Ipapakita ko sa video na ito kung paano magtanggal at magkabit ng pedal ng bisikleta. In this video, I will show how to remove and install mountain bike pedals. Follow on Facebook: mekanikuno1
*Great **Latest.Bike** , good looking, good suspension and love the gearing. I've tested some bikes that were more then twice the price but not as good. Get lots of looks when riding.*
Normally kasi dapat ang nilalagay sa mga threaded application is Anti Seize Compound, High temp grease and water proof, lubricant and anti corossion. Standard grease kasi parang thickened oil tsaka not recommended sa mga threaded application. Long lasting ang anti Seize Compound compared sa grease. Grease is only applicable to bearings but anti Seize is applicable to threads.
Not really, hindi ibig sabihin lahat ng grease pwede gamitin sa lahat ng application. Why? Nasubukan ko na lagyan ng grease ang pedals ko, taena hindi matanggal ang hirap. That's when I thought maybe I need a grease that was specifically made for bolts and nuts, so basically Anti Seize compound gagamitin mo diyan. Anti Seize compound is a high temperature thread lubricant and anti corrosion.
It went together easily in less than an hour. czcams.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
Make sure tama yung direction ng pag tanggal. Iposition mo din yung wrench mo na makakapwersa ka. Pag sobrang tigas, sprayan mo ng penetrating oil sa thread ng pedal.
*Great **Latest.Bike** , good looking, good suspension and love the gearing. I've tested some bikes that were more then twice the price but not as good. Get lots of looks when riding.*
Very helpful especially sa newbie like me..salamat sir!
Yan! Ang galing magturo, simple at malinaw! Tnx and congrats sir for the nice demo.
so informative...
magaling mag demo...
thanks sir...may natutunan ako sayo...
God bless po
Thanks buti na lang nanood ako sa iyo kung hindi masisira yung bago kong bileng pedal tnx po
Salamat. Nice video idol. Straight to the point.
Laki ng problema ko sa pedal ko grasa lang pala kelangan salamat po at naka tulong saken itong video ride safe idol!
Ayos master may natutunan ako salamat
Thank youuuu bosss ngayon alam ko na paano palitan pedal ng bike ko😅
Yan dapat ganyan magdemonstrate.hindi ung madami pang paliguy ligoy gaya ng iba lalo tuluy dmo maintindihan 😅
si Lem Official dameng ebas HAHAHHAHA
@@juliusdreu8332 kaya lang parang di na active itong YT channel na ito. Eto pa naman ang pinaka cool lang mag explain at mag demo.
para daw po umabot 8 mins😂
@@letsgee6239 sana bumalik sa pag YT ang may ari ng account neto.
Agree. Straight to the point lang wala na masyado ebas. Solid na tutorial!
Galing mo po boss mag explain
Swabe lang hehe
Salamat po sa info!
Thanks my matutunan ako
Salamat lods natangal ko pero di ko nakabit salamat talaga
Maraming salamat sa video. Nakatulong ito sa pagkabit ko ng bagong pedal
Paano po pag naka allen wrench pang nakapasok at loss tred na yun buts ba pinapasukan ng allen wrech tools may tuturial kaba noon
Salamat, hehehe nakapag replace narin ng pedals.
15/16 MM wrench
Thankyou so much
same lang po ba ang ikot sa deore m6100?
Anung size ng wrench na ginamit mo lods? Thank you.
thank you.
magaling mgturo...
Thank you
ask lang po ano po pwedeng pang palit sa nilagay niyong fluid eh wala po kasi kaming ganon
Salamat po sa tutorial, kaya pala di ko matanggal ung isa kasi counterclockwise pala ung isa at clockwise naman ung isa hahaha
Sir pag size 15 Ang open wrench na gamit pangtanggal .ano dapat Ang size Ng pedal nna bibilhin kahit ano klase Ng pedal ba?
Boss pede ba lagyan Ng washer ang pedal para pang alalay
Hello po host nice tips thanks for sharing
Pwede po ba Allen wrench?
Anong grease po ginagamit nyo para sa pedal?
boss parihas lang po ba nang sizes ang mga pedal
Boss may sukat ba yung mga pedal?
Thankz
Boss ask lang yong pidal ng bike ko natanggal.pwede pa yon ibalik kahit may lost trade na...
Salamat lods
thank u lods
Anong brand ng pedals yan sir?
Saka san nakakabili?
Mga boss ano po ba ang cause ng pag loosethread ng crank sa may pedal insertion Banda?
Ano yun nilalagay mo kuys? Pwede ba wd40?
Ano po brand ng pedal nyo? At san nakabili pede pahingi link
Okay boss ♥️👍
Pano malalaman yung pinagkaiba ng pedal? Yung pedal na pang left tapos yung isa sa right
Pano pag naka welding yung pedal? Hindi masalpakan
kuya pano naman po pag matigas yung tatanggalin ano po yung gagamitin dun
Boss handle bar lang hehe idol kita
Pede bang d na lagyan ng grasa?
Anu pong size nung wrench
Salamat sa video sir..kaya pala ayaw matanggal tanggal Ng left pedal ko dahil Mali pala ang ikot Ng pagtanggal ko.
Same din pi hahaha...salamat po
Bakit po sakin hindi ganito. Yung sa standard bike ko, walang nut na pwede pihitan. Baklas pati yung crank.
Sir yung left pedal ko diko makabit linuluwa sya ng crank arm dipanaman losthread
Ganon din sakin ning tinangal ko
Thank you for sharing this vedeo
Bagong subscriber mo ako idol, ask ko lang po sa japanese bike ba pwede palitan ng pedal?
