Driving my TEMU SUPERCHARGED KEI CAR for the First Time!
Vložit
- čas přidán 26. 06. 2024
- It's finally time to test drive the Temu Supercharged kei car for the first time!
MERCH ► sammit.net
FIND ME EVERYWHERE HERE ► linktr.ee/sammit01
BECOME A MEMBER ► czcams.com/users/sammitjoin
Why I drink Gamer Supps ► • Why Gamer Supps?
#Subscribe
#SAMMIT - Auta a dopravní prostředky
Haha, The look on the pedestrians faces were gold
Sounds like a full scale RC car. lol
Rc 2t be like:
It really does 😅
Nitro rc be like
@@isaacjackson9019 bruh
Golly that thing is so damn loud lol
It's being overspun imo. The superchargers already in too high a boost at low RPM's
@@MrBluePoochyena dose make sense.
Supercharger wasn't meant for engine like this. It was probably for a generator engine or something similar that runs at a constant lower rpm.
@@Berm_Blaster There's a guy who has a 730cc Kubota Diesel swapped Honda Insight with this same AMR500 and he's running 10PSI. Doesn't sound nearly like this
@@Berm_Blaster This type of supercharger was literally used on kei cars, it's just most of the ones available online have been "refurbished" in china, pretty sure they were used on some subarus among other cars.
Larger pulley and front mount = success. Too bad these videos are posted after you make your choices.
Bigger pulley = Less Boost. I'm guessing you didn't read the comments on the last video 😅
He said he read the comments and mentions about the pulley at 11:35… but whether he followed any of the advice it is a different question 😅
@@Fabulousprofound168 100% didn't follow like usual
@@Twenty_Six_Hundred He probably films this days before it's posted
I'm guessing you didn't pay attention to this video
Car doesn’t run well bc it has to much boost
Replace the plastic screws with some better ones, plastic ones are so dumb.
When you have to yell “ sounds alright “ to hear yourself over the engine it probably isn’t, lol !😂
😂 Sam “I did a bit of research” yeah ok comments section was pretty clear on what the issue was in the last video , heaps of people backing the same solution.
This video was filmed before uploading the video or something. It is kinda frustrating to see Sam didnt fix it. So more video.
When he spit on the bolt I almost died
Lol i knew right away where he was going with that. Lol
Had to give that hawk ptuah
He spit on that Thang
I know this is supposed to be a fun cheap no-brain build, but you should definitely overengineer this thing!! Get a real supercharger, front mount, and everything to make this thing run and ride like a dream ❤❤
Have someone remake the supercharger impellers out of metal and replace them and see what these little chargers are actually capable of
That's funny... I commented the same thing on the last video. I'm sure he has a hook-up at a machine shop somewhere. Metal impellers would probably make it sound less awkward to. I think we're the only 2 to say it so far
@@travisstamp7428 well let's just hope he sees these lol
Was thinking the same thing. Should be pretty easy to make
My sides readied themselves for orbit when he hawk thuh on that thang 😂
That welder sounds like dubstep
If you wanna run something like this on a stock ecu you have to frankenstein your map sensor find one from a factory turbo car that has the same first 5-6 digits of your part number and plug matches then get 150-200cc bigger injectors this may require you to make new spacers
Forgot the fuel pressure regulator either buy aftermarket or you can do the same as with the map sensor but it could be more involved adapting to suit your fuel system so aftermarket is best
Sounds like a cat is being tortured lol
Its a knokoff rx-7
Bigger pulley = less boost = less motor go boom
1 dollar motor = more fun replacing engines
I'd definitely double check the max RPM for the supercharger, I've also seen people put a second throttle body before the supercharger to reduce noise.
just put a delta black fan on that intercooler ;) the king of all PC fans ;)
Ages ago I did the math for how many maxed out delta fans in a bank would make 1psi of boost, from memory it was somewhere around 8-10
@@DJKr15py i was thinking on cooling the intercooler ;)
8:10 your face made me pmsl 🤣 love your enthusiasm Sam 🤙
Tomorrows video intro with may “HOK 2OOohAH” 😂😂😂🤣
SAM, it was designed as a closed system! You just added lb/BAR weight when you put the intake and boost on it.....AND PUT ANOTHER COLD AIR INTAKE ON IT! SO YOU KNOW WHAT TO DO , SAM ! HAVE FUN!!!!
