing everything exactly as you. Do you have any advise (special paper, any specific seller,...)?
Have you tried more than one or you hit the jackpot at first?
Thanks in advance for your help!
Did you try a simple stencil? My simple one came out fine. It's the ones that have gray that a hard. I did notice the paper needs to be flat. The paper that came with the printer was all rolled up
Yeah my first one prited pretty shit but I ordered another and works good
And they are supposed to be used with thermal paper
Can the picture be printed from a regular printer in then stenciled with the stencil printer ?
Any update? I'm curious myself
Yes, just remember a thermal printer is for line work.
how do you like this machine? I'm guessing you preprint the image on a regular piece of paper first. how is the quality of stencil and machine holding up, does the stencil wipe off easily?
719Moto Mx No, it works similar to the hand made stencil so is the stencil quality.
Carbons carbon its how you apply it
how do you make a dark photo light or more like line art?
Would I need a regular printer for the picture
Thank you 😊
Did u trace your drawing with pen before u put it in the machine?
Nope thats what the ink paper is for 😊
cool man thanks
How do you prep the original image before running it thru the printer?
Do you need help?
Wait. Does it only copy? Or does it print from a digital device as well?
Thack you soooo much...🥰
So I've just received my transfer machine a few days ago and tried it for the first time today. My transfer machine leaves horrible lines through the whole page that completely ruin the design, I've tried numerous different types of paper and designs and it all turns out the same! Does anyone know the cause of this, and how to fix it??
Verify it's not wrinkles. If the paper is not set straight it will make lines. Happened to me
I got mine today and followed every instruction to the tee, the copy images moves through but the thermal paper doesn't move an inch so it's unabke to even copy it onto the thermal. What do I do ? It's brand new the exact same as this one
what printer do u use?
Can I use a printed picture from the internet?
Can I print the picture I want from a regular printer and then have it transferred to the stencil using the thermal copier?
Yes
Is this design just for tattoo stencils or is it just a typical thermal printer? I have been looking for one for a while but the ones made specifically for tattooing are expensive as hell
This is for tattooing
thank you!!!
super video
#
Damn!!!! Watchin it again🤣🤣
so do i need two printers? one to print the original drawing and the other thermal printer?
For this type of thermal printer yes.
So is this just printing a picture onto normal paper with a normal computer printer then this machine transfers it to the tattoo transfer paper? I’m sick of tracing off my phone and the pen not transferring properly :(
watching this as I turn on my printer 😂😂
So you need to print out a design with a regular printer first and then print it on the stencil? Because I just bought a thermal printer and I don’t have money to buy a whole other printer
If it’s this thermal one then yes. There are Bluetooth ones WiFi ones and usb ones that you don’t need a printer but if yours isn’t one of those then you’ll need a printer to thermal copy it
Can be used to print a stencil directly from the computer?
Great question...i wanna say no but im not real techy so im not sure
Can you help me a bit? I bought my printer and some paper, and when I apply the stencil on the skin (with the stencil stuff) even after 15 minutes of drying, the stencil dies when I pass the napkin (with the water+greensoap)
:( Can it be some option on the printer?
Do I have to use more stencil stuff?
Halp T__T
Asi funciona hermano, tienes que tener cuidado de quitar el stencil solo donde has tatuado y tatuar de abajo derecha a arriba izquierda
I have had my machine for a year have not really used it but when I did it worked now it just prints full blue pages any idea Why