Crazy Fish Flight 3 22-6-2024

Crazy Fish Flight 3 22-6-2024
met nieuwe motor(Axi 2204 Race) en de setup iets verbeterd(minder trimmen) en vliegt nu op 3S 850 40C lipo op zich ging het een stuk beter echter en vliegt ook sneller maar bij net iets voorbij half gas hield de regelaar telkens in de batterij is oke , dus dat moet ik nog even oplossen/uitzoeken waardoor dat komt.

[@ra3or]

either the motor screws came loose from the motor mount, the motor has bad bearrings or the prop is out of ballance, because it sounds like its more vibrating than pushing and its losing thrust. Other than that, love the model :D #foundNemo

[@Modelairplane1980]

No screws are loose and prop is at ballance but mayby the pitchtravel at normal flying mode is a bit too much or the blades are too tightend at the bladeholder, allso a prop inside a fuselage make more noise but this flights is a little try out to make some abjustment to find the sweat spot see more at facebook.com/media/set/?set=a.4174340435915433&type=3 or with the old motor facebook.com/share/v/t5ofNtoES5K47pU5/

[@ra3or]

Love the work you did to get rid of extra weight and to add the vector thrust.
In the static test video, you can hear the vibration with throttle up; try a different prop, or maybe a different prop cone; also check that the motor mount has no play on the ball joints.
How much is total weight(without lipo)?

[@Modelairplane1980]

@@ra3or 250 grams