That thing sounds like when you slam your shoes on the back tire of a bike to stop 😂
Sounds dope!! Engine management and larger pulley should do the trick. Either way, it's super fun to mess around with 😛
Replace the blower with one you haven't touched and see how much better things are . Top vid btw 👌 ❤❤
I think the next steps are uprated fuel injectors, a 2 bar manifold pressure sensor, a wide band oxygen sensor and as you've mentioned an ECU remap, if it doesn't die first haha,
Maybe the stock fuel injectors from a turbo kei car will be good if you find some that fit
My supercharger has a bpv, but it's internal. The valve is open at no-partial throttle...thus bypassing the supercharger rotors. When you give more throttle the more the valve closes forcing air into the supercharger, bringing boost up for the appropriate throttle. Full throttle gives full boost until redline, 75% throttle will give full boost until it hits 5kish runs and slowly opens the bpv bleeding off boost.
Sam! The input shaft has been turning without gear oil the entire time you are running the engine. Engaged clutch = turning input shaft. Depending on where the shifter forks are, you may have had multiple gearsets turning as well (even in neutral). You may get away with minimal damage because there was no load, but it's not something I would risk. Don't want to see you blow up another gearbox man.
I got an idea for ya.... reroute the air comming out of the blow off, down into the exhaust. It will create a syphon effect on the exhaust to suck it out of the engine.....be entersting to see the results.
Plum back but not into exhaust. The exhaust gas will just pressurise into inlet. Not good
@@Pete-hy4mq unless the y pipe installed toward the end of the exhaust, then it wil cause a suction.
@@Pinki-77 you plum it back into inlet not exhaust. No matter the set up any restrictions at end the system will build back pressure not to mention heat. Its just not ever done that way
Oh boy you need to go a step down colder in spark plugs and you need to gap them down quite a bit....
Sam: let’s not blow it up
Also Sam: proceeds to rev the beans out of it
favorite build , i waited all day for this
Sammit diecast car sounds sick but blow up that one then Yamaha R6 swap,Turbo,aero ,wheels/suspension and have way more fun grip/drift kart 👍
Man, thsese updates come just at the right time 😂🤙🏼
As a parent, i felt that reference very deeply. 😅
Delete the intercooler you don’t need it, put a pipe with only a blow off valve 👌👌👌🤙
Still needs a bigger diameter pulley, there's too much boost to control right now.
Sammit you been spinning that knob for a long time and it doesnt feel tight hmm 😂 you might have a problem
Nice progress!
Sounds fantastic
Ooosh when may said "Im fine", I got war flash backs i swear..
Those street pulls were crazy!!!!
Widebody that little bad boy!!! Just get some offset rims and some generic overfenders and that should do it. No need to go super duper baller on it.
Dammit sammit didn’t read the comment to change to bigger pulley 😅😅😅
This was filmed a day before the last video went out 😭
Thanks for putting miss rachel in my head too! 😂
the bypass will be tough for the ecu to balance, you need a larger pulley to slow down the SC to a more usable rpm
First puddle that is going to suck up so much water.
Just weld the diff in the transaxle. You have to find out if you can do it at some point.
Love it ill be in japan in November im so excited
It's definitely time to get on the abandoned S-15 heck do an engine build or teardown for that car so you have some kind of content on it that will lighten the work load when it is ready to become a non abandoned car again because it although inside somewhere else from the original outdoor salvage spot it's definitely still high on the abandoned listing you were adamant about saving it from. You are letting this great content fall to the wayside Sam!!!... fix this issue.
Try putting an inlet oneway fitting where you fill with out and drill out a hole underneath and thread an outlet fitting that way you can circulate the oil to avoid overheating of the unit.
Quality funny video.
Is there a KEI class at Time Attack Tsukuba?
