Straightening a bent ditching bucket
Vložit
- čas přidán 15. 06. 2024
- Repairing a digger ditching bucket that’s had a bit of pain on.
0:00 Intro
0:39 gas torching the old edge off
1:20 arc air gouging welds
2:45 winching floor straight
3:45 grinding welds flat
4:05 plasma cutting
6:20 fitting new edge
8:45 welding
12:32 outro
Please like and subscribe
Thanks for watching - Věda a technologie
Thanks everyone for the feedback on the video. Lesson learnt about the music! No more music from here on. 😁
Greetings from Kenya 🇰🇪. I think the music was great. Maybe just the volume. And anyway, what better way to fill in the fast forwards and Timelapses with such great music…Looking forward to more videos…keep up the great work you are doing… subscribed 😊
Music is fine just waaay too loud.
@prodidzsáj yeah right, I'll bet that made Snowball feel great. You come here for the music and not his welding skills. I hear CZcams has exclusively music channels, maybe you should go listen to one of them.
@@chuckerchuckerton7046 I agree, the music itself is actually quite nice. But I came here because I'm learning welding and I'm trying to pick up some skills.
Greetings from Chicago..
Brilliant videos and super work..!!💪💪
The video is great! One suggestion is to manage the volume level of the music you add. Don't let it be too much louder than your voice or the noise from grinding/welding. Keep up the great work!
That's what I felt too. The voice too low while the music too loud, gotta switch volume up and down everytime. But I love this kind of video.
Great video, you don’t just fix the equipment but make them better than new. Great job Oli.
I like the music but I have to pump up the volume when you talk. I think your humble attitude is great your knowledge of the field is beyond your years. Keep up the great work1
It’s nice to see a young man who takes pride in his work. Keep it up. You’re doing a great job!!!
Well a follow on for a sunday video . Not bad for your 3rd video .. now watching again a year later and yup it shows how well you have come with the quality of your videography . Still amazes me how much damage an operator can do with very little effort .
Ollie you are an extremely talented individual. My father spent his entire career working in sheet metal. You remind me of him. Keep up the good work and may you be immensely successful.
Great video! Greetings from Australia. CEE and ICweld are great also. Workshop noise is often preferable to music. On CEE's early videos he had a similar learning curve with music/noise levels/ workshop noises - you're in great company! Keep up the good work.👍🙂
You are right, sound levels are all over the place. Have to turn volume up to hear his voice, then the music comes in and is blasting loud. other than that, great content. The music is not really needed IMO.
Very clever work! Nice to see use of a PAPR, your older self will definitely appreciate it!
Makes the job much nicer. Not breathing in any grinding dust or harmful fumes. Thanks for watching!
Your welding skills are great. I appreciate watching your method of approach to repairing the bucket.
Thanking for posting. Dan 😊
Fantastic work and repairs. Had to keep turning volume up and down though.
I agree with Fred Fred about the noise level vs music vs speaking. I also love CEE’s content and I’m glad I came across your vid early days of your content. I really want to see where you’re going with the channel and I’m glad to subscribe early to watch you and the content grow….. please keep going, you’re doing what most of us don’t have the guts to do. Looking forward to more content. 🤘😝🤘
Very entertaining and educational, all these small tricks for getting things done. Highly appreciated, thanks a lot!
Class work mate - surprisingly satisfying to watch. Please keep content coming!
Clearly a professional repair that I can see from my living room couch.
Good thourough job. You took your time and got it right the first try, My Dad told me several times “if ya had time to do it over, ya had time to do it right the first time! “ I wish I’d of paid attention to more of the good stuff He taught me … you’ll do fine Sir 👍
Great job and a very impressively equipped shop.
Just how it should be, music not necessary, but I understand some people like it. I’m looking forward to the next one. Thank you.
Thank you. It was fascinating to see the techniques you used. And your meticulous work was impressive. Even if I can’t weld, I can appreciate the work of a craftsman.
Keep up the fabulous video work! I agree with other comments that your work is immensely satisfying to watch.
Excellent explanation of the problems and how you resolve. Clear, concise and very efficient
Well impressed with your skills, abilities and the quality of the final outcome. Keep up the good work. 👍👍
Excellent video - you turned the bucket from scrap into a first rate attachment
Nice job. I was an Oxy/Acetylene cutter and loved working with it, never really had a chance to try plasma as my job became more mechanical than welding. Well done getting that edge straight, the use of the block and wedge was a good idea. 👍
Music plays too loud on this video. Great welding
Thanks for the feedback! I’ll sort this for the next video.