Lahat namn sir pwede palitan lalo kung sira na
anong size po ng open wrench
15
Saken po kuya eh ang tigas pano po ba?
Anong size po ng open wrench?
Size 15
Anong grasa yan?
tanong ko lang boss,,pare parehas ba ang size ng mtb pedals?
hindi boss, magkakaiba yung size ng mismong pedal. pero yung sa thread na iniikot ay pere parehas lang naman
Good pm paps ask ko po anong oil nilagay mo sa tread please reply back Thank you 😊😊😁😁🤗
Tamod
Mga boss balak ko sana mag palit ng pedal yung sakin kasi stock padin may mga sizes ba thread nyan? Or kahit anong bike pedal lang pwede?
Kung pang mtb naman iisa lang ang sukat. Yung mga kadalasan sa bike shops pang mtb yun. Meron isa pang sukat yung pang bmx mas maliit ng konti.
@@MekaniKuno ano size Ng pedal pang BMX at mga ordinary standard bike?
Kuya.kung wala pong grasa.na.ilalagay para sa pedal.npwede po ba un langis or.wd40???na ilagay.jan
Nope hindi recommend ang oil for threaded like bolts and nuts.
Even standard grease is not recommended
Pano po pag mahirap na tanggalin dahil na bilog na ang lag tatangalan sana masagot po
Kung sira na yung pedal, tanggalin mo yung pinaka platform nya hanggang axle nalang maiwan tapos gamitan mo ng vise grip, dun mo iikot.
Tanong kolang po, Ano po pangalan ng tools na pangtanggal dyan?
Open ended wrench.
Pano po malaman kung right ba or left yung pedal
May nakatatak yan L/R hanapin mo lang. Iba iba pwesto depende sa pedal.
Sa cleats pedals ganyan rin ba sir pag baklas at install?
What type of grease did u apply? Salamat
Normally kasi dapat ang nilalagay sa mga threaded application is Anti Seize Compound, High temp grease and water proof, lubricant and anti corossion. Standard grease kasi parang thickened oil tsaka not recommended sa mga threaded application. Long lasting ang anti Seize Compound compared sa grease. Grease is only applicable to bearings but anti Seize is applicable to threads.
Bat saken ayaw na parang lumuwag
Pano mlalaman kung pang kaliwa ung pedal
Nakanote may letter L at R
Ayos wla Ng cheche bureche...
Question po, ano po bang ibig sabihin pag "alloy-sealed bearing" ang isang pedal and anong advantage pag ito ang ginamit sa bike? Thanks.
Basically naka sealed yung bearing thus mas madali I replaced, durable pa siya.
@@jamesedmerdelacruz9478 sir James kahit ba BMX or ordinary bike ay pwede ba alloy sealed bearing?
Kahit anong grasa pede gamitin dyan
Not really, hindi ibig sabihin lahat ng grease pwede gamitin sa lahat ng application. Why? Nasubukan ko na lagyan ng grease ang pedals ko, taena hindi matanggal ang hirap. That's when I thought maybe I need a grease that was specifically made for bolts and nuts, so basically Anti Seize compound gagamitin mo diyan. Anti Seize compound is a high temperature thread lubricant and anti corrosion.
Papano malaman kng left or right side ang pedal.. Wala naman indicator..
May naka lagay sa pedal boss
It went together easily in less than an hour. czcams.com/users/postUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L Make sure the front fork is forward or the pedals will hit the front tire. Tires are both a little soft so it needs air before I ride it. The rear wheel didn't come with a clamp regular bolts hold it on. The front had the clamp. No scratches out of box. Rims are a little off with a slight wobble. They could have spent more time with the spoke tool fixing the run out. So far out of the box I'm happy with it. I did replace the pedals with a nice aftermarket set. After riding it a bit my A$$ is a bit sore so I ordered another seat. Overall I'm nearly 60 and didn't ride a bike in 30 years. I like my new 29" Schwinn. It will be used for casual rides with my friend.
parehas lang ba ang grasa at grease?
pwede ba grasa ilagay?
Short term pwede but long term not recommended
Anti Seize is meant for threads. Grease meant for bearings.
anong grasa gamit nyo ho?
Caltex Marfak
sir ano po kya pwede ilagay sa pedal na stuck na hirap tanggalin??
Penetrating oil (WD40). And make sure tama yung direction ng ikot mo.
@@MekaniKuno clockwise lang poba palagi?
@@SaltyFruth baliktaran po yan left and right. Refer to the video para sa direction.
Anong grasa gamit mo lods pwede naba ung saschet lng
Caltex MP3 gamit ko. Pwede naman any kind.
1:57 ganun pala HAHAHA diko nilagyan akin eh sorna agad
Ang hirap itanggalllll
Sir iisa ba ang size ng pedal???
9/16" yung common sa mtb. 1/2" yung sa bmx na one piece crank. Mas maliit.
@@MekaniKuno ok po salamat...
Ang akin po sobrang higpit
Make sure tama yung direction ng pag tanggal. Iposition mo din yung wrench mo na makakapwersa ka. Pag sobrang tigas, sprayan mo ng penetrating oil sa thread ng pedal.
MekaniKuno wala po kahit anong gawin d parin po maalis
crank arm naman paps
Meron na po. Kasama sa bottom bracket video ko po.
Thank you
Tanong nga po, kahit anong size pp ba ng pedal bilin ko e universal sa BMX type na bike?
Merong 1/2, meron ding 9/16. Kung pang MTB 9/16 naman lagi ang gamit. Sa mga one piece na BMX, yun yung gumagamit ng 1/2. Mas maliit yung kabitan.
@@MekaniKuno salamat po. Gusto ko lang maconfirm bago bumili ng pedal.