I wouldn't drive through any puddles or rain with the filter right on the bottom like that
It sounds like what a real life hot wheels would sound like 😂
Yup, definitely bigger pulley 😂Stoked to see what it'll be like when you get the pulley sorted and throw a link in there though!
common problem with those Superchargers is the oil in them. u need to put some different hq oil in it for it to work proper and sound proper
Could Use a clutch pulley off a Toyota supercharger with a hobbs switch or install map sensor before supercharger as its seeing boost at idle and having a stroke.. just a thought. You do need to turn up the duty cycle and frequently on the tig welder tho just test on scrap 1st .
fire build
Sounds like someone's sat in back with a weedwacker lol
yeah buddy!
Bros breaking hands 🙌 playing solo slap chop 🎉 explosive results bro ggyat by his own back fire 🔥 hahaha
Bro is a menace to society with how loud that little super charger is. I love how slow the car is too... Not sure if that's the goal 😂
The hawk tau killed me you funny
Centrifugal clutch pulley as used in the 4agze faster it spins boist is increased and closed at idle opens at about 3500 rpm roughly from what I remember.
2024 Sam “gotta give it that hawk tuah”
I think it would be fun if you use the van for a friends/CZcamsr loaner car when they are in Japan
😂😂😂😂 we can all thank Mrs Rachel 😂😂😂😂
that’s a fun shop van
Hey Sammit, i don't think you have enough tires man!! hahahhahahahah
bigger fuel pump? boost reference fuel pressure regulator? fuel injectors twice the size as the injectors on the engine? set regulator at half the pressure the OEM system was set to... tho that methanol injector in front of the blower idea, would be a big fire thing if the blow off valve was piped into the exhaust... confusing translations?
just in time for my summer work :)
keep the kei-car stuff coming... I would love if you venture to Toyota Passo QNC10 /Daihatsu Boon M300
DAAAMN Hawk Tuah made it all the way to Japan? 😂😂😂
car sounds like a whipper snipper haha
Just for fun you should throw an eBay FPR on it and see if it gets slightly happier.
needs more fuel, running too lean on boost. install a wideband and install an additional injector in the inlet manafold
would probably need a larger exhaust now too
im sure it pcm (powertrain computer mode) for engine aint setup curranty because there is 2 sensor on exhaust and 2 sensor on intake if you bypass intake sensor them yah it going shut itself off because it aint able to read air flow to adjust fuel and air rate so you ended up going back installed intake sensor to fix few issues so dont need to reprogram it (i have done it on few engine inline 4 by putting maf in front of supercharger so pcm can read it) some of my customer bypassed it bought it to me i tell them bring back parts you took off of it they bought it back and i have to installed it set up so not bypassed any sensor and now it run like race car lol
Sounds like an angry cat when it's revving at the end of the video
Jean short cut offs in the shop is crazy
That aluminium is probably anodised you will need to grind the surface back a bit. And as everyone says you need to learn basics of how superchargers work 😂
sammit casually hittin that hawk tuah
Hawk Tuah! Gotta spit on that thang!
Miss Rachel references lol
Hope you build it right next time. K6A-T and Wagon R RR full body kit
4wd swap would make it heaps of fun
upgrade the Fuel system IMO
Get a genuine Mini Supercharger system for it
1JZ rear mount engine and RWD conversion be cool
Bov dumps pressure when the throttle body closes. Waste gate dumps exhaust when to much pressure to turbo.
This is a supercharger works different from turbo.similar but still different
Weird 13b vibes without the Brap Brap 🤣
A FuelTech on that car would do amazing for those crazy modifications, to set parameters and it automatically controlling it.
Sammit is link sponsored
🔥🔥🔥
I like it it's so cool😊😊
I dont waste my time remembering the spit part either, its about the ending!
That intake is going to sip some insane water if it rains
It’s called water injection!!! 👌🏼👌🏼👌🏼😭🤣😭
@@SAMMITcheap boy water meth injection
and please put an intake filter in front of the supercharger like put it behind the bumper infornt of the wheelwell there should be space i guess
Fuelolie pump be screening from all the back preassure
Nice hydrolock intake
mega loud, i question if there is a muffler at all! tho yes a smaller pulley is definitely going to lower the boost! also reason stuff gets hot, same as a AC, compressed gas gets hotter and decompressed gas gets colder. (so if you compress the gas, cool it then decompress it, you got an AC! but in the engine you got more power due to denser air.)
Perfect score on MaiMai arcade, Kei van edition