I was going to say the same. Enjoyed video but having to turn down music then turn back up to hear what your saying. other than that great video, looking forward to the next one.
I just turned the volume down, loved the video, is the bucket yours, have you thought to weld ware stripe to the underneath??.
No it’s not my bucket, I was just returning it back to how it was. Wear strips would of been a good idea.
Loud torch, soft speaking, loud music, soft speaking, more loud noise...
Beautiful bucket for Rory
Cracking job. How satisfying to see it come back straight and very strong. Lovely welds. 👍👍👍
Wow, miss working steel! Shipyard repair and ironwork. I was taught by a WW2 vet that did damage control in the Navy, man had some tricks! Thank you for the video!
I bet he was a great man to learn from!
It always amazes me how people can destroy equipment like that. Your repair certainly has made it look like new again.
Am surprised that the rings were intact, clients broke the other two you worked on. You're the only other guy I've seen doing gouge welding, seems really useful. Curtis from CEE in Aus does it also. Lastly, you are very soft spoken, might need a mic like pastors wear, over the ear on a wand. Good job straightening that bucket.
Great videos.. just like myself at work. I spend most days repairing buckets exactly the same way. Mainly new floors and cutting edges 👍👍👍
You do it all day, then watch video's about it at night.!!!!! It sounds ridiculous, but I'm same. Farmer and part time engineer, then watch video's of same. We're sad, lol.
@@samuelrobinson9012 yeah drives the wife mad, sat watching welding videos all evening after nipper is in bed. She will happily watch cutting edge engineering though😊
Really liked the block and wedge solution.
great job first class work👍
I really like that wedge trick ...Going to make one myself...
I know Kurtis from CCE must be proud of you as you seem to be the British version of him.
I've tried to straighten my buckets before with varied success, but this teaches me that sometimes it might be better suited to just cut out a section and replace or reinforce. Thanks.
Breaking out rock with a 220x jcb while watching this
Loved the music
A pleasure to see a craftsman at work. Thank you 😊
great job man wouldnt have guessed its only your 3rd vid
Your understanding on how to move that heavy metal back to shape is exemplary!
Great job looks perfect,your customer should be delighted
Your doing very well thanks, don't change oh you are for nobody just be yourself and that is what I like about you great.
I love engineering I have watched a lot of your videos some I haven't commented but I like all your are a hard worker and nice sense of humour👍👍
Your off to a great start Lad ,best of luck with all you do !
Thanks!
You really are pretty good at what you can do.
Very good videography for starting out and excellent subject matter. Keep it up and cheers from California.
Great vid. Most folks would have just tossed that bucket in recycling ♻️. A bit of time and effort and it's usable for years to come.
the block and wedge is a great idea, thanks!!
This just shows what a classy guy you are., I would have cut right through that bucket center support !!!
great video I think you did a great job fixing that bucket be proud, not many people take pride in their work.
Thank for sharing , always a pleasure watch your project, your music is awesome 👍👍👍👍
Would be awesome to see specifications on steel/welding parameters and explanation on why you choose them. But in general great content, keep it up!
Solid repair - I would like to see more shots of the welds when finished.
Outstandling repair and to be honest, wouldn't have thought, given I'm no heavy metal machinist, there would've been so much to the process. Loved the entire video, learning about welding a bit over here, then over there, so as to avoid heat warping and it was a delight to see the finished job, done to a high standard.
Crikey! what a lot of work [but guess a new bucket is a lot of money], great to watch skill at work [3 mm is thick steel to me]. Great channel thankyou.
Thought was a great project, good explanation and fast fwd at the right points. Keep up the good work!
Great video, might be worth mentioning what materials you use like grade of steel, what mig wire/speed you use. Maybe film that piece you use in the centre of the bucket being cut out? Maybe do a close up of a arc shot with a camera behind a darkening lens to give the viewer a sense of what you see?
Subscribed and look forward to seeing this channel grow 👍🏼
JUst keep doing what you're doing. Keep informing as you work.
CEE chanal. Will give a good ideas how to perform ur videos and many tools to work with. Love to see more of ur work.
I think CEE has his missus doing the videos for him, now that's a tip!
Impressive….add a little more “why” to the how. Helps us novices follow along better. Thanks.
Good job and good video. The music is too loud compared to your voice.
