OLIGHT SWIVEL PRO MAX REVIEW
Vložit
- čas přidán 13. 07. 2024
- Prepared Guy shows you an honest review of the new 1,600 Lumen Olight Swivel Pro Max that also doubles as a battery bank/ 18 watt fast charger for your phone.
BUY SWIVEL PRO MAX HERE:
www.olightstore.com/?os=ALUJ&...
10% OFF DISCOUNT CODE FOR NON SALE OLIGHT ITEMS ONLY: PG10
Not valid during flash sales.
CHECK OUT EVERYTHING PREPARED GUY HERE:
linktr.ee/preparedguy - Zábava
Thanks for the video. I ordered a few Swivel Pros and a Swivel Pro Max. I think these will be handy for my business and in my shop.
Solid look Guy, this type of lights are very handy especially the ones with the power bank option thanks for the look
I'm probably getting it but wish the middle size one also had a power bank option.
How is the tint for distinguishing paint or wire colors when working? Any significant difference from the original? I left my original stuck to the attic access panel after getting out the Christmas decorations. LOL. By the way the magnets on the original are great for sticking to the truss plates in the attic to hold the light in position.
It should be ok for painting if you've got a good enough eye.
You really produce some great content!
Thank you, I really appreciate the kind words.
Thank you for your video.
Questions : warm white light or cold white light ??? Are the batteries easy to replace ??? Thank you
I had the same question and gave up digging. But as far as I can tell it's probably in the 6,000K to 6,500K range.
@@PreparedGuy Thank you anyway
Around 6000K, and yes, you can replace the batteries, but it's not an "in the field" job, and is a pain in the ass that requires electronics engineering knowledge and skills. You don't get to unscrew a cover and stick in 4 more 18650s or whaterver. Which is Ok, but annoying,. The facility to easily replace the batteries would make it perfect.
@@ditch46uk thank you for your answer
Hello.
I bought this largest Olighta Pro MAX and it is great light times even longer than in your test which is a plus. Everything works and is great only one thing worries me the 150 degree rotating element in the middle positions has a slight side play in the outer positions is stiff. Is this the case with your unit? I would be grateful for an answer. Best regards.
Mine does not experience the same issue. I would contact customer service and let them know about the problem.
@@PreparedGuy Thanks for the reply, but I wrote a little imprecisely. I was referring to the slight play between each click/jump of the base when trying to move it to the right or left
In my opinion the front flashlight would be out of place in this model just awkward really, but the magnets are definitely a con
Hello again. I apologise for my spelling as I don't speak English well and use a translator. I watch your reviews often and find them most factual and will again ask you for help. With the torch as I wrote earlier I am satisfied but I have one problem. Sometimes there is a problem when I switch to red light and try to switch the torch off, of course waiting at least a few seconds not to switch to flashing mode the torch does not switch off but the charge level LEDs go off and the torch still works. Pressing again turns the torch red and the charge level LEDs are on, as if the electronics had interpreted the previous press as a switch off. Pressing again switches the torch off. This mostly happens when I switch to red mode from high white mode. I rather rule out a fault with the switch, as nothing has ever happened in white mode. Of course, it doesn't happen every time, let's say about 2 times out of 10 switching on. I would be grateful if you could check your unit to see if this also happens sometimes and if it is a design fault, as I don't want to pointlessly send it for servicing if it turns out that other units also have this problem. Best regards Michael.
Hey friend, it sounds like you might have a defective unit. I would advise contacting customer service for this issue as it seems to be a valid concern. My swivel does not seem the have the same issue after I tested your method several times to try to recreate the problem you've encountered. Thanks for sharing your experience and I hope that olight will resolve this issue you you. 😎👍
I only buy the s2rs now but these swivels are too expensive
The back of the lights says 1500LM but the brochure and box says 1600LM….??
Sold out..
😲 wow I wasn't expecting that
The Kleine Worklight is better and cheaper. Plus 8 hours of runtime of 460 lumens.
I've tested the kleine work light and unfortunately it failed all my tests that's why it is not on the channel. The one I tested was very inconsistent and didn't live up to the specs. I've had some very good experiences with other kliene tools lights.
Always a disappointment when non-replaceable cells are low-capacity...
Aren't they 18650 replaceable cells x 4 though?
Meh… for the price it’s not even that bright
Yeah it's a bit over priced for sure