Thanks! Yes, still in the editing learning curve. Watching you, cce and icweld are the reason I wanted to start making videos so thanks!
@@snowballengineering I agree with On Fire...soft spoken is when your with the ladies, out in the shop YELL MAN...great start and best wishes to grow your channel!
Thanks for the videos and great novel tips working with heavy steel parts and welding.
Great repair again young man.
Great job.
Well done on a tricky job 10/10.
U are doing great work ki like watching u videos
Good vid. with good filming Very interesting to se problems solved.
That was good work. Great looking welds.
Awesome video! I’ve always wanted to learn to weld. Music was a bit loud given your voice is a little soft spoken but hey… loved it! Watching from Maine!!
Good video. Only complaint was the music was loud but your voice so soft. I was constantly turning it up so I could hear what you were saying, only to quickly turn it back down to keep my ears from being blast. I enjoyed the video though. Very interesting, keep them coming! 🍻
Good video keep it up , I'm learning a lot.
I think you're doing an awesome job May God bless you more
My brother rocking awesome video look forward to more content thank you for doing your thing
Good job ! But when you weld turn your wire feed down and your power up a little bit you will get smoother weld but did a great repair
Great videos! Many thanks for the trouble you gone too.
Very nice job welding. I hope to see more of your videos
I got recomended your first video, I knew I needed to subscribe. I'm on this 3rd video and I've already learned a bunch. The clamping of the metal to the straight edge, then using a wedge to straighten the main bucket part was great. I''l keep it in mind if i ever run into a situation like that. Great work, keep the videos coming, good explanation of your work, and great skills you have. 👍 Thumbs up man!
Glad to share some knowledge and experience. Thanks for watching!
THIS LOOKed like a perfect application for flame straigtening look it up! cheers
Excellent! Great work!
hell thats some power to buckle that ! well done
Well,you certainly came up trump's on this just shows what lack of maintenance does, great content as usual regards 🚜🚜🛠️
Great job! I will be here for the next ones 👍
Awesome vid of the troubleshooting and repair process of something like that. it reminds me of when I was the shop foreman for a big masonry company about 8 years ago. One of my forklift operators ran over a large steel grout tub and buggered it quite well. Those are surprisingly pricey and the bosses didn't want to buy or build a new one. Got out the winch, porta-power, some hammers and prybars and talked that 5\16 steel back into submission. Had about 16ft of broken weld to repair on it too. Took about 3 hours and after labor and consumables cost less than 1/5 of replacing it. The office folk couldn't figure out how I got it back into shape. My back was less impressed with my efforts...
Same driver also ran over a gas saw and a wheelbarrow that same weekend. I had the site foreman let him go after that fiasco. How you miss a bright orange saw, blue wheelbarrow and 5ft long steel tub is beyond me!
hahaha Great story. Sad to see him go, but DAMN. lol Maybe that needed to be his wakeup call, or he was drunk.
Great job
You do good work. On point.
Good job. it was fun to watch.
Excellent repair man, you make it look easy, but I know it's not,great video, keep'um coming..
Awesome video thanks nice clean work 👍🇬🇧👍🇬🇧
Very entertaining video and educating, cheers mate.
Very good job !!!
Great video! Music ok by me! Keep up the good work!
Grand job young man!
I have to say that’s a very interesting way to repair it. I’m not claiming to be an expert, heck not even an amateur.
Nice clean work. 💪💪
Nice work. Keep it up and I bet this channel takes off!
Well done
Hello from Tennessee USA
Hello from Yorkshire England.
Thanks for watching.
i just subscribed and started watching you videos. I really like them. I dont usually offer advice but you did kinda ask so one thing I think would be helpful is similar to what Kurtis does at CCE. At the beginning of each video he shows a picture of the piece of equipment that the part came from and a little bit about what it does. I really like this. I'm only on your third video so maybe you do more of this but its just something that stuck out to me. Thanks for the great videos :)
Nice work mate.
Awesome work!!
Really great job 👏
Good explanation of your plan of action. Which produced an excellent fix of the bent bucket Good use of fast motion. Excellent video. I’d do something about the gas leak flame from the nozzle tightening nut. Try using an engine valve lapping method .caution don’t leave hydrocarbon deposits due to the explosive reaction with oxygen under pressure.
Great skills man!
A tip on the video production. The volume of the music and your narration does not match. I wanted to listen to your comments the volume of you speaking was rather low, then comes the music with was way higher. So as not disturb the rest of my family I had to adjust the volume up and down.
Great job!